Highpoint SSD6202 Quick Installation Guide

Type
Quick Installation Guide

This manual is also suitable for

Highpoint SSD6202 is a 4x M.2 port to PCIe 3.0 x8 NVMe RAID controller that lets you connect four M.2 NVMe SSDs to your computer through a single PCIe slot. It supports various RAID modes, including RAID 0, 1, 5, and 10, allowing you to optimize performance and data protection based on your specific needs. With its compact design and solid construction, the SSD6202 is an excellent choice for expanding storage capacity and enhancing the performance of your system.

Highpoint SSD6202 is a 4x M.2 port to PCIe 3.0 x8 NVMe RAID controller that lets you connect four M.2 NVMe SSDs to your computer through a single PCIe slot. It supports various RAID modes, including RAID 0, 1, 5, and 10, allowing you to optimize performance and data protection based on your specific needs. With its compact design and solid construction, the SSD6202 is an excellent choice for expanding storage capacity and enhancing the performance of your system.

1
SSD6204
4x M.2 Port to PCIe 3.0 x8 NVMe RAID Controller
SSD6204
Quick Installation Guide
V1.01
2
System Requirements
PC Requirements
System with a free PCIe 4.0/3.0 x16 or PCIe 4.0/3.0 x8 slot
Windows
Linux
VMware
SSD6204 Kit Content
SSD6204 Controller Card
Quick Installation Guide
3
SSD6204 Hardware
Front View
Heat sink for M.2 SSD’s
PCIe 3.0 x8 Host Interface
4
SSD6204 Hardware Installation:
Step 1. On the rear of the SSD6204, remove the six screws that secure
the unit’s heat sink to the PCB.
After removing the screws, carefully remove the heat sink from
the SSD6204.
Step 2. These 4 screws are used to install the NVMe SSD’s.
5
Step 3. Please remove the screws on the right side of SSD6204.Gently
insert the SSD into the slot.
Step 4. Refasten the screw to secure the SSD.
Step 5. Repeat Steps 3 to 5 to install the remaining SSDs.
The following example shows four M2 NVMe SSD’s installed
into Port 1, 2, 3 & 4;
Note: Make sure the SSD’s are carefully, but securely
installed into each M.2 port. Loose connections can cause
a variety of stability and performance issues, and may
ultimately result in data loss.
6
Step 6. Carefully align the heat sink and refasten the 6 screws that were
removed in step 1 to the rear of the PCB.
Note
Make sure the aluminum cover is properly aligned with the
controller board (PCB), and that it makes full contact with the
thermal pad, before refastening it to the SSD6204. If the cover is
improperly installed, thermal pad will be unable to sufficiently
cool the NVMe SSD’s and controller componentry, which may
result in damage to the SSD’s or controller hardware,
performance loss, unstable I/O, and the loss of data.
7
Resources
We recommend visiting the SSD6200 series webpage for the latest
software and installation guides
Software Download:
https://highpoint-tech.com/USA_new/series-ssd6200-overview.html
Customer Support
If you encounter any problems while utilizing the SSD6204, or have
any questions about this or any other HighPoint Technologies, Inc.
product, feel free to contact our Customer Support Department.
Web Support:
https://www.highpoint-tech.com/websupport/main.php
HighPoint Technologies, Inc. websites:
https://www.highpoint-tech.com
© Copyright 2021 HighPoint Technologies, Inc. All rights reserved.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Highpoint SSD6202 Quick Installation Guide

Type
Quick Installation Guide
This manual is also suitable for

Highpoint SSD6202 is a 4x M.2 port to PCIe 3.0 x8 NVMe RAID controller that lets you connect four M.2 NVMe SSDs to your computer through a single PCIe slot. It supports various RAID modes, including RAID 0, 1, 5, and 10, allowing you to optimize performance and data protection based on your specific needs. With its compact design and solid construction, the SSD6202 is an excellent choice for expanding storage capacity and enhancing the performance of your system.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI