LARSON 77230351 Installation guide

Type
Installation guide

This manual is also suitable for

12
A Special Word about Brisa for Sliding Patio Doors
The Brisa Screen for single sliding patio doors is for use with traditional 6’8” tall sliding patio doors. (Fig. A) This
screen features unique mounting hardware and is specially sized so that the Screen Housing will rest and secure
to the outer doorframe. The doorframe must have a surface to attach the mounting bracket screws. The distance
between these screws is 78 1/2”. (See Fig. C & D) Please see the following images and visit
https://www.larsondoors.com/screens/brisa-retractable-screens to view the installation video and instructions.
79 1/2"
OVERALL
FRAME
HEIGHT
UPPER HOUSING END CAP
ATTACHMENT BRACKET
WITH SCREW
LOWER HOUSING END CAP
ATTACHMENT BRACKET
WITH SCREW
EXTERIOR VIEW
FIG. A
1/2"
FROM
FRAME
OF
DOOR
32-36"
FRAME WIDTH
(WITHOUT
MODIFICATION)
78 1/2"
TO SCREW CENTERS
FIG. B
FIG. C
FIG. D
  • Page 1 1

LARSON 77230351 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI