Triad 51040-1000-1 Quick start guide

Triad
Brand
Triad
Model
51040-1000-1
Category
Soundbar speakers
Type
Quick start guide

This manual is also suitable for

Triad Speakers Warranty Information
For your convenience, we have included space below for you to record your
speaker model and serial number, purchase date, dealer’s name, and phone
number. You will need the following information in the event your speaker needs
servicing. Please keep this manual and the sales receipt in a safe place.
Model: ___________________ Serial #: __________________
Dealer Name: _______________________________________
Purchase Date:____________ Phone #: __________________
Triad North American Warranty
Triad speakers are warranted to be free from defects in materials and workman-
ship for a period of ten (10) years, when operated under normal conditions.
This Limited Warranty Period Begins on the Date of Purchase
This limited warranty is extended only to Triad products and is expressly in lieu
of all other warranties expressed or implied.
Should any defect in materials or workmanship occur within the limited warranty
period, customers in the United States should contact Triad Customer Service
at 1-877-264-6315, to obtain a Return Authorization (RA) Number. Customers in
Europe should contact their dealer for service.
The product should be returned in its original packaging together with proof and
date of purchase with the RA number clearly visible on outside of the box. At our
discretion, we will repair or replace the product and return it, free from charge.
If you do not have the original packaging for the product, contact your dealer or
Triad Service, and we will provide it for you.
Triad Speakers, Inc.
15835 NE Cameron Blvd. • Portland, Oregon 97230
503.256.2600 Sales • 877.264.6315 Toll Free Service
www.triadspeakers.com
Made in the USA and Canada
Triad Speakers, Incorporated - Portland, Oregon
www.triadspeakers.com
InCeiling Rounds - Installation Manual
2010.12.15
InCeiling SealedRounds & OpenRounds Product Family
.JOJ4FBMFE3PVOE
.JOJ0QFO3PVOE
#SPO[F4FBMFE3PVOE
4JMWFS4FBMFE3PVOE
4JMWFS%54FBMFE3PVOE
#SPO[F0QFO3PVOE
4JMWFS0QFO3PVOE
4JMWFS%50QFO3PVOE
0QUJPOBM4RVBSF(SJMM"WBJMBCMF
Features Specifi cationsInstallation
Appendix
pg. 2 - Triad InCeiling Rounds Installation Manual
Message from the President
About your new Triad InCeiling Rounds
Thank You...
For purchasing Triad’s line of round, compact inceiling speakers.
We designed and engineered each loudspeaker with pride in the United States
of America with the utmost attention to quality, décor-friendly design, and high
performance sound.
With ultraslim frameless grills, optional square grills, and custom paint matching
in Triad’s Portland factory, these speakers blend perfectly into any interior design.
All models are fully engineered to deliver the rich natural sound Triad is famous for.
We offer two versions, each designed and engineered to perform best in its own
acoustical environment:
OpenRounds for installations lacking depth.
SealedRounds with acoustically dampened metal backcans, f uted for
greater rigidity and reduced resonances, to produce tighter and more
consistent bass and to increase noise isolation in adjoining areas.
Both versions share:
• Low mass carbon f ber woofers (optimized for each version) for detailed
sound and dynamics.
• Premium fabric dome tweeters for sweet, airy high frequencies.
• Diecast aluminum bezels and parts for greater rigidity and longevity.
Our dual tweeter (DT) model has the f exibility to perform as a great stereo (dual
channel) speaker, dipole surround, or bipole surround.
We trust that you will hear the benef ts of this engineering each time you play them.
Thanks again and happy listening.
Larry Pexton
President of Triad Speakers, Inc.
Finish Maintenance & Care
The paint f nish on all Triad speakers are designed to last a lifetime with minimal
care. If cleaning the surface becomes necessary, gently wipe the speaker grill
with a soft cloth lightly dampened with a mild soap and water solution.
Custom Paint
Custom paint is available from Triad at the time your speaker is ordered.
If you supply us with an actual paint sampler, we can paint your new speaker any
color you wish. The results will be superior, and you will also be supplied with a
small bottle of touch-up paint.
InstallationSpecifi cations FeaturesAppendix
Triad InCeiling Rounds Installation Manual - pg. 11
Notes:
Features Specifi cationsInstallation Appendix
pg. 10 - Triad InCeiling Rounds Installation Manual
Specifi cations SealedRound:
InCeiling Mini SealedRound
Cabinet Dimensions:
Inside Ring Diameter 6-7/16” (16.3cm)
Mounting Depth 7” (17.8cm)
Hole Cut Out | NCB: 6-1/2 (16.5cm) | RM
Grill: 7-3/8 (18.7cm)
Product Weight:
5.4 lbs. each (2.4kg)
Shipping Weight:
(2 per box)
13.7 lbs. (6.2kg)
Drive Units:
(1) 1” (25mm) Fabric dome tweeter.
(1) 4” (11cm) Carbon f ber woofer.
Sensitivity:
86 dB/1W/1m
Installed Frequency Response:
95 Hz - 20 kHz (+/-3dB)
Power Handling:
Rec. amp. power 25 - 75 watts
Impedance:
Nominal impedance 8 ohms
InCeiling Bronze SealedRound
Cabinet Dimensions:
Inside Ring Diameter 7-3/4” (19.6cm)
Mounting Depth 7-7/8” (20cm)
Hole Cut Out | NCB: 7-7/8 (20cm) | RB
Grill: 8-5/8 (21.9cm)
Product Weight:
7 lbs. each (3.2kg)
Shipping Weight:
(2 per box)
18.4 lbs. (8.3kg)
Drive Units:
(1) 1” (25mm) Fabric dome tweeter.
(1) 5-1/4” (14cm) Carbon f ber woofer.
Sensitivity:
85 dB/1W/1m
Installed Frequency Response:
85 Hz - 20 kHz (+/-3dB)
Power Handling:
Rec. amp. power 25 - 75 watts
Impedance:
Nominal impedance 8 ohms
InCeiling Silver SealedRound
Cabinet Dimensions:
Inside Ring Diameter 9-3/8” (23.8cm)
Mounting Depth 7-13/16” (19.9cm)
Hole Cut Out | NCB: 9-1/2 (24.1cm) | RS
Grill: 10-1/4 (26.1cm)
Product Weight:
8 lbs. each (3.6kg)
Shipping Weight:
(2 per box)
21.8 lbs. (9.9kg)
Drive Units:
(1) 1” (25mm) Fabric dome tweeter.
(1) 6-1/2” (17cm) Carbon f ber woofer.
Sensitivity:
87 dB/1W/1m
Installed Frequency Response:
90 Hz - 20 kHz (+/-3dB)
Power Handling:
Rec. amp. power 25 - 125 watts
Impedance:
Nominal impedance 8 ohms
InCeiling Silver DT SealedRound
Cabinet Dimensions:
Inside Ring Diameter 9-3/8” (23.8cm)
Mounting Depth 7-13/16” (19.9cm)
Hole Cut Out | NCB: 9-1/2 (24.1cm) | RS
Grill: 10-1/4 (26.1cm)
Product Weight:
8 lbs. each (3.6kg)
Shipping Weight:
11.9 lbs. each (5.4kg)
Drive Units:
(2) 1” (25mm) Fabric dome tweeter.
(1) 6-1/2” (17cm) Carbon f ber woofer.
Sensitivity: (each channel)
87 dB/1W/1m
Installed Frequency Response:
80 Hz - 20 kHz (+/-3dB)
Power Handling:
Rec. amp. power 25 - 125 watts
Impedance:
Nominal impedance 8 ohms
InstallationSpecifi cations FeaturesAppendix
Triad InCeiling Rounds Installation Manual - pg. 3
Table of Contents
Features
Message from the President - About your
new Triad InCeiling Rounds 2
Finish Care & Custom Paint 2
Installation
New Construction & Retro-f t 4
Speaker Grill Installation & Removal 6
W
iring
Single Tweeter Models 7
Dual Tweeter (DT) Models 7
Specifi cations
InCeiling OpenRounds 9
InCeiling SealedRounds 9
Appendix
Warranty BC
Features Specifi cationsInstallation Appendix
pg. 4 - Triad InCeiling Rounds Installation Manual
Use a stud finder to locate the two joists between the location in which you
wish to install the speaker. Snap off excess wing along score as needed.
Using the enclosed hole cut out template as a guide, mark the outline on the wall
with pencil. Cut along outlined mark with a drywall knife/saw slowly, trying not to
chip out the drywall excessively.
1. On the back of the speaker you’ll f nd a single set of push-type speaker
connectors. DT models have two sets for left (IN1) and right (IN2) speakers
in a 2-channel system.
2. For each speaker, push the connector head down exposing a hole in which
you insert the speaker wire. Releasing the head locks it onto the wire.
3.
To keep polarity correct, connect amplifier’s + (positive) to speaker’s + and
the amplifier’s – (negative) to the speakers –. To avoid shorts, keep stray
strands clear of adjoining connectors.
New Construction Installation:
Locate where speaker will be placed in the wall/ceiling. When installed the speaker may
take up the full cavity within the NCB location (i.e. keep clear of electrical wires, HVAC,
etc.). Position bracket between the desired two joists/studs so the flange protrudes out
for drywallers to sheetrock around. Attach screws through attachment holes on NCB.
Retro-fi t & Wiring installation:
!TTACH.#"TOSTUDSORJOISTSUSINGSCREWSTHROUGHHOLES.
InstallationSpecifi cations FeaturesAppendix
Triad InCeiling Rounds Installation Manual - pg. 9
Specifi cations OpenRound:
InCeiling Mini OpenRound
Cabinet Dimensions:
Inside Ring Diameter: 6-7/16” (16.3cm)
Mounting Depth: 3” (10.4cm)
Hole Cut Out | NCB: 6-1/2 (16.5cm) | RM
Grill: 7-3/8 (18.7cm)
Product Weight:
3.4 lbs. each (1.5kg)
Shipping Weight:
(2 per box)
9 lbs. (4.2kg)
Drive Units:
(1) 1” (25mm) Fabric dome tweeter.
(1) 4” (11cm) Carbon f ber woofer.
Sensitivity:
86 dB/1W/1m
Installed Frequency Response:
85 Hz - 20 kHz (+/-3dB)
Power Handling:
Rec. amp. power 25 - 75 watts
Impedance:
Nominal impedance 8 ohms
InCeiling Bronze OpenRound
Cabinet Dimensions:
Inside Ring Diameter: 7-3/4” (19.6cm)
Mounting Depth: 4-1/8” (10.4cm)
Hole Cut Out | NCB: 7-7/8 (20cm) | RB
Grill: 8-5/8 (21.9cm)
Product Weight:
4.2 lbs. each (1.9kg)
Shipping Weight:
(2 per box)
11 lbs. (5kg)
Drive Units:
(1) 1” (25mm) Fabric dome tweeter.
(1) 5-1/4” (14cm) Carbon f ber woofer.
Sensitivity:
85 dB/1W/1m
Installed Frequency Response:
65 Hz - 20 kHz (+/-3dB)
Power Handling:
Rec. amp. power 25 - 75 watts
Impedance:
Nominal impedance 8 ohms
InCeiling Silver OpenRound
Cabinet Dimensions:
Inside Ring Diameter 9-3/8” (23.8cm)
Mounting Depth 4-1/16” (10.4cm)
Hole Cut Out | NCB: 9-1/2 (24.1cm) | RS
Grill: 10-1/4 (26.1cm)
Product Weight:
5 lbs. each (2.2kg)
Shipping Weight:
(2 per box)
12.4 lbs. (5.6kg)
Drive Units:
(1) 1” (25mm) Fabric dome tweeter.
(1) 6-1/2” (17cm) Carbon f ber woofer.
Sensitivity:
87 dB/1W/1m
Installed Frequency Response:
70 Hz - 20 kHz (+/-3dB)
Power Handling:
Rec. amp. power 25 - 125 watts
Impedance:
Nominal impedance 8 ohms
InCeiling Silver DT OpenRound
Cabinet Dimensions:
Inside Ring Diameter 9-3/8” (23.8cm)
Mounting Depth 4-1/16” (10.4cm)
Hole Cut Out | NCB: 9-1/2 (24.1cm) | RS
Grill: 10-1/4 (26.1cm)
Product Weight:
5.3 lbs. each (2.4kg)
Shipping Weight:
7.4 lbs. each (3.4kg)
Drive Units:
(2) 1” (25mm) Fabric dome tweeter.
(1) 6-1/2” (17cm) Carbon f ber woofer.
Sensitivity: (each channel)
87 dB/1W/1m
Installed Frequency Response:
60 Hz - 20 kHz (+/-3dB)
Power Handling:
Rec. amp. power 25 - 125 watts
Impedance:
Nominal impedance 8 ohms
Snap off excess wing along
score as needed.
After sheetrock, place speaker into large hole.
Features Specifi cationsInstallation Appendix
pg. 8 - Triad InCeiling Rounds Installation Manual
Tuning: Special Applications
Dual Tweeter Models Continued:
Bipole Surround Mode
Used for surround speaker applications where a more diffuse sound f eld is
desired compared to a direct radiating speaker. Tweeters are in phase and
typically aimed in opposite directions.
Dipole Surround Mode
Used for surround speaker applications where a very diffuse and enveloping
soundf eld is desired. Tweeters are out of phase and typically aimed in opposite
directions.
Tweeter Orientation Bipole Switch
Inputs/Mono Switch
to Mono
Tweeter Orientation Dipole Switch
InstallationSpecifi cations FeaturesAppendix
Triad InCeiling Rounds Installation Manual - pg. 5
Retro-fi t & Wiring installation: continued
4. Make sure that the Stereo/Mono switch is set for your intended application.
5. Place the speaker into the hole. Do not lift or carry the speaker using tweeter
arm(s). Rotate the speaker so the tweeter(s) are positioned to be properly aimed.
6. Tighten the three Phillips screws located on the speaker’s front baff e (see
drawing above) to rotate and tighten the dogs to the sheetrock.
7. Make sure the Tuning Switch on the front baff e is set for your intended application.
8. Aim the tweeters if desired and install the grill.
Dogs will move
outward and tighten
to secure speaker to
sheetrock
Earthquake Tabs:
There are three Earthquake tabs
on the back of the SealedRound
back can.
Use cables secured through these
tabs to either attach the speaker to
building structure for earthquakes
or to f y the speaker from an open
ceiling.
Always check that this work is done
to applicable codes.
to Bipole
toDipole
Inputs/Mono Switch
to Mono
Features Specifi cationsInstallation Appendix
pg. 6 - Triad InCeiling Rounds Installation Manual
Speaker Grill Installation & Removal:
Attach the metal grill to the frame by placing the grill over the edge of the frame.
Grill will self-center onto the magnet system.
To remove the grill, grab the edge of the grill and gently pull away.
Grill Scrim:
Our optional square grills include a sheet with four dark corner scrims.
These are used to line the inside corners of the square grills on light colored
walls and ceilings so that the contrast of the speaker baff e is not visible through
the grill. Simply transfer the four corner scrims to the corresponding corners on
the inside of the grill, with the glue side to the grill..
$PSOFSTDSJNXJUIHMVF
POQBQFS
4RVBSF(SJMM
4RVBSF(SJMM
InstallationSpecifi cations FeaturesAppendix
Triad InCeiling Rounds Installation Manual - pg. 7
Single Tweeter Models:
Tweeters on all models can be aimed up to 30 degrees in each direction around
the axis of their arms to vary their sound distribute pattern as desired.
DT: For typical dipole or diffuse Bipole applications, angle both tweeters in
opposite directions at their 30 degree extremes.
Dual Tweeter Models:
There are three primary applications for DT (Dual Tweeter) models.
Each application requires a different combination of Tweeter Orientation &
Bipole/Dipole Switch setting on the front baff e and Input Connections & Stereo/
Mono Switch setting on the back.
Stereo Mode (Factory Default)
Plays both channels of a two-channel system through a single speaker. This is
appropriate for areas where stereo separation is not desired, such as bathrooms,
dressing rooms, hallways, etc. This is the default setting as the speaker is
delivered to you from the factory. Both tweeters are in phase.
Tuning: Special Applications
Tweeter Orientation Bipole Switch Inputs/Stereo Switch
to Bipole to Stereo
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Triad 51040-1000-1 Quick start guide

Triad
Brand
Triad
Model
51040-1000-1
Category
Soundbar speakers
Type
Quick start guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents