Parkside PFE 50 A1 User manual

IAN 270773

RODILLO ELÉCTRICO DE PINTURA

RULLO ELETTRICO PER PITTURA PFE 50 A1

RODILLO ELÉCTRICO DE PINTURA

Traducción del manual de instrucciones original

ELECTRIC PAINT ROLLER

Translation of the original instructions

ROLO DE PINTAR ELÉCTRICO

Tradução do manual de instruções original

RULLO ELETTRICO PER PITTURA

Traduzione delle istruzioni d’uso originali

ELEKTRO-FARBROLLER

Originalbetriebsanleitung

Page is loading ...

PFE 50 A1

GB

│

MT

│

31 ■

Contents

Introduction .....................................................32

Intended use ...............................................................32

Features ..................................................................32

Package contents ........................................................... 32

Technical data .............................................................32

General power tool safety warnings ................................33

1. Work area safety .........................................................33

2. Electrical safety .......................................................... 33

3. Personal safety ...........................................................34

4. Power tool use and care ...................................................34

5. Service ................................................................. 35

Additional safety instructions for paint rollers ......................................35

Working procedures .............................................35

Preparation for work .............................................36

Prepare the surface to be painted ..............................................36

Prepare the paint ...........................................................36

Prepare paint roller .......................................................... 36

Preparable coating materials ..................................................36

Non-workable coating materials ...............................................36

Assembly .......................................................36

Mounting/changing the paint roller .............................................36

Controls on the appliance .........................................36

Operation ......................................................36

Work breaks of up to 4 hours ................................................. 37

Longer work breaks .........................................................37

Shutting down and cleaning .......................................37

Storage ........................................................38

Disposal ........................................................38

Warranty .......................................................38

Service .........................................................39

Importer .......................................................39

Translation of the original Conformity Declaration .....................39

PFE 50 A1

■ 32

│

GB

│

MT

ELECTRIC PAINT ROLLER

PFE 50 A1

Introduction

Congratulations on the purchase of your

new appliance. You have selected a

high-quality product.

The operating instructions are part of this

product. They contain important informa-

tion on safety, usage and disposal. Before

using the product, familiarise yourself with all

operating and safety instructions.

Use the product only as described and for the

speciﬁed areas of application. Please also pass

on these operating instructions to any future owner.

Intended use

This appliance is intended exclusively for the appli-

cation of water-based dispersion and latex paints

to interior and exterior walls. Use this power tool

only if you can fully appreciate all the functions

and perform them without any restrictions or have

received the appropriate instruction.

Any other usage of or modiﬁcation to the appliance

is deemed to be improper and carries a signiﬁcant

risk of accidents. The manufacturer accepts no re-

sponsibility for damage(s) resulting from improper

usage. The appliance is not meant for commercial

use.

Features

Paint roller 20 mm

Inner roller

Cap

Roller bracket

On/oﬀ switch pump

Handle with supply hose

Base unit

Height-adjustable paint bucket attachment

Intake hose

Main switch

Mains plug

Extension adapter

Paint roller 12 mm

Lubricating grease

Package contents

1 electric paint roller PFE 50 A1

1 paint roller 230 mm, pile height 20 mm

(for textured and rough surfaces)

1 paint roller 230 mm, pile height 12 mm

(for smooth and slightly textured surfaces)

1 lubricating grease

2 adapter for extension poles

Technical data

Nominal power: 50 W

Rated voltage: 230 V

~

, 50 Hz

(alternating current)

Flow rate: Water: 750 ml/min

Wall paint: 650 ml/min

Protection class: II /

(double shielded)

Noise and vibration data:

Noise measurement value determined in accordance

with EN60745. The A-rated noise level of the

power tool is typically as follows:

Sound pressure level: L

pA

≤ 74.9 dB (A)

Uncertainty: K = 3 dB (A)

Sound power level: L

WA

≤ 85.9 dB (A)

Uncertainty: K = 3 dB (A)

Wear hearing protection!

Vibration emission value: a

h

< 1.178 m/s

2

Uncertainty: K = 1.5 m/s

2

NOTE

► The vibration level speciﬁed in these instruc-

tions has been measured in accordance

with the standardised measuring procedure

speciﬁed in EN 60745 and can be used to

make equipment comparisons. The speciﬁed

vibration emission value can also be used to

make an initial exposure estimate.

PFE 50 A1

GB

│

MT

│

33 ■

WARNING!

► The vibration level varies in accordance with

the use of the power tool and may be higher

than the value speciﬁed in these instructions

in some cases. Regularly using the power

tool in such a way may cause you to under-

estimate the vibration load. Try to keep the

vibration loads as low as possible. Measures

to reduce the vibration load include, e.g.

wearing gloves and limiting the working

time. Wherein all states of operation must be

included (e.g. times when the power tool is

switched oﬀ and times where the power tool

is switched on but running without load).

General power tool

safety warnings

WARNING!

► Read all safety warnings and instructions.

Failure to follow the warnings and instructions

may result in electric shock, ﬁre and/or serious

injury.

Save all warnings and instructions for future

reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-

operated (cordless) power tool.

1. Work area safety

a) Keep your work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

ﬂammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or

fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

2. Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way.

Do not use any adapter plugs with earthed

(grounded) power tools. Unmodiﬁed plugs

and matching outlets will reduce risk of electric

shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tric shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp

edges or moving parts. Damaged or entangled

cords increase the risk of electric shock.

e) When operating a power tool outdoors, use

an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces

the risk of electric shock.

f) If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD

reduces the risk of electric shock.

PFE 50 A1

■ 34

│

GB

│

MT

3. Personal safety

a) Stay alert, watch what you are doing and

use common sense when operating a power

tool. Do not use a power tool while you are

tired or under the inﬂuence of drugs, alcohol

or medication. A moment of inattention while

operating power tools may result in serious

personal injury.

b) Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat or

hearing protection used for appropriate condi-

tions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch

is in the oﬀ position before connecting to a

power source and/or battery pack, picking

up or carrying the tool. Carrying power tools

with your ﬁnger on the switch or energising

power tools that have the switch on invites

accidents.

d) Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key

left attached to a rotating part of the power

tool may result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewel-

lery or long hair can be caught in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used.

Use of dust collection can reduce dust-related

hazards.

4. Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at

the rate for which it was designed.

b) Do not use the power tool if the switch does

not turn it on and oﬀ. Any power tool that can-

not be controlled with the switch is dangerous

and must be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalign-

ment or binding of moving parts, breakage of

parts and any other condition that may aﬀect

the power tool’s operation. If damaged, have

the power tool repaired before use. Many ac-

cidents are caused by poorly maintained power

tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g) Use the power tool, accessories and tool

bits etc. in accordance with these instructions,

taking into account the working conditions

and the work to be performed. Use of the

power tool for operations diﬀerent from those

intended could result in a hazardous situation.

PFE 50 A1

GB

│

MT

│

35 ■

5. Service

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replace-

ment parts. This will ensure that the safety of

the power tool is maintained.

b) To avoid potential risks, if the appliance

power cable is damaged, it must be replaced

by the manufacturer, its customer service or

by a qualiﬁed technician.

Additional safety instructions for

paint rollers

■ Do not use the PAINT ROLLER for PAINTING

ﬂammable substances.

The PAINT ROLLER must not be cleaned with

ﬂammable solvents.

■ Do not PAINT with any substances whose

hazard levels are not known to you.

WARNING!

► Please follow the warnings, information and

data sheets provided by the paint manufac-

turer.

Wear a mask!

The inhalation of paint mist and solvent

vapours is harmful to health.

■ Work only in suﬃciently ventilated rooms.

Wear safety goggles!

This will protect your eyes from splashing

or leaking paint.

Working procedures

■ Note the mains voltage! The power source

voltage must conform to the details given on the

power tool nameplate. Power tools marked with

230 V can also be operated on a 220 V circuit.

■ Always place the base unit and paint bucket on

a level surface. When working on a ladder or a

sloping surface, there is a risk that the base unit

and the paint bucket could tip over. This could

cause injuries and paint spills.

■ Keep other electrical appliances at a safe dis-

tance while using the paint roller or cover them

up adequately. Possible paint splashes could

lead to accidents and soiling.

■ Wear appropriate work clothing. Paint is dif-

ﬁcult to remove from clothing.

■ Avoid any constrictions to the pipe system, e.g.

due to squeezing, bending or tugging! Do not

stand on the delivery hose.

■ Keep the hose system well away from heat

sources.

■ To avoid damage, do not carry or drag the ap-

pliance by its hoses.

■ If you intend to paint an entire room, paint the

ceiling ﬁrst and then the walls.

■ Start near light sources (e.g. windows) and then

work away from them.

■ Always paint an entire wall before taking a

long break from work.

■ If the extension adapter

is mounted, you

can hold the handle for more comfortable

working with both hands.

■ Always switch the pump oﬀ at the on /oﬀ

switch ﬁrst before switching oﬀ the appliance

at the main switch .

PFE 50 A1

■ 36

│

GB

│

MT

Preparation for work

Prepare the surface to be painted

The surface to be painted must be clean, dry

and free of grease. When working indoors, any

surfaces that have not been covered could get

soiled. Therefore, prepare the surrounding areas

thoroughly:

- Cover or tape over ﬂoors, furniture, doors and

window frames.

- Place suﬃcient covering material (plastic sheeting,

cardboard) under the paint bucket and base unit.

Prepare the paint

- Prepare the paint according to the manufacturer's

instructions.

- Stir the paint thoroughly and dilute it if necessary.

Prepare paint roller

♦ Before ﬁrst use, dampen the paint roller evenly

with clear water and wring out the excess.

Preparable coating materials

Water-based dispersion and latex paints for interior

and exterior walls.

Non-workable coating materials

Solvent-based paints and coatings and materials

containing heavily abrasive components.

Assembly

♦ Press the side locks on the handle downwards.

Fit the roller bracket , paying attention to the

guide slots (see ﬁg. A).

♦ Release the locks again to ﬁx the roller bracket

in place.

♦ Screw the extension adapter

into the handle

from below (see ﬁg. B).

♦ To ensure an easy assembling, apply a thin coat

of lubricating grease

at the marked points.

(see ﬁg. K + L).

NOTE

► You can also attach standard extensions for

paint rollers to the handle

(can be bought

separately in DIY stores). Push the extension

into the extension adapter

mounted for

this purpose. Plugging or screw the exten-

sion of this in one of two mounted extension

adapter

.

Mounting/changing the paint roller

♦ First push the inner roller to the paint roller

(see fold out page).

♦ Insert now the cap

in the paint roller

(see fold out page).

Controls on the appliance

Main switch :

♦ Switches the appliance on (“I”) and oﬀ (“O”).

On/oﬀ switch paint pump

:

♦ Press once and release to switch on the pump

to supply paint to the paint roller

.

♦ To switch oﬀ the pump, press the button again.

Operation

♦ Hold the height-adjustable paint bucket attach-

ment to the side and pull upwards (see ﬁg. C).

♦ Place the paint bucket on the section “X” (see

ﬁg. D) so that the handle of the paint bucket is

between the two brackets.

NOTE

► Important: The handle on the paint bucket

must be between the two brackets. Other-

wise, the bucket could tip and spill paint

while being carried.

♦ Push the height-adjustable paint bucket attach-

ment

downwards to ﬁx the paint bucket in

place (see ﬁg. E).

♦ Fix the intake hose

into the bracket and push

it down to the bottom of the paint bucket (see

ﬁg. F).

♦ Switch on the appliance using the main switch

.

PFE 50 A1

GB

│

MT

│

37 ■

♦ Press the on/oﬀ switch on the handle to start

the pump, drawing paint into the roller via the

hose (depending on the type of paint, this can

take up to 1 minute).

♦ Once the paint has reached the paint roller

and this has soaked with color, you can start

painting.

♦ Turn oﬀ the on/oﬀ switch

while painting.

♦ Press the on/oﬀ switch

when you need to

re-color of the paint roller .

Work breaks of up to 4 hours

♦ Switch oﬀ the appliance.

♦ Place the paint roller

immediately into a

plastic bag and tie it air-tight.

♦ Leave the intake hose in the paint.

Longer work breaks

♦ Switch oﬀ the appliance.

♦ Place the paint roller

in a bucket ﬁlled

with water.

♦ Leave the intake hose

in the paint.

♦ Sprinkle a little water onto the surface of the

paint in the paint container to stop it from form-

ing a skin.

Shutting down and cleaning

Thorough cleaning is essential for proper

operation of the paint application appliance.

No warranty claims will be accepted for

insuﬃcient or improper cleaning.

NOTE

► Only use water for cleaning. Ideally, use luke-

warm water with a little dishwashing liquid.

♦ Switch oﬀ the appliance on the main switch

(“O”)

.

♦ Scrape the paint roller

oﬀ on the edge of

the paint container.

♦ Remove the paint roller

by pressing the

locks on the roller bracket .

♦ Hold the paint roller

ﬁrmly with a cloth

and push the cap

downwards to lever it out

(see ﬁg. G). Pull the inner roller

out of the

paint roller

.

♦ Clean all parts of the paint roller

in luke-

warm water.

♦ Hang the end of the intake hose

in a bucket

of water (see ﬁg. H).

♦ Switch on the appliance on the main switch

(“I”)

.

♦ Hold the roller bracket

over the paint bucket

and press the on/oﬀ switch to pump the

paint out of the hose into the paint bucket (see

ﬁg. I).

♦ Switch the pump oﬀ again as soon as water

starts coming out of the roller bracket

.

♦ Hang the roller bracket

in a bucket of water

(see ﬁg. J). If available, you can also hang the

roller bracket in an empty bucket. This will

prevent dirty water from being pumped back

into the system and improves the cleaning

eﬀect.

♦ Press the on/oﬀ switch

to start the self-

cleaning process. Circulate water through the

appliance for about 10 minutes to clean it. If

necessary, replace the water.

NOTE

► It is possible that minor paint residues remain

in the hose. This is normal and has no nega-

tive inﬂuence on future work.

CAUTION!

► After cleaning, pump all of the water out of

the appliance and the hose. If any water

remains in the pump, there is a risk of ice

damage if the temperature falls below 0°C.

♦ Remove the roller bracket

from the handle .

♦ Wipe all parts thoroughly to assure proper

functioning.

PFE 50 A1

■ 38

│

GB

│

MT

WARNING!

► Do not immerse the handle

in water dur-

ing cleaning.

♦ If required, wipe of the other parts of the appli-

ance.

Storage

CAUTION!

► Drain and dry the appliance before storing it

in a frost-free location.

■ Store the appliance so that it cannot be used by

unauthorised persons.

Disposal

The packaging consists of environmentally

friendly material. It can be disposed of in

the local recycling containers.

Do not dispose of power tools in

your normal household waste!

European Directive 2012/19/EU requires that

worn-out power tools be collected separately and

recycled in an environmentally compatible manner.

Your local community or municipal authorities can

provide information on how to dispose of the worn-

out appliance.

Warranty

This appliance is provided with a 3-year

warranty, valid from the date of purchase.

The appliance has been manufactured with

care and inspected meticulously prior to

delivery. Please retain your receipt as proof

of purchase. In the event of a warranty claim,

please contact your Customer Service unit by

telephone. This is the only way to guarantee

the free return of your goods.

The warranty only covers claims for material and

manufacturing defects, not for damage sustained

during carriage, components subject to wear and

tear or damage to fragile components such as

switches or batteries. This appliance is intended

solely for private use and not for commercial

purposes. The warranty shall be deemed void in

cases of misuse or improper handling, use of force

and modiﬁcations/repairs which have not been

carried out by one of our authorised Service

centres. Your statutory rights are not restricted by

this warranty. The warranty period is not prolonged

by repairs eﬀected under the warranty. This also

applies to replaced and repaired components. Any

damage and defects present at the time of

purchase must be reported immediately after

unpacking, but no later than two days after the

date of purchase. Repairs carried out after expiry

of the warranty period shall be subject to charge.

PFE 50 A1

GB

│

MT

│

39 ■

Service

WARNING!

► Have your power tool repaired by qualiﬁed

specialists only. Always use genuine spare

parts. This will ensure that the safety of the

power tool is maintained.

WARNING!

► Plugs and power cables should only be re-

placed by the manufacturer of the power tool

or the manufacturer's authorised customer

service agent. This will ensure that the safety

of the power tool is maintained.

NOTE

► Replacement parts not listed (such as carbon

brushes, switches) can be ordered via our

service hotline.

Service Great Britain

Tel.: 0871 5000 720 (£ 0.10/Min.)

E-Mail: [email protected]

IAN 270773

Service Malta

Tel.: 80062230

E-Mail: [email protected]

IAN 270773

Importer

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Translation of the original

Conformity Declaration

We, KOMPERNASS HANDELS GMBH,

documents oﬃcer: Mr. Semi Uguzlu, BURGSTR. 21,

44867 BOCHUM, GERMANY, hereby declare that

this product complies with the following standards,

normative documents and EC directives:

Machinery Directive

(2006/42/EC)

EMC (Electromagnetic Compatibility)

(2014/30/EU)

RoHS Directive

(2011/65/EU)

Applied harmonised standards:

EN 60745-1: 2009/A11: 2010

EN 50580: 2012/ A1: 2013

EN 55014-1: 2006/A2: 2011

EN 55014-2: 1997/A2: 2008

EN 61000-3-2: 2014

EN 61000-3-3: 2013

Type designation of machine:

Electric paint roller PFE 50 A1

Year of manufacture: 11 - 2016

Serial number: IAN 270773

Bochum, 02/10/2015

Semi Uguzlu

- Quality Manager -

The right to eﬀect technical changes in the context

of further development is reserved.

Page is loading ...

IAN 270773

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

DEUTSCHLAND / GERMANY

www.kompernass.com

Estado de las informaciones · Versione delle informazioni · Estado

das informações · Last Information Update · Stand der Informationen:

03 / 2016 · Ident.-No.: PFE50A1-112015-2

Parkside PFE 50 A1 User manual

Parkside PFE 50 A1 User manual

in other languages

Related papers

Other documents