ENGLISH
Model 99Ci
Press and hold forward ( )
2-3seconds
2
4
PRODUCT MAINTENANCE
TROUBLESHOOTING
CLEANING AUTO-START INFRARED SENSORS
Paperdetectionsensorsaredesignedformaintenancefreeoperation.However,onrareoccasionsthesensors
maybecomeblockedbypaperdustcausingthemotortorunevenifthereisnopaperpresent.
(Note: two paper detection sensors are located in the center of the paper entry).
Allcross-cutshreddersrequireoilforpeakperformance.Ifnotoiled,a
machinemayexperiencediminishedsheetcapacity,intrusivenoisewhen
shreddingandcouldultimatelystoprunning.Toavoidtheseproblems,we
recommend you oil your shredder each time you empty your waste bin.
OILING SHREDDER
*Only use a non-aerosol vegetable oil in long
nozzle container such as Fellowes 35250
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
*Apply oil across entry
1
TO CLEAN THE SENSORS
1
Turnoffandunplug
shredder
LocateAuto-start
infared sensor
Dip cotton swab in
rubbing alcohol
Usingcottonswab,wipe
away any contamination
from the paper sensors
54
3
Should you choose to disable the
system,pressandholdtheauto
button (blue) and reverse ( )
keyatthesametime
DISABLING THE FEATURE
Oncedisabled,theblue
Auto light is no longer
illuminated(Tore-engage,
repeat step 1)
Shredding can continue with the
systemdisabled,howeverapaper
jammayoccurwithtoomanysheets
and Remove Paper icon
( )
will illuminate
If steps 4 and 5 do not clear
jam,reversepaperalltheway
out,removeseveralsheets
and refeed
6
1
2
Ifjamoccurs,pressandhold
forward()keyuntilthe
document is completely through
the shredder
3
Ifnotcleared,pressreverse
( ) briefly (repeat steps
4 and 5 until shredded)
Eliminates paper jams and powers through tough jobs
JAM PROOF SYSTEM*
*100%JamProofwhenusedinaccordancewithusermanual
5
3
4
5
3
5
A B C D E
A. Overheat Indicator: WhentheOverheatIndicatorisilluminated,theshredderhasexceededitsmaximum
operatingtemperatureandneedstocooldown.Thisindicatorwillremainilluminatedandtheshredderwill
not operate for the duration of the recovery time. See Basic Shredding Operation for more information about
the continuous operation and recovery time for this shredder.
B. Bin Open:Theshredderwillnotrunifthebinisopen.
Whenilluminated,closethebintoresumeshredding.
C. Bin Full:Whenilluminated,theshredderwastebinisfullandneedstobeemptied.
Use Fellowes waste bag 36053.
D. Remove Paper:Whenilluminated,pressreverse(
) and remove paper.
Reducepaperquantitytoanacceptableamountandrefeedintopaperentry.
E. SafeSense
®
Indicator:Ifhandsaretooclosetothepaperentry,theSafeSense
®
indicator will illuminate
and the shredder will stop shredding. If SafeSense
®
isactivefor3seconds,theshredderwillautomatically
turn off and the user must press the power button on the control panel to resume shredding.