LG SP8YA Owner's manual

Category
Soundbar speakers
Type
Owner's manual
OWNER’S MANUAL
Wi-Fi
SOUND BAR
Please read this manual carefully before operating your set and retain it for future
reference.
Model
SP8YA (SP8YA, SPP8-W)
2101_Rev01
www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved.
2
Sound Bar Quick Guide
Installing and using the Product
a Connect the sound bar to your TV via an optical cable or an HDMI
cable.
HDMI OUT
D
HDMI IN
(ARC)
HDMI IN OPTICAL
OUT
E
C
C
c
c
c
B
A
a
b
a
A Sound bar
B Remote Control Receiver / Status Display
C Rear Speakers / Wireless Receiver (Sold
separately, SPK8-S)
D Wireless Subwoofer - Install it close to the sound
bar.
E External Device - (Blu-ray player, game console,
etc.)
Soundbar Quick Guide
3
b If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the sound bar via an
HDMI cable.
c If you purchased the rear speakers and wireless receiver separately, connect the rear speakers to the wireless
receiver via a speaker cable. When connecting the rear speakers to the wireless receiver, connect the black
striped cable to the negative terminal of each speaker and the remaining cable to the positive terminal of
each speaker.
d Connect to power in the following order: wireless subwoofer [ wireless receiver [ sound bar. Then, turn on
the sound bar. When the connection is automatically established with the sound bar, the LEDs on the wireless
subwoofer and the wireless receiver will light up in green. ([ See “Connecting the Product” on page 6.)
e Using the product with your TV ([ See “Connecting to the TV”
on page 29.)
A Press the Function button repeatedly until “OPT/HDMI ARC” appears on the status display.
B On your TV's settings, set the output speaker to [HDMI ARC], [Optical], or [External Speaker].
C When the TV is properly connected to the product, “OPT”, ARC, or “E-ARC” will appear on the status display
with a sound.
f Connecting the product to your smartphone via Wi-Fi ([ See
“Connecting with a Smartphone via Wi-Fi” on page 15.)
A Connect your smartphone to Wi-Fi.
B Install the LG Wi-Fi Speaker app on Google Play or the App Store.
C Run the LG Wi-Fi Speaker app and follow the instructions.
D The product will connect to your smartphone and you can control the product with LG Wi-Fi Speaker app.
g Connecting the product to your smartphone via Bluetooth ([
See “Connecting via Bluetooth” on page 37.)
A Tap the Settings button on your smartphone and select Bluetooth. Turn on the Bluetooth function. (
Off > On)
B Press the Bluetooth pair button. After a moment, you will see “BT READY” on the status display.
C Find and tap “LG_Speaker_SP8YA_XXXX” or the name you registered on the Google Home app.
D When the product is connected to your smartphone via Bluetooth, you can see the status display change
from “PAIRED[Connected Bluetooth device name[BT”.
4
Manually connecting the sound bar to the wireless subwoofer or wireless
receiver ([ See “Connecting the wireless subwoofer manually”, “Manual
connection” on page 8, 10.)
If you see a red LED on the back of the wireless subwoofer or on the front of the wireless receiver, it means
that the sound bar is not connected to the speakers. If this is the case, connect them in the following order.
A Press the Power button on the sound bar to turn it off.
B Press the PAIRING (Pairing) button on the back of the disconnected wireless subwoofer or wireless
receiver. Check if each LED blinks green.
- If you still see a red LED on the back of the wireless subwoofer, press and hold the button on the
back of the subwoofer again.
C Press the Power button on the sound bar to turn it on.
D When the connection is established, you will see a green LED light on the back of the wireless
subwoofer or on the front of the wireless receiver light up in green.
5
Table of Contents
Sound Bar Quick Guide
2 Installing and using the Product
Installation
6 Connecting the Product
15 Connecting with a Smartphone via Wi-Fi
18 Resetting the Product
Exploring the Product
19 Front
21 Back
22 Exploring Remote Control
Connecting to the TV
29 Connecting with an Optical Cable
31 Connecting with an HDMI Cable
33 Connecting via Bluetooth
Connecting to an External Device
34 Connecting with an HDMI Cable
36 Connecting with an Optical Cable
Using the Product as an Audio
System
37 Connecting via Bluetooth
40 Connecting to a USB Storage Device
42 Using the LG Wi-Fi Speaker app
43 Compatible with Google Assistant
44 Works with Apple AirPlay
45 Spotify Connect
46 Works with Alexa
Mounting the Product to a Wall
49 Mounting the Product to a Wall
Safety Precautions
51 Safety and Regulatory
Before Reporting Product
Malfunction
54 Troubleshooting
Appendix
58 Specications
60 Registered Trademarks and Licenses
61 What You Need to Know about Network
Services
61 Open Source Software Notice Information
62 Handling the Product
6
Installation
Connecting the Product
You can enjoy a richer sound by connecting the sound bar to the wireless subwoofer.
Connecting the wireless subwoofer automatically
After completing installation, the wireless subwoofer will automatically be connected to the sound bar. Connect
the sound bar to the subwoofer in the following order.
a Plug the power cable into the wireless subwoofer.
b Plug the power cable connected to the wireless subwoofer into an outlet.
c Plug the power cable into the AC adapter.
d Connect the AC adapter cable to the DC IN (AC adapter input) terminal on the back of the product.
e Plug the power cable connected to the AC adapter into an outlet.
f When the connection is automatically established, you will see the LED on the back of the wireless subwoofer
light up in green.
Note • Make sure to use the provided AC adapter. Using other AC adapters may lead to malfunction
and will forfeit the product warranty.
Installation
7
Checking the connection with the LED on the back of the wireless
subwoofer
You can check the connection status by looking at the LED on the back of the wireless subwoofer.
LED Colour Status
Blinking green Connecting in progress
Green Connected successfully
Red Bad connection, or the subwoofer is in standby
Off Power cable not connected
8
Connecting the wireless subwoofer manually
If you see a red LED on the back of the wireless subwoofer, it means that the sound bar is not connected to the
subwoofer. If this is the case, connect them in the following order.
a Press the Power button on the sound bar to turn it off.
b Press the Pairing button on the back of the wireless subwoofer. Check if the LED on the back of the
subwoofer is blinking green. If you still see a red LED on the wireless subwoofer, press and hold the button on
the back of the subwoofer again.
c Press the Power button on the sound bar to turn it on.
d When the connection is established, you will see the LED light on the back of the wireless subwoofer light up
in green.
Note • Install the sound bar as close to the wireless subwoofer as possible. The closer the distance
between the sound bar and the wireless subwoofer, the better the sound quality.
• Please ensure there are no obstacles between the sound bar and the wireless subwoofer.
• To prevent wireless interference, maintain a distance of at least 1 m between the sound bar
or the wireless subwoofer and any peripheral devices that generate strong electromagnetic
waves (ex. wireless routers, microwave ovens, etc.).
9
Connecting the rear speakers to the wireless receiver (SPK8-S, sold
separately)
Automatic connection
After completing installation, the wireless receiver will automatically be connected to the sound bar. Connect the
sound bar to the wireless receiver in the following order.
a Connect the speaker cables to the corresponding terminals on the rear speakers (left, right).
Connect the black striped cable to the negative terminal and the other cable to the positive terminal.
b Connect the speaker cables on the rear speakers (left, right) to the wireless receiver.
Receiver Terminal Colour Speaker Position
Blue L Left rear
Grey R Right rear
c Plug the wireless receiver power cable into an outlet.
d Press the Power button on the sound bar to turn it on.
e When the connection is automatically established, you will see the LED on the front of the wireless receiver
light up in green.
Note • Please only use the speakers provided with the product. Using other speakers may cause
malfunction.
• Connect the speaker cables to the corresponding terminals. Connect to the positive cable
to the positive terminal and the negative cable to the negative terminal. An incorrectly
connected cable will distort the sound or produce no bass.
10
Checking connection status with the LED colour
You can check the connection status with the LED on the front of the wireless receiver.
LED Colour Status
Blinking green Connecting In progress
Green Connected successfully
Red Bad connection, or the receiver is in standby
Off Power cable not connected
Manual connection
If you see a red LED on the front of the wireless receiver, it means that the sound bar is not connected to the
receiver. If this is the case, connect them in the following order.
a Press the Power button on the sound bar to turn it off.
b Press the PAIRING button on the back of the wireless receiver. Check if the LED on the front of the wireless
receiver is blinking green.
c Press the Power button on the sound bar to turn it on.
d When the connection is established, you will see the LED light on the front of the wireless receiver light up in
green.
Note • Keep the rear speakers at least 30 cm away from the TV or monitor.
• To prevent wireless interference, maintain a distance of at least 1 m between the sound bar
or the wireless receiver and any peripheral devices that generate strong electromagnetic
waves (ex. wireless routers, microwave ovens, etc.).
11
Setting up surround sound
The surround sound function allows you to hear immersive 3D sound produced by multiple audio channels from
the speakers, regardless of the channels in the originally recorded content.
For example, if you listen to music recorded in 2.0 channels with standard sound effects while the wireless rear
speakers are connected, you can hear the following difference.
When the surround sound is off
When the surround sound is on
Note • Speaker positions are as follows.
AFront speakers
BCentre speaker
CTop speakers
DSubwoofer
ERear speakers
12
Turning surround sound on/off
a Press Settings button. The product enters the setting mode and you can see “OFF-AUTO POWER” or
ON-AUTO POWER”.
OFF-AUTO POWER
b While the “OFF-AUTO POWER” or “ON-AUTO POWER” is scrolling in the status display, press Left/
Right button to select the surround sound setting. You can see the status of the surround sound, “OFF-
SURROUND” or “ON-SURROUND”.
OFF-AUTO POWER
OFF-SURROUND
OFF-NIGHT TIME
OFF-TV REMOTE
c While the “OFF-SURROUND” or “ON-SURROUND” is scrolling in the status display, press Up/Down
button to turn on or off the surround sound.
OFF-SURROUND ON-SURROUND
13
Speaker sound based on input channels
Sound Effects Input
Output
Rear speakers not
connected
Rear speakers
connected
AI SOUND PRO
Sound customised
witharticial
intelligence
2.0 channels
5.1 channels or more
STANDARD
You can enjoy
optimised sound.
2.0 channels
5.1 channels or more
MUSIC
Sound enriched
with MERIDIAN
technology
2.0 channels
5.1 channels or more
CINEMA
Cinematic 3D
sound
2.0 channels
5.1 channels or more
CLEAR VOICE
Voice sound clear,
improving the
quality of voice
sound
2.0 channels
5.1 channels or more
14
Sound Effects Input
Output
Rear speakers not
connected
Rear speakers
connected
SPORTS
Realistic sound like
in a stadium
2.0 channels
5.1 channels or more
GAME
Optimised sound
for game
2.0 channels
5.1 channels or more
BASS BLAST
(BASS BLAST+)
Sound with
reinforced bass
2.0 channels
5.1 channels or more
15
Connecting with a Smartphone via Wi-Fi
LG Wi-Fi Speaker app allows you to connect the product to the network and to control the product.
Please check the following rst.
• Do you have a wireless router?
- To connect your smartphone and the product via Wi-Fi, you must have a wireless router.
- Make sure that they are both connected to the same Wi-Fi network.
• Does your smartphone have Bluetooth enabled?
- Enable Bluetooth on your smartphone.
- If Bluetooth is enabled, you can easily connect to Wi-Fi. If Bluetooth is disabled, the product may
not be registered on the LG Wi-Fi Speaker app.
• The LG Wi-Fi Speaker app is available in the versions listed below.
- Android™ OS: Version 5.0 or higher
- iOS OS: Version 10 or higher
16
Installing the app
Install the LG Wi-Fi Speaker app on your smartphone. To install the LG Wi-Fi Speaker app, you can scan the QR
code with a QR code scan app or download on Google Play or the App Store.
Downloading with a QR code
a Scan the QR code below with a QR code scan app.
b You will be directed to a page where you can download the LG Wi-Fi Speaker app. Tap the app to install it.
(Android Phone OS) (iPhone OS)
Downloading on Google Play or App Store
Go to the Google Play or the App Store on your smartphone and search for the LG Wi-Fi Speaker app to
install it.
Android™ Phone iPhone
Note • Settings menu items may vary depending on the smartphone manufacturer and OS.
• Google, Android, Google Play, Google Home and Chromecast built-in are trademarks of
Google LLC.
17
Connecting with a Smartphone via LG Wi-Fi Speaker app
You must connect the product to the smartphone via Wi-Fi on the LG Wi-Fi Speaker app to use network services.
The app installation method differs depending on the smartphone.
a Find and tap the LG Wi-Fi Speaker app installed on your smartphone.
b Follow the instructions on the LG Wi-Fi Speaker app. You will need to agree to the terms of service,
Chromecast guide screen, and location permission settings. Turn on Wi-Fi and Bluetooth.
c Select the product to connect. This product will be indicated as “SoundBar”.
d Select a Wi-Fi network and enter the password.
e After completing product connection on the LG Wi-Fi Speaker app, you will see “CONNECTED” appear on
the status display on the product.
Note • You can register the product on Google Home app. For more information, please visit http://
www.google.com/cast/setup/.
• You can create a speaker group with Google Home app and add up to 4 devices as a speaker
group. Adding too many devices may become inconvenient when listening to music.
• If you want to check or change the registered homes nickname or the product name,
connect to the Google Home app and tap the Device Settings button.
• YoucannotcongureorcontroltheproductwiththeLG ThinQ app.
18
Resetting the Product
If the product is frozen and does not work, or if the network connection is unstable, you will need to reset it. If the
Wi-Fi network has been changed, you will need to reset the product and connect it to your smartphone again.
How to reset
a Press and hold the Wi-Fi button on the top of the product until you hear a sound signal.
b You will see “RESET” appear on the status display, and all wireless network settings on the product will be
cleared.
Note • Once you reset the product, you will also need to reconnect the product to the smartphone
via Wi-Fi on the LG Wi-Fi Speaker app.
How to disconnect the wireless network connection or the wireless
device
Press and hold the Power button for 3 seconds or longer to turn off the product.
19
Exploring the Product
Front
aPower This turns the product on/off.
• If you press and hold the Power button for longer than 3 seconds, Wi-Fi
will disconnect and the product will no longer emit sound. Press the Power
button quickly to maintain the Wi-Fi connection for future use.
Function Press the button repeatedly to select the desired function or input mode.
Status Display Description
WI-FI Connects the product via Wi-Fi
BT Connects the product via Bluetooth
OPT/HDMI ARC Connects the product to a TV that supports an optical
cable, ARC, E-ARC, or LG Sound Sync
HDMI Connects the product to an HDMI input port
USB Connects the product to a USB storage device
Volume This adjusts the speaker volume with levels 0 to 40.
Play/Pause This allows you to pause or play music.
If you are using the LG Wi-Fi Speaker app, or if an external device like a USB
storage device or Bluetooth is connected, this will play or pause the music.
Bluetooth pair It allows you to pair your Bluetooth device such as a smartphone to this product
for three minutes. ([ See “Connecting via Bluetooth” on page 37.)
Wi-Fi It goes to the Wi-Fi function directly.
bBuilt-in
microphone
This uses when operating the AI room calibration on LG Wi-Fi Speaker app.
cRemote Control
Receiver
This receives wireless signals from the remote control.
Exploring the Product
20
dStatus display Options such as input mode and volume are displayed in text.
• If there is no active input for 15 seconds, the status display will automatically
dim. When you press the button, the status display will light up again.
Note • To reduce power consumption, the product will automatically turn off after 15 minutes of no
input signal from an external device.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63

LG SP8YA Owner's manual

Category
Soundbar speakers
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI