LG SP8YA Owner's manual

OWNER’S MANUAL

Wi-Fi

SOUND BAR

Please read this manual carefully before operating your set and retain it for future

reference.

Model

SP8YA (SP8YA, SPP8-W)

2101_Rev01

www.lg.com

2

Sound Bar Quick Guide

Installing and using the Product

a Connect the sound bar to your TV via an optical cable or an HDMI

cable.

HDMI OUT

D

HDMI IN

(ARC)

HDMI IN OPTICAL

OUT

E

C

c

B

A

a

b

a

A Sound bar

B Remote Control Receiver / Status Display

C Rear Speakers / Wireless Receiver (Sold

separately, SPK8-S)

D Wireless Subwoofer - Install it close to the sound

bar.

E External Device - (Blu-ray player, game console,

etc.)

Soundbar Quick Guide

3

b If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the sound bar via an

HDMI cable.

c If you purchased the rear speakers and wireless receiver separately, connect the rear speakers to the wireless

receiver via a speaker cable. When connecting the rear speakers to the wireless receiver, connect the black

striped cable to the negative terminal of each speaker and the remaining cable to the positive terminal of

each speaker.

d Connect to power in the following order: wireless subwoofer [ wireless receiver [ sound bar. Then, turn on

the sound bar. When the connection is automatically established with the sound bar, the LEDs on the wireless

subwoofer and the wireless receiver will light up in green. ([ See “Connecting the Product” on page 6.)

e Using the product with your TV ([ See “Connecting to the TV”

on page 29.)

A Press the Function button repeatedly until “OPT/HDMI ARC” appears on the status display.

B On your TV's settings, set the output speaker to [HDMI ARC], [Optical], or [External Speaker].

C When the TV is properly connected to the product, “OPT”, “ ARC”, or “E-ARC” will appear on the status display

with a sound.

f Connecting the product to your smartphone via Wi-Fi ([ See

“Connecting with a Smartphone via Wi-Fi” on page 15.)

A Connect your smartphone to Wi-Fi.

B Install the LG Wi-Fi Speaker app on Google Play or the App Store.

C Run the LG Wi-Fi Speaker app and follow the instructions.

D The product will connect to your smartphone and you can control the product with LG Wi-Fi Speaker app.

g Connecting the product to your smartphone via Bluetooth ([

See “Connecting via Bluetooth” on page 37.)

A Tap the Settings button on your smartphone and select Bluetooth. Turn on the Bluetooth function. (

Off > On)

B Press the Bluetooth pair button. After a moment, you will see “BT READY” on the status display.

C Find and tap “LG_Speaker_SP8YA_XXXX” or the name you registered on the Google Home app.

D When the product is connected to your smartphone via Bluetooth, you can see the status display change

from “PAIRED” [ “Connected Bluetooth device name” [ “BT”.

4

Manually connecting the sound bar to the wireless subwoofer or wireless

receiver ([ See “Connecting the wireless subwoofer manually”, “Manual

connection” on page 8, 10.)

If you see a red LED on the back of the wireless subwoofer or on the front of the wireless receiver, it means

that the sound bar is not connected to the speakers. If this is the case, connect them in the following order.

A Press the Power button on the sound bar to turn it off.

B Press the PAIRING (Pairing) button on the back of the disconnected wireless subwoofer or wireless

receiver. Check if each LED blinks green.

- If you still see a red LED on the back of the wireless subwoofer, press and hold the button on the

back of the subwoofer again.

C Press the Power button on the sound bar to turn it on.

D When the connection is established, you will see a green LED light on the back of the wireless

subwoofer or on the front of the wireless receiver light up in green.

5

Table of Contents

Sound Bar Quick Guide

2 Installing and using the Product

Installation

6 Connecting the Product

15 Connecting with a Smartphone via Wi-Fi

18 Resetting the Product

Exploring the Product

19 Front

21 Back

22 Exploring Remote Control

Connecting to the TV

29 Connecting with an Optical Cable

31 Connecting with an HDMI Cable

33 Connecting via Bluetooth

Connecting to an External Device

34 Connecting with an HDMI Cable

36 Connecting with an Optical Cable

Using the Product as an Audio

System

37 Connecting via Bluetooth

40 Connecting to a USB Storage Device

42 Using the LG Wi-Fi Speaker app

43 Compatible with Google Assistant

44 Works with Apple AirPlay

45 Spotify Connect

46 Works with Alexa

Mounting the Product to a Wall

49 Mounting the Product to a Wall

Safety Precautions

51 Safety and Regulatory

Before Reporting Product

Malfunction

54 Troubleshooting

Appendix

58 Specications

60 Registered Trademarks and Licenses

61 What You Need to Know about Network

Services

61 Open Source Software Notice Information

62 Handling the Product

6

Installation

Connecting the Product

You can enjoy a richer sound by connecting the sound bar to the wireless subwoofer.

Connecting the wireless subwoofer automatically

After completing installation, the wireless subwoofer will automatically be connected to the sound bar. Connect

the sound bar to the subwoofer in the following order.

a Plug the power cable into the wireless subwoofer.

b Plug the power cable connected to the wireless subwoofer into an outlet.

c Plug the power cable into the AC adapter.

d Connect the AC adapter cable to the DC IN (AC adapter input) terminal on the back of the product.

e Plug the power cable connected to the AC adapter into an outlet.

f When the connection is automatically established, you will see the LED on the back of the wireless subwoofer

light up in green.

Note • Make sure to use the provided AC adapter. Using other AC adapters may lead to malfunction

and will forfeit the product warranty.

Installation

7

Checking the connection with the LED on the back of the wireless

subwoofer

You can check the connection status by looking at the LED on the back of the wireless subwoofer.

LED Colour Status

Blinking green Connecting in progress

Green Connected successfully

Red Bad connection, or the subwoofer is in standby

Off Power cable not connected

8

Connecting the wireless subwoofer manually

If you see a red LED on the back of the wireless subwoofer, it means that the sound bar is not connected to the

subwoofer. If this is the case, connect them in the following order.

a Press the Power button on the sound bar to turn it off.

b Press the Pairing button on the back of the wireless subwoofer. Check if the LED on the back of the

subwoofer is blinking green. If you still see a red LED on the wireless subwoofer, press and hold the button on

the back of the subwoofer again.

c Press the Power button on the sound bar to turn it on.

d When the connection is established, you will see the LED light on the back of the wireless subwoofer light up

in green.

Note • Install the sound bar as close to the wireless subwoofer as possible. The closer the distance

between the sound bar and the wireless subwoofer, the better the sound quality.

• Please ensure there are no obstacles between the sound bar and the wireless subwoofer.

• To prevent wireless interference, maintain a distance of at least 1 m between the sound bar

or the wireless subwoofer and any peripheral devices that generate strong electromagnetic

waves (ex. wireless routers, microwave ovens, etc.).

9

Connecting the rear speakers to the wireless receiver (SPK8-S, sold

separately)

Automatic connection

After completing installation, the wireless receiver will automatically be connected to the sound bar. Connect the

sound bar to the wireless receiver in the following order.

a Connect the speaker cables to the corresponding terminals on the rear speakers (left, right).

Connect the black striped cable to the negative terminal and the other cable to the positive terminal.

b Connect the speaker cables on the rear speakers (left, right) to the wireless receiver.

Receiver Terminal Colour Speaker Position

Blue L Left rear

Grey R Right rear

c Plug the wireless receiver power cable into an outlet.

d Press the Power button on the sound bar to turn it on.

e When the connection is automatically established, you will see the LED on the front of the wireless receiver

light up in green.

Note • Please only use the speakers provided with the product. Using other speakers may cause

malfunction.

• Connect the speaker cables to the corresponding terminals. Connect to the positive cable

to the positive terminal and the negative cable to the negative terminal. An incorrectly

connected cable will distort the sound or produce no bass.

10

Checking connection status with the LED colour

You can check the connection status with the LED on the front of the wireless receiver.

LED Colour Status

Blinking green Connecting In progress

Green Connected successfully

Red Bad connection, or the receiver is in standby

Off Power cable not connected

Manual connection

If you see a red LED on the front of the wireless receiver, it means that the sound bar is not connected to the

receiver. If this is the case, connect them in the following order.

a Press the Power button on the sound bar to turn it off.

b Press the PAIRING button on the back of the wireless receiver. Check if the LED on the front of the wireless

receiver is blinking green.

c Press the Power button on the sound bar to turn it on.

d When the connection is established, you will see the LED light on the front of the wireless receiver light up in

green.

Note • Keep the rear speakers at least 30 cm away from the TV or monitor.

• To prevent wireless interference, maintain a distance of at least 1 m between the sound bar

or the wireless receiver and any peripheral devices that generate strong electromagnetic

waves (ex. wireless routers, microwave ovens, etc.).

11

Setting up surround sound

The surround sound function allows you to hear immersive 3D sound produced by multiple audio channels from

the speakers, regardless of the channels in the originally recorded content.

For example, if you listen to music recorded in 2.0 channels with standard sound effects while the wireless rear

speakers are connected, you can hear the following difference.

When the surround sound is off

When the surround sound is on

Note • Speaker positions are as follows.

AFront speakers

BCentre speaker

CTop speakers

DSubwoofer

ERear speakers

12

Turning surround sound on/off

a Press Settings button. The product enters the setting mode and you can see “OFF-AUTO POWER” or

“ON-AUTO POWER”.

OFF-AUTO POWER

b While the “OFF-AUTO POWER” or “ON-AUTO POWER” is scrolling in the status display, press Left/

Right button to select the surround sound setting. You can see the status of the surround sound, “OFF-

SURROUND” or “ON-SURROUND”.

OFF-AUTO POWER

OFF-SURROUND

OFF-NIGHT TIME

OFF-TV REMOTE

c While the “OFF-SURROUND” or “ON-SURROUND” is scrolling in the status display, press Up/Down

button to turn on or off the surround sound.

OFF-SURROUND ON-SURROUND

13

Speaker sound based on input channels

Sound Effects Input

Output

Rear speakers not

connected

Rear speakers

connected

AI SOUND PRO

Sound customised

witharticial

intelligence

2.0 channels

5.1 channels or more

STANDARD

You can enjoy

optimised sound.

2.0 channels

5.1 channels or more

MUSIC

Sound enriched

with MERIDIAN

technology

2.0 channels

5.1 channels or more

CINEMA

Cinematic 3D

sound

2.0 channels

5.1 channels or more

CLEAR VOICE

Voice sound clear,

improving the

quality of voice

sound

2.0 channels

5.1 channels or more

14

Sound Effects Input

Output

Rear speakers not

connected

Rear speakers

connected

SPORTS

Realistic sound like

in a stadium

2.0 channels

5.1 channels or more

GAME

Optimised sound

for game

2.0 channels

5.1 channels or more

BASS BLAST

(BASS BLAST+)

Sound with

reinforced bass

2.0 channels

5.1 channels or more

15

Connecting with a Smartphone via Wi-Fi

LG Wi-Fi Speaker app allows you to connect the product to the network and to control the product.

Please check the following rst.

• Do you have a wireless router?

- To connect your smartphone and the product via Wi-Fi, you must have a wireless router.

- Make sure that they are both connected to the same Wi-Fi network.

• Does your smartphone have Bluetooth enabled?

- Enable Bluetooth on your smartphone.

- If Bluetooth is enabled, you can easily connect to Wi-Fi. If Bluetooth is disabled, the product may

not be registered on the LG Wi-Fi Speaker app.

• The LG Wi-Fi Speaker app is available in the versions listed below.

- Android™ OS: Version 5.0 or higher

- iOS OS: Version 10 or higher

16

Installing the app

Install the LG Wi-Fi Speaker app on your smartphone. To install the LG Wi-Fi Speaker app, you can scan the QR

code with a QR code scan app or download on Google Play or the App Store.

Downloading with a QR code

a Scan the QR code below with a QR code scan app.

b You will be directed to a page where you can download the LG Wi-Fi Speaker app. Tap the app to install it.

(Android Phone OS) (iPhone OS)

Downloading on Google Play or App Store

Go to the Google Play or the App Store on your smartphone and search for the LG Wi-Fi Speaker app to

install it.

Android™ Phone iPhone

Note • Settings menu items may vary depending on the smartphone manufacturer and OS.

• Google, Android, Google Play, Google Home and Chromecast built-in are trademarks of

Google LLC.

17

Connecting with a Smartphone via LG Wi-Fi Speaker app

You must connect the product to the smartphone via Wi-Fi on the LG Wi-Fi Speaker app to use network services.

The app installation method differs depending on the smartphone.

a Find and tap the LG Wi-Fi Speaker app installed on your smartphone.

b Follow the instructions on the LG Wi-Fi Speaker app. You will need to agree to the terms of service,

Chromecast guide screen, and location permission settings. Turn on Wi-Fi and Bluetooth.

c Select the product to connect. This product will be indicated as “SoundBar”.

d Select a Wi-Fi network and enter the password.

e After completing product connection on the LG Wi-Fi Speaker app, you will see “CONNECTED” appear on

the status display on the product.

Note • You can register the product on Google Home app. For more information, please visit http://

www.google.com/cast/setup/.

• You can create a speaker group with Google Home app and add up to 4 devices as a speaker

group. Adding too many devices may become inconvenient when listening to music.

• If you want to check or change the registered home’s nickname or the product name,

connect to the Google Home app and tap the Device Settings button.

• YoucannotcongureorcontroltheproductwiththeLG ThinQ app.

18

Resetting the Product

If the product is frozen and does not work, or if the network connection is unstable, you will need to reset it. If the

Wi-Fi network has been changed, you will need to reset the product and connect it to your smartphone again.

How to reset

a Press and hold the Wi-Fi button on the top of the product until you hear a sound signal.

b You will see “RESET” appear on the status display, and all wireless network settings on the product will be

cleared.

Note • Once you reset the product, you will also need to reconnect the product to the smartphone

via Wi-Fi on the LG Wi-Fi Speaker app.

How to disconnect the wireless network connection or the wireless

device

Press and hold the Power button for 3 seconds or longer to turn off the product.

19

Exploring the Product

Front

aPower This turns the product on/off.

• If you press and hold the Power button for longer than 3 seconds, Wi-Fi

will disconnect and the product will no longer emit sound. Press the Power

button quickly to maintain the Wi-Fi connection for future use.

Function Press the button repeatedly to select the desired function or input mode.

Status Display Description

WI-FI Connects the product via Wi-Fi

BT Connects the product via Bluetooth

OPT/HDMI ARC Connects the product to a TV that supports an optical

cable, ARC, E-ARC, or LG Sound Sync

HDMI Connects the product to an HDMI input port

USB Connects the product to a USB storage device

Volume This adjusts the speaker volume with levels 0 to 40.

Play/Pause This allows you to pause or play music.

If you are using the LG Wi-Fi Speaker app, or if an external device like a USB

storage device or Bluetooth is connected, this will play or pause the music.

Bluetooth pair It allows you to pair your Bluetooth device such as a smartphone to this product

for three minutes. ([ See “Connecting via Bluetooth” on page 37.)

Wi-Fi It goes to the Wi-Fi function directly.

bBuilt-in

microphone

This uses when operating the AI room calibration on LG Wi-Fi Speaker app.

cRemote Control

Receiver

This receives wireless signals from the remote control.

Exploring the Product

20

dStatus display Options such as input mode and volume are displayed in text.

• If there is no active input for 15 seconds, the status display will automatically

dim. When you press the button, the status display will light up again.

Note • To reduce power consumption, the product will automatically turn off after 15 minutes of no

input signal from an external device.

Page is loading ...

LG SP8YA Owner's manual

LG SP8YA Owner's manual

Related papers

Other documents