Dell PowerEdge FX2/FX2s Owner's manual

Type
Owner's manual

This manual is also suitable for

Dell PowerEdge FC630
Owner's Manual
Regulatory Model: E02B
Regulatory Type: E02B004
Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better use of your computer.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
© 2016 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws. Dell
and the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein
may be trademarks of their respective companies.
2016 - 03
Rev. A01
1 Dell PowerEdge FC630 overview ................................................................................................... 7
Supported configurations for the PowerEdge FC630 system........................................................................................ 7
Front panel..............................................................................................................................................................................8
2.5-inch hard drive or SSD system................................................................................................................................9
1.8-inch SSD system...................................................................................................................................................... 10
Diagnostic Indicators............................................................................................................................................................ 11
iDRAC Direct LED indicator codes................................................................................................................................11
Using USB diskette or USB DVD or CD drives............................................................................................................11
Hard drive or SSD indicator patterns...........................................................................................................................12
Locating Service Tag of your system................................................................................................................................ 13
2 Documentation resources............................................................................................................ 14
3 Technical specifications.............................................................................................................. 16
Chassis dimensions.............................................................................................................................................................. 16
Chassis weight......................................................................................................................................................................16
Processor specifications......................................................................................................................................................16
System battery specifications ........................................................................................................................................... 17
Memory specifications ........................................................................................................................................................17
RAID controllers....................................................................................................................................................................17
PCIe mezzanine card slots.................................................................................................................................................. 17
Driver specification...............................................................................................................................................................17
Hard drives...................................................................................................................................................................... 17
SSDs.................................................................................................................................................................................17
Optical drive.................................................................................................................................................................... 17
Flash drive....................................................................................................................................................................... 18
Ports and connectors specifications ................................................................................................................................ 18
USB ports........................................................................................................................................................................18
Internal Dual SD Module ...............................................................................................................................................18
Video specifications ............................................................................................................................................................ 18
Environmental specifications ............................................................................................................................................. 18
Particulate and gaseous contamination specifications .............................................................................................19
Expanded operating temperature ...............................................................................................................................20
Expanded operating temperature restrictions............................................................................................................21
4 Initial system setup and configuration.......................................................................................... 22
Setting up your system.......................................................................................................................................................22
iDRAC configuration............................................................................................................................................................22
Options to set up iDRAC IP address........................................................................................................................... 22
Options to install the operating system............................................................................................................................23
Methods to download firmware and drivers.............................................................................................................. 23
5 Pre-operating system management applications........................................................................... 25
Options to manage the pre-operating system applications...........................................................................................25
Contents
Contents 3
System Setup.......................................................................................................................................................................25
Viewing System Setup..................................................................................................................................................25
System Setup details.....................................................................................................................................................26
System BIOS.................................................................................................................................................................. 26
iDRAC Settings utility....................................................................................................................................................46
Device Settings.............................................................................................................................................................. 47
Dell Lifecycle Controller...................................................................................................................................................... 47
Embedded system management................................................................................................................................. 47
Boot Manager...................................................................................................................................................................... 47
Viewing Boot Manager..................................................................................................................................................47
Boot Manager main menu............................................................................................................................................ 48
PXE boot.............................................................................................................................................................................. 48
6 Installing and removing sled components..................................................................................... 49
Safety instructions.............................................................................................................................................................. 49
Before working inside your system............................................................................................................................. 49
After working inside your system................................................................................................................................50
Recommended tools........................................................................................................................................................... 50
Sled....................................................................................................................................................................................... 50
Removing the sled.........................................................................................................................................................50
Installing the sled........................................................................................................................................................... 52
Inside the sled...................................................................................................................................................................... 53
Cooling shroud.....................................................................................................................................................................53
Removing the cooling shroud.......................................................................................................................................53
Installing the cooling shroud.........................................................................................................................................54
Processor blank and DIMM blank......................................................................................................................................55
Removing a processor or DIMM blank........................................................................................................................55
Installing a processor or DIMM blank..........................................................................................................................56
System memory...................................................................................................................................................................57
General memory module installation guidelines......................................................................................................... 58
Mode-specific guidelines.............................................................................................................................................. 59
Sample memory configurations................................................................................................................................... 60
Removing memory modules..........................................................................................................................................61
Installing memory modules........................................................................................................................................... 62
PCIe mezzanine card.......................................................................................................................................................... 64
Removing a PCIe mezzanine card...............................................................................................................................64
Installing a PCIe mezzanine card................................................................................................................................. 65
Internal dual SD module (optional)....................................................................................................................................66
Replacing an SD card....................................................................................................................................................66
Internal USB key............................................................................................................................................................ 67
Removing the optional IDSDM card............................................................................................................................68
Installing the optional IDSDM card.............................................................................................................................. 69
rSPI card (optional).............................................................................................................................................................70
Removing the optional rSPI card..................................................................................................................................71
Installing the optional rSPI card.................................................................................................................................... 71
SD vFlash card..................................................................................................................................................................... 72
Replacing the SD vFlash card...................................................................................................................................... 72
Network Daughter Card..................................................................................................................................................... 74
Removing the Network Daughter Card...................................................................................................................... 74
Installing the Network Daughter Card........................................................................................................................ 75
4
Contents
Processors............................................................................................................................................................................76
Removing a heat sink.....................................................................................................................................................77
Removing a processor...................................................................................................................................................78
Installing a processor.....................................................................................................................................................80
Installing a heat sink....................................................................................................................................................... 81
Hard drives or SSDs............................................................................................................................................................84
Hard drive or SSD bay numbering...............................................................................................................................84
Hard drive or SSD installation guidelines.................................................................................................................... 84
Removing a hard drive or SSD.....................................................................................................................................84
Installing a hard drive or SSD....................................................................................................................................... 85
Removing a hard drive or SSD blank...........................................................................................................................87
Installing a hard drive or SSD blank.............................................................................................................................88
Shutdown procedure for servicing a hard drive or SSD...........................................................................................89
Configuring the boot drive........................................................................................................................................... 89
Removing a 2.5-inch hard drive or SSD from a 2.5-inch hard drive or SSD carrier............................................. 89
Installing a 2.5-inch hard drive or SSD in a 2.5-inch hard drive or SSD carrier.....................................................90
Removing a 1.8-inch SSD from a 1.8-inch SSD carrier .............................................................................................91
Installing a 1.8-inch SSD in a 1.8-inch SSD carrier......................................................................................................91
Removing the hard drive or SSD cage........................................................................................................................92
Installing the hard drive or SSD cage..........................................................................................................................93
Hard drive backplane.......................................................................................................................................................... 94
Removing the hard drive or SSD backplane.............................................................................................................. 94
Installing the hard drive or SSD backplane.................................................................................................................96
PERC H730P slim card....................................................................................................................................................... 97
Removing a PERC H730P slim card............................................................................................................................97
Installing a PERC H730P slim card..............................................................................................................................98
Storage controller card.......................................................................................................................................................99
Removing the PCIe extender or storage controller card..........................................................................................99
Installing the PCIe extender or storage controller card........................................................................................... 101
NVRAM backup battery....................................................................................................................................................102
Replacing the NVRAM backup battery..................................................................................................................... 102
System board..................................................................................................................................................................... 104
Removing the system board.......................................................................................................................................104
Installing the system board......................................................................................................................................... 106
Trusted Platform Module..................................................................................................................................................109
Installing the Trusted Platform Module.....................................................................................................................109
Initializing the TPM for BitLocker users.....................................................................................................................110
Initializing the TPM for TXT users.............................................................................................................................. 110
7 Using system diagnostics............................................................................................................111
Dell Embedded System Diagnostics..................................................................................................................................111
Running the Embedded System Diagnostics............................................................................................................. 111
Running embedded system diagnostics from an external media............................................................................ 111
System diagnostics controls........................................................................................................................................112
8 Jumpers and connectors ........................................................................................................... 113
System board jumper settings.......................................................................................................................................... 113
System board connectors..................................................................................................................................................114
Disabling a forgotten password........................................................................................................................................ 115
Contents
5
9 Troubleshooting your system......................................................................................................116
Troubleshooting system memory..................................................................................................................................... 116
Troubleshooting hard drives.............................................................................................................................................. 117
Troubleshooting USB devices........................................................................................................................................... 117
Troubleshooting Solid State Drives.................................................................................................................................. 118
Troubleshooting an internal SD card................................................................................................................................ 118
Troubleshooting processors.............................................................................................................................................. 119
Troubleshooting the system board...................................................................................................................................119
Troubleshooting the NVRAM backup battery................................................................................................................120
10 Getting help.............................................................................................................................121
Contacting Dell....................................................................................................................................................................121
Accessing system information by using QRL.................................................................................................................. 121
Quick Resource Locator for FC630...........................................................................................................................122
6 Contents
Dell PowerEdge FC630 overview
The Dell PowerEdge FC630 is a half-height sled supported on the PowerEdge FX2 enclosure and support up to:
• One or two Intel Xeon E5-2600 v3 or E5-2600 v4 processors
• 24 DIMMs
• Single processor: Up to two 2.5-inch hard drives
• Single processor: Up to eight 1.8-inch SSDs
• Dual processor: Up to two 2.5-inch hard drives
• Dual processor: Up to eight 1.8-inch SSDs
Topics:
• Supported configurations for the PowerEdge FC630 system
• Front panel
• Diagnostic Indicators
• Locating Service Tag of your system
Supported configurations for the PowerEdge
FC630 system
The Dell PowerEdge FC630 system supports the following configurations:
1
Dell PowerEdge FC630 overview 7
Figure 1. FC630 configuration overview
Front panel
The features on the front panel include USB management port, iDRAC Direct LED indicator, sled handle and status indicator.
8
Dell PowerEdge FC630 overview
2.5-inch hard drive or SSD system
Figure 2. Front panel features — 2.5-inch hard drive or SSD system
1. Hard drives or SSDs 2. USB 3.0 port
3. USB 2.0 or iDRAC managed USB port 4. iDRAC Direct LED indicator
5. Sled handle 6. Status indicator
7. Sled power-on indicator, power button
Table 1. Front panel features — 2.5-inch hard drive or SSD system
Item Indicator, Button, or
Connector
Icon Description
1 Hard drives or SSDs
2.5-inch hard
drive system
Two 2.5-inch hot-swap SAS or
SATA hard drives or SAS or
SATA or PCIe SSDs.
NOTE: Use this button only if directed to do
so by qualified support personnel or by the
operating system's documentation.
2 USB 3.0 port A USB device is connected to the system.
3 USB 2.0 or iDRAC Direct port The USB management port can function as a regular
USB port or provide access to the iDRAC features. For
more information, see the Dell Integrated Dell Remote
Access Controller User's Guide at Dell.com/
idracmanuals.
4 iDRAC Direct LED indicator The management indicator lights when the iDRAC
controls the USB1 port for management functions.
5 Sled handle Used to slide the sled out of the enclosure.
6 Status indicator Provides information about the status of the system.
7 Sled power-on indicator,
power button
The power indicator turns on when the sled power is
on. The power button controls the power supply unit
output to the system.
Dell PowerEdge FC630 overview 9
1.8-inch SSD system
Figure 3. Front panel features — 1.8-inch SSD system
1. SSDs 2. USB 3.0 port
3. USB 2.0 port or iDRAC Direct port 4. iDRAC Direct LED indicator
5. Sled handle 6. Status indicator
7. Sled power-on indicator, power button
Table 2. Front panel features — 1.8-inch SSD system
Item Indicator, Button, or
Connector
Icon Description
1 SSDs
1.8-inch SSD
system
Eight 1.8-inch hot-swap SATA
SSDs.
NOTE: Use this button only if directed to do
so by qualified support personnel or by the
operating system's documentation.
2 USB 3.0 port A USB device is connected to the system.
3 USB 2.0 port or iDRAC Direct
port
The USB management port can function as a regular
USB port or provide access to the iDRAC features. For
more information, see the Dell Integrated Dell Remote
Access Controller User's Guide at Dell.com/
idracmanuals.
4 iDRAC Direct LED indicator The management indicator lights when the iDRAC
controls the USB1 port for management functions.
5 Sled handle Used to slide the sled out of the enclosure.
6 Status indicator Provides information about the status of the system.
7 Sled power-on indicator,
power button
The power indicator turns on when the sled power is
on. The power button controls the power supply unit
output to the system.
.
10
Dell PowerEdge FC630 overview
Diagnostic Indicators
The diagnostic indicators on the system front panel display error status during system startup.
iDRAC Direct LED indicator codes
NOTE: The iDRAC Direct LED indicator does not turn on for the USB mode.
Figure 4. iDRAC Direct LED indicator
1. iDRAC Direct status indicator
Table 3. iDRAC Direct LED indicators
Convention iDRAC Direct LED
indicator pattern
Condition
A Green Turns green for a minimum of two seconds at the starting and end of a file transfer.
B Flashing green Indicates file transfer or any operation tasks.
C Green and turns off Indicates that the file transfer is complete.
D Not lit Indicates that the USB is ready to be removed or that a task is complete.
The following table describes iDRAC Direct activity when configuring iDRAC Direct by using your laptop and cable (Laptop Connect).
Table 4. iDRAC Direct LED indicator patterns
iDRAC Direct LED
indicator pattern
Condition
Solid green for two seconds Indicates that the laptop is connected.
Flashing green (on for two
seconds and off for two
seconds)
Indicates that the laptop connected is recognized.
Turns off Indicates that the laptop is unplugged.
Using USB diskette or USB DVD or CD drives
The sled has USB ports on the front which allows you to connect a USB diskette drive, USB flash drive, USB DVD or CD drive, keyboard,
or mouse. The USB drives can be used to configure the sled.
To designate the USB diskette drive as the boot drive:
1. connect the USB drive
2. restart the system
3. enter the System Setup
Dell PowerEdge FC630 overview
11
4. set the drive as first in the boot sequence
The USB device is displayed in the boot order setup screen only if it is attached to the system before you run the System Setup. You can
also select the boot device by pressing F11 during system start-up and selecting a boot device for the current boot sequence.
Hard drive or SSD indicator patterns
The hard drive or SSD (Solid-State Drives) indicators display different patterns as drive events occur in the system.
NOTE: The sled must have a hard drive or SSD or a hard drive blank installed in each drive bay.
Figure 5. Hard drive or SSD indicators
1. drive activity indicator (green)
2. drive status indicator (green and amber)
NOTE:
If the drive is in Advanced Host Controller Interface (AHCI) mode, the status LED (on the right side) does not
function and remains off.
Drive-Status
Indicator
Pattern
Condition
Flashes green
twice per second
Identifying drive or preparing for removal
Off
Drive ready for insertion or removal
NOTE: The drive status indicator remains off until all drives are initialized after system power is
applied. Drives are not ready for insertion or removal during this time.
Flashes green,
amber, and then
turns off
Drive predicted failure
Flashes amber
four times per
second
Drive failed
Flashes green
slowly
Drive rebuilding
Steady green
Drive online
Flashes green for
three seconds,
Rebuild stopped
12 Dell PowerEdge FC630 overview
Drive-Status
Indicator
Pattern
Condition
amber for three
seconds, and
turns off after six
seconds
Locating Service Tag of your system
Your system is identified by a unique Express Service Code and Service Tag number. The Express Service Code and Service Tag are found
on the front of the system by pulling out the information tag. Alternatively, the information may be on a sticker on the chassis of the
system. This information is used by Dell to route support calls to the appropriate personnel.
Dell PowerEdge FC630 overview 13
Documentation resources
This section provides information about the documentation resources for your system.
Table 5. Documentation resources for system
Task Document Location
Setting up your system
For information about installing the system into a
rack, see the Rack documentation included with
your rack solution.
Dell.com/poweredgemanuals
For information about turning on the system and
the technical specifications of your system, see the
Getting Started With Your System that shipped
with your system.
Dell.com/poweredgemanuals
For information about Getting Started With Your
System that shipped with your system or the
Technical specifications section in this document.
Dell.com/poweredgemanuals
Configuring your system For information about iDRAC features, configuring
and logging in to iDRAC, and managing your
system remotely, see the Integrated Dell Remote
Access Controller User's Guide.
Dell.com/idracmanuals
For information about installing the operating
system, see the operating system documentation.
Dell.com/operatingsystemmanuals
For information about understanding Remote
Access Controller Admin (RACADM)
subcommands and supported RACADM interfaces,
see the RACADM Command Line Reference Guide
for iDRAC.
Dell.com/idracmanuals
For information about updating drivers and
firmware, see the Download firmware and drivers
section in this document.
Dell.com/support/drivers
Managing your system For information about the features of the Dell
OpenManage Systems Management, see the Dell
OpenManage Systems Management Overview
Guide.
Dell.com/openmanagemanuals
For information about setting up, using, and
troubleshooting OpenManage, see the Dell
OpenManage Server Administrator User’s Guide.
Dell.com/openmanagemanuals
For information about installing, using, and
troubleshooting Dell OpenManage Essentials, see
the Dell OpenManage Essentials User’s Guide.
Dell.com/openmanagemanuals
For information about installing and using Dell
System E-Support Tool (DSET), see the Dell
System E-Support Tool (DSET) User's Guide.
Dell.com/DSET
For information about installing and using Active
System Manager (ASM), see the Active System
Manager User’s Guide.
Dell.com/asmdocs
For understanding the features of Dell Lifecycle
Controller (LCC), see the Dell Lifecycle Controller
User’s Guide.
Dell.com/idracmanuals
2
14 Documentation resources
Task Document Location
For information about partner programs enterprise
systems management, see the OpenManage
Connections Enterprise Systems Management
documents.
Dell.com/
omconnectionsenterprisesystemsmanagement
For information about connections and client
systems management, see the OpenManage
Connections Client Systems Management
documentation.
Dell.com/dellclientcommandsuitemanuals
For information about viewing inventory,
performing configuration and monitoring tasks,
remotely turning on or off servers, and enabling
alerts for events on servers and components using
the Dell Chassis Management Controller (CMC),
see the CMC User’s Guide.
Dell.com/esmmanuals
Working with Dell PowerEdge
RAID controllers
For information about understanding the features
of the Dell PowerEdge RAID controllers (PERC)
and deploying the PERC cards, see the Storage
controller documentation.
Dell.com/storagecontrollermanuals
Understanding event and error
messages
For information about checking the event and
error messages generated by the system firmware
and agents that monitor system components, see
the Dell Event and Error Messages Reference
Guide.
Dell.com/openmanagemanuals > OpenManage
software
Documentation resources 15
Technical specifications
Chassis dimensions
Figure 6. Chassis dimensions
Table 6. Chassis dimensions of the Dell PowerEdge FC630 system
System
X Y Z
PowerEdge FC630 211.0 mm 40.3 mm 535.8 mm
Chassis weight
Table 7. Chassis weight
System Maximum weight
PowerEdge FC630
6.4 kg (14.11 lb)
Processor specifications
The PowerEdge FC630 system supports up one or two Intel Xeon E5-2600 v3 or E5-2600 v4 product family processors.
CAUTION: For processors of 105 W, 120 W, or 135 W, use heat sinks of 68 mm width.
CAUTION: For processors of 105 W (for acoustic configuration), 135 W (four cores, six cores, or eight cores), or 145 W,
use heat sinks of 104 mm width.
NOTE: Mixing processors of different wattages is not supported.
3
16 Technical specifications
System battery specifications
The PowerEdge FC630 system supports CR 2032 3.0-V lithium coin cell system battery.
Memory specifications
The PowerEdge FC630 system supports DDR4 registered DIMMs (RDIMMs) and load-reduced DIMMs (LRDIMMs).
Table 8. Memory specifications
Memory module
sockets
Memory capacity Minimum RAM Maximum RAM Speed
PowerEdge FC630
64 GB quad rank
(LRDIMMs)
4 GB with single
processor
• Up to 768 GB with a
single processor
• Up to 1536 GB with a
dual processor
2400 MT/s, 2133 MT/s,
or 1866 MT/s, DDR4
DIMMs
32 GB quad rank
(LRDIMMs)
2133 MT/s, or 1866
MT/s,, DDR4 DIMMs
4 GB, 8 GB, 16 GB or 32
GB single rank (RDIMMs)
2400 MT/s, 2133 MT/s,
or 1866 MT/s, DDR4
DIMMs
8 GB, 16 GB and 32 GB
dual rank (RDIMMs)
2400 MT/s, 2133 MT/s,
or 1866 MT/s, DDR4
DIMMs
RAID controllers
The PowerEdge FC630 system supports PERC H730P, PERC H730, PERC H330, and PERC H730P slim card .
PCIe mezzanine card slots
The PowerEdge FC630 system supports One PCIe x16 Gen 3 slot that supports PCIe mezzanine card
Driver specification
Hard drives
ThePowerEdge FC630 system supports:
• Up to two 2.5-inch, hot-swappable SAS, SATA hard drives or SAS or SATA or PCIe SSDs
SSDs
The PowerEdge FC630 system supports:
• Up to eight 1.8-inch, hot-swappable SATA SSDs
Optical drive
The PowerEdge FC630 system supports external optional USB DVD and one optional SATA DVD-ROM drive or DVD+/-RW drive.
Technical specifications
17
Flash drive
The PowerEdge FC630 system supports internal optional USB, internal optional SD card and optional vFlash card (with integrated iDRAC8
Enterprise).
Ports and connectors specifications
USB ports
The PowerEdge FC630 system supports:
• One USB 2.0-compliant and one USB 3.0-compliant port on the front panel
• Internal USB 2.0-compliant port
The following table provides more information about the USB specifications:
Table 9. USB specifications
System Front panel Internal
PowerEdge FC630
One 4-pin, USB 2.0-compliant and one 4-
pin, USB 3.0-compliant
• Two internal SD cards dedicated for the
hypervisor
• One SD card dedicated for future vFlash
support
Internal Dual SD Module
The PowerEdge FC630 system supports two SD card slots and a USB interface dedicated for the embedded hypervisor. This card offers
the following features:
• Dual card operation — maintains a mirrored configuration by using SD cards in both slots and provides redundancy.
• Single card operation — single card operation is supported, but without redundancy.
Video specifications
The PowerEdge FC630 system supports Matrox G200 VGA controller integrated with iDRAC and 2 GB shared with iDRAC application
memory.
Environmental specifications
NOTE:
For additional information about environmental measurements for specific system configurations, see Dell.com/
environmental_datasheets.
Table 10. Temperature specifications
Temperature Specifications
Storage –40°C to 65°C (–40°F to 149°F)
Continuous operation (for altitude less than 950 m or 3117 ft) 10°C to 35°C (50°F to 95°F) with no direct sunlight on the
equipment.
Fresh air For information about fresh air, see Expanded Operating
Temperature section.
Maximum temperature gradient (operating and storage) 20°C/h (36°F/h)
18 Technical specifications
Table 11. Relative humidity specifications
Relative humidity Specifications
Storage 5% to 95% RH with 33°C (91°F) maximum dew point.
Atmosphere must be noncondensing always.
Operating 10% to 80% Relative Humidity with 29°C (84.2°F) maximum dew
point.
Table 12. Maximum vibration specifications
Maximum vibration Specifications
Operating 0.26 Grms at 5 Hz to 350 Hz (all operation orientations).
Storage 1.88 Grms at 10 Hz to 500 Hz for 15 min (all six sides tested).
Table 13. Maximum shock specifications
Maximum shock Specifications
Operating Six consecutively run shock pulses in the positive and negative x, y,
and z axes of 40 G for up to 2.3 ms.
Storage Six consecutively run shock pulses in the positive and negative x, y,
and z axes (one pulse on each side of the system) of 71 G for up to
2 ms.
Table 14. Maximum altitude specifications
Maximum altitude Specifications
Operating 3048 m (10,000 ft).
Storage 12,000 m (39,370 ft).
Table 15. Operating temperature derating specifications
Temperature Specifications
Up to 35 °C (95 °F) Maximum temperature is reduced by 1°C/300 m (1°F/547 ft)
above 950 m (3,117 ft).
35 °C to 40 °C (95 °F to 104 °F) Maximum temperature is reduced by 1°C/175 m (1°F/319 ft)
above 950 m (3,117 ft).
40 °C to 45 °C (104 °F to 113 °F) Maximum temperature is reduced by 1°C/125 m (1°F/228 ft)
above 950 m (3,117 ft).
Particulate and gaseous contamination specifications
The following table defines the limitations that help avoid any equipment damage or failure from particulates and gaseous contamination. If
the levels of particulates or gaseous pollution exceed the specified limitations and result in equipment damage or failure, you may need to
rectify the environmental conditions. Remediation of environmental conditions is the responsibility of the customer.
Table 16. Particulate contamination specifications
Particulate contamination Specifications
Air filtration
Data center air filtration as defined by ISO Class 8 per ISO 14644-1
with a 95% upper confidence limit.
NOTE: This condition applies only to data center
environments. Air filtration requirements do not apply to
IT equipment designed to be used outside a data center,
in environments such as an office or factory floor.
Technical specifications 19
Particulate contamination Specifications
NOTE: Air entering the data center must have MERV11 or
MERV13 filtration.
Conductive dust
Air must be free of conductive dust, zinc whiskers, or other
conductive particles.
NOTE: This condition applies to data center and nondata
center environments.
Corrosive dust • Air must be free of corrosive dust.
• Residual dust present in the air must have a deliquescent point
less than 60% relative humidity.
NOTE: This condition applies to data center and nondata
center environments.
Table 17. Gaseous contamination specifications
Gaseous contamination Specifications
Copper coupon corrosion rate <300 Ã…/month per Class G1 as defined by ANSI/ ISA71.04-1985.
Silver coupon corrosion rate <200 Ã…/month as defined by AHSRAE TC9.9.
NOTE: Maximum corrosive contaminant levels measured at ≤50% relative humidity.
Expanded operating temperature
Table 18. Expanded operating temperature specifications
Expanded operating temperature Specifications
Continuous operation 5°C to 40°C at 5% to 85% RH with 29°C dew point.
NOTE: Outside the standard operating temperature
(10°C to 35°C), the system can operate continuously in
temperatures as low as 5°C and as high as 45°C.
For temperatures between 35°C and 40°C, derate maximum
allowable temperature by 1°C per 175 m above 950 m (1°F per 319
ft).
< 1% of annual operating hours –5°C to 45°C at 5% to 90% RH with 29°C dew point.
NOTE: Outside the standard operating temperature
(10°C to 35°C), the system can operate down to –5°C
or up to 45°C for a maximum of 1% of its annual
operating hours.
For temperatures between 40°C and 45°C, de-rate maximum
allowable temperature by 1°C per 125 m above 950 m (1°F per 228
ft).
NOTE: When operating in the expanded temperature range, system performance may be impacted.
NOTE: When operating in the expanded temperature range, ambient temperature warnings may be reported on the LCD
panel and in the System Event Log.
20 Technical specifications
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122

Dell PowerEdge FX2/FX2s Owner's manual

Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI