In-Sink-Erator CC-202D-1 Datasheet

CC-202D-1
In-Sink-Erator
Brand
In-Sink-Erator
Model
CC-202D-1
Type
Datasheet

This manual is also suitable for

PROJECT: ITEM NO.:
InSinkErator is a division of Emerson Electric Co.
CONTROL CENTER MODEL CC-202
STAINLESS STEEL ENCLOSURE
• NEMA 4
• Waterproof construction
• 18 gallon (68.1 liters) stainless steel
• Easy to clean and keep clean
AUTOMATIC REVERSING CONTROL
• Reverses direction of motor at each startup
• Increases cutting element life and reduces jams
REVERSING DELAY
• Disposer will not reverse while motor is in motion
• Protects motor from burn out from operator misuse
AUTOMATIC DROP OUT SYSTEM
• If a power loss occurs, control will automatically
disengage power lines
• Disposer must be restarted
SPECIFICATIONS
Model Voltage/Hz Phase
CC202D-1 120V, 50/60 Hz 1 Ph
CC202D-2 208-240V, 50/60 Hz 1 Ph
CC202D-3 208-240V, 50/60 Hz 3 Ph
CC202D-4 380-460V, 50/60 Hz 3 Ph
VOLTAGE/PHASE AVAILABILITY
6"
(152.4 mm)
8"
(203.2 mm)
5-1/4"
(133.4 mm)
5-7/8"
(149.2 mm)
10-3/4"
(273.1 mm)
10"
(254.0 mm)
DIMENSIONS
RECOMMENDED INSTALLATION
InSinkErator ©2011 Printed in USA Form No. F194-11A-45-02
AUTOMATIC REVERSING ACTION • DOUBLES THE LIFE OF DISPOSER GRINDING ELEMENTS
NOTE: The CC-202 control center should be mounted 1-1/2"
(38.1 mm) back from the front surface of the table.
The Emerson logo is a
trademark and a service mark
of Emerson Electric Co.
Our products appear on The KCL CADalog
CD-ROM based CAD Foodservice Symbol
Library. More information is available from
Kochman Consultants, Ltd. at www.kclcad.com.
4700 21st STREET
RACINE, WI 53406
TEL: 800-845-8345
FAX: 262 554-3620
www.insinkerator.com/foodservice
  • Page 1 1

In-Sink-Erator CC-202D-1 Datasheet

CC-202D-1
In-Sink-Erator
Brand
In-Sink-Erator
Model
CC-202D-1
Type
Datasheet
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents