Polaroid tdae-03219 User manual

Brand: Polaroid

Model: tdae-03219

Category: Blu-Ray players

Type: User manual

Polaroid tdae-03219 is a 32" widescreen TV with a native resolution of 1366x768 for full HD performance. It has an integrated ATSC TV tuner for true digital connections and an HDMI input for true digital connections as well. Additionally, it has a VGA port to connect to a PC and a built-in DVD player. With its wide range of connectivity options, Polaroid tdae-03219 is a versatile device that can be used for watching TV, playing DVDs, or connecting to a PC.

11Last Page

21Last Page

31Last Page

Safety Information

IMPORTANT SAFETY INSTRUCTIONS

1. READ INSTRUCTIONS- All the safety and operating instructions should be read before the product is

operated.

2. RETAIN INSTRUCTIONS- The safety and operating instructions should be retained for future

reference.

3. HEED WARNINGS- All warnings on the product and in the operating instructions should be adhered

to.

4. FOLLOW INSTRUCTIONS- All operating and use instructions should be followed.

5. CLEANING- Unplug this product from the wall outlet before cleaning; Do not use liquid cleaners or

aerosol cleaners. Use a damp Cloth for cleaning.

6. ATTACHMENTS- Do not use attachments not recommend by the product manufacturer as they may

cause hazards.

7. WATER AND MOISTURE- Do not use this product near water-for example, near a bath tub, wash

bowl, sink, or laundry tub; in a wet basement, or near a swimming pool, and the like.

8. ACCESSORIES- Do not place this product on an unstable cart, stand tripod, bracket, or table. The

product may fall, causing serious injury to a child or adult and serious damage to the product. Use

only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with

the product. Any mounting of the product should follow the manufacturer’s instructions, and

should use a mounting accessory recommended by the manufacturer.

9. A product and cart combination should be moved with care. Quick stops, excessive force

and uneven surfaces may cause the appliance and cart combination to overturn.

10. VENTILATION- Slots and openings in the cabinet are provided for ventilation and to ensure

reliable operation of the product and to protect it from overheating, and these

openings must not be blocked or covered. The opening should never be blocked by

placing the product on a bed, sofa, rug, or other similar surfaces.

41Last Page

Safety Information

This product should not be placed in a built-in installation such as a book case or rack unless proper

ventilation is provided or the manufacturer’s instructions have been adhered to.

11. POWER SOURCE- This product should be operated from the type of power source indicated on the

marking label. If you are not sure of the type of power supply to your home, consult your product

dealer or local power company. For product intended to operate from batter power, or other

sources, refer to operating instruction.

12. GROUND and POLARIZATION- This product may be equipped with a polarized alternating current

line plug (a plug having one blade wider than the other), this plug will fit into the power outlet only

one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try

reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete

outlet. Do not defeat the safety purpose of the polarized plug.

ALTERNATIVE WARNINGS- This product is equipped with a three-wire ground-type plug, a plug

having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a

safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace

your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

13. POWER-CORD PROTECTION- Power supply cords should be routed so that they are not likely to be

walked on or pinched by items placed upon or against them, paying particular attention to cords at

plugs, convenience receptacles, and point where they exist from the product.

14. PROTECTIVE ATTACHEMENTS PLUG- The product is equipped with an attachment plug having

overload protection. This is a safety feature. See instruction Manual for replacement or resetting of

protective device. If replacement of the plug is required, be sure the service technician has used a

replacement plug specified by the manufacturer that has the same overload protection as the

original plug.

15. OUTDOOR ANTENNE PLUG- If an outside antenna is connected to the receiver, be sure the antenna

system is grounded so as to provide some protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with

regards to proper grounding of the mast and supporting structure, grounding of the lead-in wire to

an antenna-discharge unit, size of grounding conductors, location of antenna-discharge unit,

connection to grounding electrodes and requirements for the grounding electrodes.

16. LIGHTING- For added protection this product during a lighting storm, or when it is left unattended

and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or

cable system. This will prevent damage to the product due to lighting and power-line surges.

51Last Page

Safety Information

17. POWER LINES- An outside antenna system should not be located in the vicinity of overhead

power lines or other electric light or power circuits, or where it can fall into such power lines or

circuits. When installing an outside antenna system, extreme care should be taken to keep

from touching such power lines or circuits as contact with them might be fatal.

18. OVERLOADING- Do not overload wall outlets, extension cords or Integral convenience

receptacles as this can result in a risk of fire or electrical shock.

19. OBJECT AND LIQUID ENTRY- Never push objects of any kind into this product through

openings as they may touch dangerous voltage points or short-out parts that could result in a

fire or electrical shock. Never spill liquid of any kind on the product.

20. SERVICING- Do not Attempt to service this product yourself as opening or removing covers

may expose you to dangerous voltage or other hazards. Refer all serving to qualified service

personal.

21. DAMAGE REQUIRING SERVICE- Unplug this product from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

a) When the power-supply cord or plug is damaged

b) If liquid has been spilled, or objects have fallen into the product.

c) If the product has been exposed to rain or water.

d) If the product does not operate normally by following the operating

instructions, adjust only those controls that are covered by the operating

instructions as an improper adjustment of other controls may result in

damage and will often require extensive work by a qualified technician to

restore the product to its normal operation.

e) If the product has been dropped or damaged in any way, and.

f) When the product exhibits a distinct change in performance- this indicates a

need for service.

22. REPLACEMENT PARTS- When replacement parts are required, be sure the service

technician has used replacement parts specified by the manufacturer or have the

same characteristics as the original part. Unauthorized substitutions may result in

fire, electric shock, or other hazards.

23. SAFETY CHECK- Upon completion of any service or repairs to this product, ask the

service technician to perform safety checks to determine that the product is in

proper operating condition.

24. WALL OR CEILING MOUNTING- The product should be mounted to a wall or

ceiling only as recommended by the manufacturer.

25. HEAT- The product should be situated away from heat sources such as radiators,

heat registers, stoves, or other products (including amplifiers) that produce heat.

WARNING: Changes or modifications to this unit not expressively approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

61Last Page

Contents

Unit and Accessories

Stand Base Screws x9

Stand Neck

TV Set

Manual Adaptor Batteries

Remote

Products and Features

• 32”(31.5 measured diagonally) wide screen TV

• 1366(H) x 768 (V) native resolution for Full-HD performance

• Integrated ATSC TV tuner for true digital connections

• HDMI® input for true digital connections

• VGA port for connection to PC

• Built-in DVD Player

HDMI is a trademark of HDMI licensing LLC in the United States and other countries.

71Last Page

Location of Controls

Introduction

Front View

1. Speaker

2. Stand Base

3. Power indicator

4. Remote Sensor

Note : IR Infrared Receiver IR signals

from the remote control.

(Power on/Standby) LED Indicator:

Press Power to turn on and off.

Side View

1. DVD Slot

2. Input Button

3. Menu Button

4. Channel up button

5. Channel down button

6. Volume up button

7. Volume down button

8. Play button

9. Eject

10. Power Button

The effective receiving range for the signal is 5-8

meters from the remote control window and 30

the left or right side and 20

above or below the

remote window.

81Last Page

Location of Controls

Rear View

1. Headphone Jack 7. HDMI 3

2. PC Audio IN 8. Coaxial

3. 75 ohm Antenna Socket/Cable 9. USB Input

4. PC IN 10.Composite : Video Input

5. HDMI Input 1 11.Component Video Input

6. HMDI Input 2 12. L/R Audio Output

1 2 3 4 5

91Last Page

Wall Mounting

A wall mount kit (purchased separately) would allow you to mount your TV on the wall. For detailed

information on installing the wall mount refer to the instructions provided by the wall mount manufacturer. It

is strongly recommended to contact a technician for professional assistance for wall mount installation

Polaroid is not responsible for any damage to the product or injury to yourself or others resulting from the

wall0mounting.

Dimension for Mounting Hole Pattern

400mm

200mm

This TV is compatible with a 400mm x 200 mm mounting hole pattern.

4 pcs screws are required for installing the wall mount bracket to your TV. Do not use screws that are longer

than 10 mm. Screws that are too long may cause damage to the inside of the TV set.

Do not fasten the screws too tight for this may damage the TV or cause the TV or cause the TV to fall,

resulting in personal injury.

Do not mount your TV at more than 15 degree tilt.

Always use two people to mount the TV to a wall.

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric

shock.

101Last Page

External Devise Connections

You can enjoy picture, sound and a PC monitor by connecting a DVD player, video game system or computer

to the input located on the rear of the LED TV set.

For the cable, use a commercially available audio/video cable.

For more information about external device connections, see the operation manuals of you external

devices.

Make sure that the corresponding cables are connected to each input. Connecting other cables may

result in a malfunction..

Component Input ( YPbPr): Picture can be displayed only when a 480i or 480p or greater signal is

received.

111Last Page

Remote Control

1. Button

13. Input

2. Numeric Buttons 14. Return

3. Picture button 15. Display

Button

4. Sound Button 16. Sleep Set

5. Volume + 17. Channel +

6. Mute Button 18. Channel

7. Volume - 19. Menu

8. Exit button 20. Stop

9. OK or Enter button 21. Set Up

10. Numeric buttons

11. Play/Pause Button

12. Eject Button

121Last Page

DVD Remote Control

1. Play/Pause button 11. Stop Button

2. Eject Button 12. Setup Button

3. Fast Reverse 13. Next Chapter

4. Fast Forward 14. Previous Chapter

5. Language Button

15. Slow

6. Zoom 16. Subtitle

7. Menu 17. GOTO

8. Angle 18. Title

9. Program 19. A-B

10. Intro 20. Repeat

131Last Page

Remote Control

Inserting Remote Control Batteries

On the Back of the remote, control, push down the catch on the battery compartment cover and lift to

remove it.

Insert the two AA batteries supplied, ensuring that you follow the polarity diagram inside the battery

compartment.

Remit the cover.

Battery Disposal

Please ensure batteries are disposed safely. Never dispose batteries in a fire or with house hold waste. Check

with your local authority for disposal regulations.

The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine,

fires or the like.

Caution

Do not attempt to recharge, short-circuit, disassemble heat or throw the batteries into the fire.

Placing with wrong or mixed polarities batteries will result in damage to the batteries and/or may

result in a malfunction of the unit.

Do not mix old and new batteries.

Dispose of batteries properly in accordance with local law.

Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.

141Last Page

Using Remote Control

Changing Channels

Press the “CH /” buttons to change higher or lower stored main channels and sub-channels.

Press numeric button “0-9” and”•” button and press number “2” button.

Then hit the “ENTER” button to confirm.

To review the stored Channel

Press “CH-List” button to review the stored channels

To select the favorite Channel

Press “FAVORITE” button to enter to favorite channel list, to select the desired channel press the

“/” button then press the “ENTER” button.

To Change to Audio Channel

Press the “AUDIO” button to choose the desired audio channel, if the bilingual language is available

by the broadcasting station.

To Review the station information

Press the “INFO” button to review the station information.

To review the program information

Press the “GUIDE” button to enter the guide menu, and press the “/” button to see next page if

the contents of information is more than one page.

To change the screen aspect ratio

Press the “ZOOM” button to change the aspect ratio of picture size.

To return to the previous channel viewed

Press the “SWAP” button to review the previous channel.

To turn on or turn off the close captioning

Press the “CCD” button to turn ON or turn OFF close caption function.

To Change the picture effect

Press the “PP” button to select the picture effect.

There are four modes for picture with different effect.

User (The picture brightness/contrast/color/sharpness is preset by user)

Standard (Fixed mode for normal condition)

Dynamic (Fixed mode for day time with high brightness environment)

Mild (Fixed mode suitable for bedroom without light condition)

To Set the sleep time

Press the “SLEEP” button to select a predetermined time the TV will turn off. The sleep time can be

set to count down from 15 to 240 minutes.

To mute the sound

Press the “MUTE” button to mute the sound, press once again to resume the sound.

To select Input mode

Press the “INPUT” button to select source model.

AUTO POWER OFF

If no signal is continuously detected from the antenna or broadcasting for more than 10 minutes,

the TV will power-off automatically.

151Last Page

Operating Your TV

Once you have connected your TV to an antenna or cable system, plugged the TV in, and put batteries in the

remote, you are ready to use the TV. The first thing you should do is program your TV to memorize all of the

available channels in your area.

Basic Operation

Power on/off

1. Connect to the power supply with the power adaptor

2. To turn on the TV

Press power button on the TV or Remote Control

- To turn off TV

Press Power button on the TV or Remote Control

Input Source select

Press INPUT button on the TV set or remote control to display input source menu, and

use CH+/- on the TV set or / buttons on the remote control to select the input

source, press OK button on the remote control to enter.

Note: Before you select the input source, make sure the connections are prepared.

First Time installation

When you power ON the unit for the first time, the screen will show the initial setup dialog.

Initial setup menu:

Picture

Sound

Channel

Parental

Setup Press OK button

Other

Picture

Submenu (Picture menu for example)

Highlight the PICTURE and press the “ENTER” button to

access to the sub-menu.

Use the / button to select the main menu and press

OK to enter the submenu.

In the submenu use / button to select the function,

press the /button to adjust/setup or press to enter the submenu.

*(Press Menu Button to return to the upper menu

*(Press Exit button to exit the menu display)

Guide-This guide shows the keys (button) on the remote

control for selecting the items in the OSD menu

161Last Page

Operating Your TV

Picture Menu

Description

Picture Settings: Press  button to enter the Picture Settings menu

Picture mode: Select between Dynamic, Standard, Movie, User and Power

Saving.

You may select the picture mode directly by pressing the PICTURE button on

the remote control.

Note: When selecting the “Power Saving” the machine is in energy-saving

status.

Brightness: Adjust brightness of the picture

Contrast: Control the difference between the bright and dark regions of the

screen picture.

Color: Adjust color of the picture.

Tint: Control the fresh tones to make them appear natural.

Sharpness: Set the amount of fine detail on the picture.

Screen Size: Select the display mode of the picture between Wide, Cinema,

Zoom, Normal and Just Scan.

PC Settings: If the Video input signal comes from your PC, you may adjust the vertical position, Horizontal

Position, Clock, and Phase or even perform an Auto adjustment.

Auto Adjust: Press OK button to setup the parameter of the screen

automatically.

Clock: Adjust the pixel clock frequency until the image size is

maximized for the screen.

H/V Position: Adjust the transverse/vertical position of the screen.

Phase: Adjust the phase of the ADC Sampling clock relative to the sync

signal until a stable image is obtained.

Reset: Press OK button to reset the settings.

Color Temp.: Select between Normal, Cool and Warm

171Last Page

Operating Your TV

OSD Menu

1. Advanced Picture Settings: Press  button to enter the Advanced Picture Settings.

Dynamic Contrast: Select the dynamic contrast mode

between Off, Low, Medium and High.

Film Mode: Activate or deactivate the Film Mode.

Noise Reduction: If the broadcast signal receiver is weak

you can select the DNR option to reduce the video noise

level between Off, Low, Medium, High.

MPEG Noise Reduction: Select the MPEG Noise

Reduction option to reduce the picture noise level

between Off, Low, Medium and High.

2. Sound Menu

Description

Sound Settings: Press  to enter the Sound Setting

menu.

Sound Mode: Select your desired picture mode as follows:

Dynamic, Standard, Soft and User.

You may select the sound mode directly by pressing the

SOUND button on the remote control.

Bass: Low frequency intensity

Treble: High frequency intensity

Balance: Left and right stereo audio channels balance.

Surround Mode: Activate or deactivate the Surround

function.

AVL: Activate or deactivate the Auto Volume Limited function.

Analog Sound: Select the Analog Sound mode between Stereo, Mono and SAP.

Digital Sound: Select the Digital Sound Language.

Digital Audio Output: Select the Digital Audio Output mode between PCM, RAW and Off.

181Last Page

Operating Your TV

Equalizer Settings: Press  button to enter the

Equalizer Settings menu.

Use / button to select the mode between

User, Off, Rock, Pop, and Jazz.

You could press button to enter the item and

use the / buttons to adjust.

You could come back to the Mode selecting item

by pressing button.

3. Channel Menu

Description

Channel List: Display the channel list.

Favorite List: Display the favorite channel list.

Channel Settings: Press  button to display the

Channel Settings menu.

Press /// button to select the item and press

OK button to change the settings.

Signal Type: Allows you to select between Air and

Cable.

Auto Channel Search: Press OK to start Auto Channel

Search.

If you select “Cable” as input signal in Antenna item,

you can press  button to search the channels

automatically. The receivable channels will be stored

automatically. When searching channels, press

“MENU” to stop the search.

If you select “Air” as input signal in Antenna item, you can press button to search the channels

automatically. The receivable channels will be stored automatically. When searching channels press

“Menu” to stop. NOTE: It will take a while to auto scan NTSC or ATSC mode, please wait patiently.

191Last Page

Operating your TV

Parental Control

You must enter the password to gain access to the Parental Control menu. The default password is 000. You

may modify the following options:

V-Chip: Press  button to enter V-Chip menu.

Canada V-Chip: Press  button to enter the Canada V-Chip

Movie Rating

The Movie rating (MPAA) is used for original movies rated by the Motion Picture Association of

America (MPAA) as broadcasted on cable TV and not edited for television.

Use / button to select:

Rating Description

G General Audiences. Movie appropriate for all ages

PG Parental Guidance Suggested. May contain material not suitable for younger viewers

PG-13 Contain content that may not be appropriate for viewers under 13

R Restricted. Contains Adult content, no one under 17 without parent.

NC- 17 No one 17 and under admitted

X Adults only

Page is loading ...

Polaroid tdae-03219 User manual

Brand: Polaroid

Model: tdae-03219

Category: Blu-Ray players

Type: User manual

Download PDF

report

Polaroid tdae-03219 User manual

Polaroid tdae-03219 User manual

Other documents