534090

Electrolux 534090 User manual

  • Hello! I am an AI chatbot trained to assist you with the Electrolux 534090 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Approval: ___________________________________________
534090 (WT66BL208) 66 Conveyor Dishwasher with
Built in Booster. Left to Right - 208V
534091 (WT66BR208) 66 Conveyor Dishwasher with
Built in Booster. Right to Left - 208V
534092 (WT66BL240) 66 Conveyor Dishwasher with
Built in Booster. Left to Right - 240V
534093 (WT66BR240) 66 Conveyor Dishwasher with
Built in Booster. Right to Left - 240V
Item No. ___________________________________
Unit to be Electrolux WT66 Hot Water Sanitizing 66 single tank conveyor
dishwasher with built in hot water booster. Electrical characteristics to be
____ 208 V or ____ 240 V three phase operation. Unit to operate from ___
left to right or ____ right to left. Unit to feature atmospheric built in booster
system with built in rinse booster pump thus guaranteeing rinse pressure
during rinse cycle. Hot water booster temperature rise can be selected
during installation from three options, 40 °F rise (140 °F incoming water
temperature), 70 °F rise (110 °F incoming water temperature) or 100 °F
rise (80 °F incoming water temperature). Unit to include 22 pre-wash zone.
Pre-wash zone with powerful 0.5 hp cold water pre wash. Unit to have two
conveyor speeds which can be selected from the control panel by the
operator, 130 racks/hour or 200 racks/hour. Maximum water consumption
at 200 racks/hour of only 83 gal/hour (0.4 gal/rack). Unit to feature large
heat and noise insulated front counter balanced door in pre wash and
wash/rinse sections for easy access of internal components. Powerful 2
HP wash pump and specially designed wash spray arms to guarantee
cleaning. Unit to feature as standard end of day self cleaning cycle. Drain
of water from the machine can be done through the control panel. Large
deep drawn 26 gal wash tank for extended wash sessions.
Covered by Electrolux Platinum Star® Service Program two-year parts
and one-year labor warranty, installation start-up and performance check-
up after one year from installation.
Short Form Specification
Electrolux Professional, Inc.
www.electroluxusa.com/professional
3225 SW 42nd Street, Fort Lauderdale, Florida, 33312 • Telephone Number: 866-449-4200 • Fax Number: 954-327-6789
ITEM # _______________________________________________
MODEL # _____________________________________________
PROJECT NAME #______________________________________
SIS # _________________________________________________
AIA # _________________________________________________
Warewashing
66 Single Tank Conveyor Dishwasher
with Built In Hot Water Booster WT66
Main features
Built in hot water booster (top mounted in wash/rinse section).
Water booster temperature rise can be set on site during the installation of the
machine. 40 °F rise (140 °F incoming water temperature), 70 °F rise (110 °F
incoming water temperature) or
100 °F rise (80 °F incoming water temperature).
Atmospheric booster system with air break.
Built in rinse booster pump guarantees constant rinse pressure.
Speed of conveyor can be set through the control panel by the operator.
130 racks/hr or 200 racks/hr.
Large counter balanced inspection doors in pre wash and wash/rinse sections
allow unrestricted all round access to the wash and rinse area. Door is insulated
with injected foam. This adds strength as well as reduces noise and heat loss.
Large filters sloping towards the front to the smaller pressed filter box for quick
removal. Filters feature holes smaller than the concave ant-block wash nozzles so
large food cannot enter and block the wash system. Filters easy to remove from
pre wash as well as wash/rinse sections.
Adjustable feet for full access underneath the machine for cleaning.
Push button self cleaning cycle of the wash and rinse zones for ease of “end of
day” cleaning.
Wash chamber without internal pipes and therefore no hidden dirt traps.
Pre wash chamber without internal pipes and therefore no hidden
dirt traps.
Self draining wash pumps provide maximum hygiene with no smells and all
wash and rinse zones drain automatically at the push of a button.
Powerful 0.5 HP pre-wash pump.
Powerful 2 HP wash pump.
Heavy duty stainless steel wash pump (impeller and housing).
Pre wash section uses cold water so food remains are not “baked” onto the
plates.
Deep drawn pressed 26 gal wash tank with fully rounded corners, sloped
towards the drain to prevent dirt build up provides fast drainage in only a few
minutes. Pressed wash tank with no welded points offer a guaranteed water
tight solution.
Deep drawn pressed 11.8 gal pre wash tank with fully rounded corners.
Dishwasher structure is held together with a solid 2 × 2 stainless steel tube
sub-frame to provide long term sturdiness.
All main components made in heavy duty anti-corrosive 304 type stainless steel:
tanks, panels, pre wash, wash & rinse arms and caps, doors, front, handle, rear
and side-panels and rack transportation system.
Pre wash, wash and rinse arms can be easily removed for cleaning.
IPX5 (NEMA4) water protection ensures no damage from cleaning.
Autostart/stop ensures that the machine runs only when a rack is passing
through it. This reduces both water and energy consumption.
Internal curtains made of silastic material and are not affected by detergent or
heat.
Electronic control panel features large display for reading of wash and rinse
temperatures.
Low water consumption. At 200 racks per hour, the machine uses only
83 gal/hr (0.4 gal/rack).
Machine predisposed for external detergent and rinse aid connections.
Included Accessories
Vent cowls (left and right side).
One open sided dishwasher rack for trays.
Rack for cups.
Rack for dinner plates.
Warewashing
66 Single Tank Conveyor Dishwasher with Built In Hot Water Booster WT66
Warewashing
66 Single Tank Conveyor Dishwasher
with Built In Hot Water Booster WT66
3048424
Electric
Key Information
Water
Warewashing
66 Single Tank Conveyor Dishwasher
with Built In Hot Water Booster WT66
Inlet Water supply pressure: 22 – 102 psi (150 – 700 kPa)
Inlet Cold Water Supply Temperature
for pre wash section: 39-59 °F (4-15 °C)
Inlet Hot Water Supply Temperature for wash/rinse section
(booster size can be set on site during installation):
140 °F (60 °C)
with booster set as 40 °F rise.
110 °F (44 °C)
with booster set as 70 °F rise.
80 °F (27 °C)
with booster set as 100 °F rise.
Inlet Water supply hardness: 4 - 8 gpg (7-14 °fH) max
Incoming Cold Water line size
(pre wash): G 3/4
Incoming Hot Water line size
(wash/rinse section): G 3/4
Drain line size (pre wash section): G 1-1/2
Drain line size (wash/rinse section): G 1-1/2
Water consumption: Gallons/hr: 83.2 gal/hr (315 liters)
Water consumption/rack: 0.4 gal/rack (1.5 l/rack)
Pre wash temperature: < 105 °F (<40 °C)
Pre wash tank size: 11.8 gal (45 liters)
Pre wash pump power: 0.5 hp (0,37 kW)
Pre wash pump water flow: 39 gal/min (150 l/min)
Wash temperature: 160 – 172 °F (71-78 °C)
Wash tank size: 26 gal (100 liters)
Wash pump power: 2 hp (1.5kW)
Wash pump water flow: 118.9 gal/min (450 l/min)
Rinse temperature: 180 – 194 °F (82-90 °C)
Rinse pump power: 0.4 hp (0.32 kW)
Rinse pump water flow: 1.32 gal/min (5 l/min)
Hot water booster capacity: 6.2 gal (24 liters)
Initial fill Hot Water requirements: 32.2 gal (124 liters)
Initial fill Cold Water requirements: 11.8 gal (45 liters)
Productivity racks per hour 200 racks / 3600 dishes
(max speed): (average 18 dishes per rack)
Productivity racks per hour 130 racks / 2340 dishes
(min speed): (average 18 dishes per rack)
Table to Table connection: 66 (
1676 mm)
Number of Tanks: 1
Height with door open: 83-7/16 (2119 mm)
Charging hole size (width): 20-7/8 (530 mm)
Charging hole size (height): 19-3/4 (501 mm)
Net weight: 1012 lb (459 kg)
Shipping weight: 1210 lb (549 kg)
Shipping width: 74-7/16 (1890 mm)
Shipping depth: 40-15/16 (1040 mm)
Shipping height: 81-1/8 (2060 mm)
Shipping volume: 143 cu.ft (4.05 m
3
)
Noise level: <70 dBA
Unit predisposed to accept external detergent dispensers, detergent
probes and rinse aid dispensers.
Exhaust Requirements
Unit supplied as standard with extended vent hoods
(can be removed during installation if not required).
Exhaust extraction not more than 160 CFM
Refer to installation diagram for minimum exhaust hood
installation height .
Supply voltage: 534090 208V/3ph/60Hz
534091 208V/3ph/60Hz
534092 240V/3ph/60Hz
534093 240V/3ph/60Hz
Dishwasher has three selectable hot water booster configurations
according to inlet water supply temperature.
Dishwasher requires two separate electrical service connections.
Connection 1 for Hot Water Booster; Connection 2 for running of the
machine (wash pump, tank heat, conveyor drive motor, rinse booster
pump, electronic control). Refer to the information below for Amp
requirements.
Booster 40 °F rise Electrical Characteristics
Hot Water Booster Amp Load Connection 1:
208 V/3p/60Hz 33.35A (12 kW)
240 V/3p/60Hz 28.9A (12 kW)
Wash Pump, Tank heat Amp Load Connection 2:
208 V/3p/60Hz 64A (21 kW)
240 V/3p/60Hz 57.5A (21 kW)
Total Amp Load: 208 V/3p/60Hz 97.4A (33 kW)
240 V/3p/60Hz 86.4A (33 kW)
Booster 70 °F rise Electrical Characteristics
Hot Water Booster Amp Load Connection 1:
208 V/3p/60Hz 50A (18 kW)
240 V/3p/60Hz 43.3A (18 kW)
Wash Pump, Tank heat Amp Load Connection 2:
208 V/3p/60Hz 64A (21 kW)
240 V/3p/60Hz 57.5A (21 kW)
Total Amp Load: 208 V/3p/60Hz 114A (39 kW)
240 V/3p/60Hz 100.8A (39 kW)
Booster 100 °F rise Electrical Characteristics
Hot Water Booster Amp Load Connection 1:
208 V/3p/60Hz 66.6A (24 kW)
240 V/3p/60Hz 57.7A (24 kW)
Wash Pump, Tank heat Amp Load Connection 2:
208 V/3p/60Hz 64A (21 kW)
240 V/3p/60Hz 57.5A (21 kW)
Total Amp Load: 208 V/3p/60Hz 130.6A (45 kW)
240 V/3p/60Hz 115.2A (45 kW)
Min 400 mm
Min 15.75
204 mm
8.06
102 mm
4.00
177 mm
7.00
566 mm
22.25
623 mm
24.50
698 mm
27.50
200 mm
7.88
1037 mm
40.81
764 mm
30.06
1121 mm
44.13
D
DE
DE1
= Water drain
= Detergent Dispenser
Connection
= Detergent Probe
EC1
EC2
CW
HW
= Electrical connection 1
= Electrical connection 2
= Cold Water Inlet
= Hot Water Inlet
DE1
174 mm
6.81
562 mm
22.13
60 mm
2.38
50 mm
1.94
116 mm
4.56
209 mm
8.19
406 mm
16.00
592 mm
23.31
87 mm
3.44
39 mm
1.50
560 mm
22.06
39 mm
1.50
324 mm
12.75
2119 mm
83.44
1699 mm
66.88
1447 mm
57.00
340 mm
13.38
79 mm
3.13
633 mm
24.94
172 mm
6.75
190 mm
7.50
396 mm
15.56
807 mm
31.75
884 mm
34.81
DE DE
DE
D
D
HW
DE1
DE
EC1
EC2
EC1
EC2
D
CW
HW
44 mm
1.75
559 mm
22.0
1137 mm
44.75
1479 mm
58.19
1683 mm
66.25
44 mm
1.75
72 mm
2.81
196 mm
7.75
CW
Min 400 mm
Min 15.75
204 mm
8.06
102 mm
4.00
177 mm
7.00
566 mm
22.25
623 mm
24.50
698 mm
27.50
200 mm
7.88
1037 mm
40.81
562 mm
22.13
578 mm
22.75
205 mm
8.06
D
DE
DE1
= Water drain
= Detergent Dispenser
Connection
= Detergent Probe
EC1
EC2
CW
HW
= Electrical connection 1
= Electrical connection 2
= Cold Water Inlet
= Hot Water Inlet
DE1
174 mm
6.81
562 mm
22.13
60 mm
2.38
50 mm
1.94
116 mm
4.56
209 mm
8.19
406 mm
16.00
592 mm
23.31
87 mm
3.44
39 mm
1.50
560 mm
22.06
39 mm
1.50
324 mm
12.75
2119 mm
83.44
1699 mm
66.88
1447 mm
57.00
340 mm
13.38
79 mm
3.13
633 mm
24.94
172 mm
6.75
190 mm
7.50
396 mm
15.56
807 mm
31.75
884 mm
34.81
DE DE
DE
D
D
HW
DE1
DE
EC1
EC2
EC1
EC2
D
CW
HW
44 mm
1.75
369 mm
14.50
493 mm
19.44
559 mm
22.0
920 mm
36.19
1052 mm
41.38
1683 mm
66.25
44 mm
1.75
CW
Front View
Top View
Warewashing
66 Single Tank Conveyor Dishwasher
with
Built In Hot Water Booster WT66
Front View
Top View
Side View
534090 & 534092
Left to Right
534091 & 534093
Right to Left
Side View
12-27-06
Recommended Table Connection and Fabrication
Warewashing
66 Single Tank Conveyor Dishwasher
with Built In Hot Water Booster WT66
The company reserves the right to make modifications to the products without prior notice.
All information correct at time of printing.
Warewashing
66
Single Tank Conveyor Dishwasher
with Built In Hot Water Booster WT66
1.50
38 mm
2.25
57 mm
1.75
45 mm
45 mm
45 mm
20.75
527 mm
INSIDE TANK
540 mm
OPENING
0.75
19 mm
8.00
203 mm
0.88
23 mm
2 HOLES
FOR BOLTING
TABLE TO TANK
CENTER LINE
MACHINE
FRONT OF
MACHINE
HOLE LOCATIONS IN TURNED DOWN
PORTION OF TABLE
21.25
1.75 1.75
AWG
2
0
.7
5
/5
2
7
m
m
IN
S
ID
E
T
A
N
K
2
1
.0
0
/5
3
3
m
m
O
P
E
N
IN
G
1.75
45 mm
2.25
57 mm
AWG
8.00
203 mm
1.50
38 mm
8.25
210 mm
1.50
38 mm
0.63
16 mm
TRACK AND TABLE MUST
BE AT SAME LEVEL
USE SEALANT BETWEEN TABLE AND LIP
OF TANK TO PREVENT WATER LEAKAGE
SECTIONAL VIEW SHOWING
TABLE CONNECTIONS
27.75
705 mm
21.25
540 mm
10.63
270 mm
8.25
210 mm
0.25
7 mm
CENTER LINE
MACHINE
AVG INSIDE
TABLE WIDTH
OPENING
FRONT OF
MACHINE
0.25
7 mm
82.00
2083 mm
OVERALL
66.00
1676 mm
TABLE TO TABLE
4.00
102 mm
4.00
102 mm
74.00
1880 mm
16.00
406 mm
21.25
540 mm
OPENING
27.75
705 mm
32.06
814 mm
2.00
52 mm
CENTER LINE MACHINE
8.00
204 mm
34.00
865 mm
RACK RAIL
HEIGHT
69.38
1761 mm
OVERALL
7.50
189 mm
20.00
508 mm
SERVICE CLEARANCE
(BOTH SIDES)
82.00
2083 mm
8.00
204 mm
/