LG M4214C User manual

Category
Flat panel accessories
Type
User manual

This manual is also suitable for

www.lg.com
ENGLISH
MONITOR SIGNAGE
MONITOR SIGNAGE MODELS
M4214C
Please read this manual carefully before operating
your set and retain it for future reference.
OWNER’S MANUAL
2
Table of Contents
Accessories 3
Connecting the Stand 4
Connecting the Speakers 5
Portrait Mode 6
Using the Remote Control 7
Part Names and Functions 9
Connecting to External Devices 10
Connecting to Your PC .......................................................................................................10
Using the LAN ......................................................................................................................12
Daisy Chaining Set ..............................................................................................................13
VESA FDMI Wall Mounting .................................................................................................14
Cable Management .............................................................................................................15
Video Input ...........................................................................................................................16
Component Input (480i/480p/576i/576p/720p/1080i/1080p) ..........................................17
HDMI Input (480p/576p/720p/1080i/1080p) ......................................................................18
User Menus 19
Screen Adjustment Options ..............................................................................................19
OSD Menu ............................................................................................................................21
Adjusting the OSD (On-Screen Display) .........................................................................22
Adjusting the Screen Automatically .................................................................................22
Adjusting Screen Color ......................................................................................................23
Adjusting Audio ...................................................................................................................29
Adjusting the Timer.............................................................................................................30
Selecting Options ...............................................................................................................31
Screen Tiling Options .........................................................................................................33
USB Options ........................................................................................................................35
Troubleshooting 49
Specifications 52
Controlling Multiple Set A1
3
NC2000 Kit
Applicable only for models that support the NC2000.
Optional accessories are subject to change without prior notice to improve the performance of the set. New
optional accessories may be added periodically.
Optional accessories (purchased separately) may vary depending on the model.
Note that optional accessories may look different from those shown here.
Thank you for your purchase. Check to make sure that the accessories shown immediately below have been
included with your set.
Note that the accessories may look different from those shown here.
Speaker Kit
Applicable only for models that support the speakers.
Stand Kit
Applicable only for models that support stand.
Remote Control
/ Batteries
CD-ROM / Cards
D-Sub Signal
Cable
Speaker(2)
NC2000 CD-ROM /
Cards
Screws (2)
Screws (4)
/ Cable (2)
Power Cable Audio Cable (PC)
Cable holder/Cable tie
They may not
be available
in some areas
or for some
models.
Included Accessories
Separately Purchased Accessories
Accessories
Stand (1)
Screws (6)
Cable management (1)
4
Connecting the Stand
First, check if the following parts are all present.
Parts
Take the parts for the stand out of the box and assemble them as
shown in the picture.
Place a soft cloth on a table and place the set screen side down upon the table.
Connect the stand as shown below.
Use the screws to secure the stand on the rear side of the set as shown
below.
- Only on some models.
2.
3.
1.
Stand (1)
Screws (6)
Cable management (1)
5
Connecting the Speakers
Attach the speakers to the set using screws as shown below. Then, connect the
speaker cable.
When the speakers are installed.
*Connect the input terminal with the
proper color match.
Remove the paper.
Cable holder
After installing your speakers, use holders and cable ties to organize the speaker
cables.
* This feature is not available on all models.
Cable ties
* This feature is not available on all models.
- Only on some models.
6
Portrait Mode
"When installing in portrait mode, rotate the set clockwise."
- Only on some models.
7
Using the Remote Control
Remote Control Buttons
1
2
5
3
4
7
6
9
8
13
12
11
10
P
A
G
E
INPUT
ENERGY
SAVING
MARK
ARC
ON
OFF
. , !
ABC
DFG
GHI
JKL
MNO
PQRS
TUV
1/a/A
- * #
WXYZ
CLEAR
OK
S.MENU
MONITOR
PSM
AUTO
MUTE
BRIGHT
NESS
MENU
ID
BACK
TILE
ON
OFF
EXIT
1
2
5
4
7
6
9
8
13
12
11
10
3
POWER On / Off Button
- Switches the set on from standby or off to
standby.
MONITOR On / Off Button
- Turns off the monitor and then turn it back on.
Number and Letter Buttons
- Type numbers and letters.
1/a/A Button
- Selects numbers and letters. (SuperSign
input only).
Volume Up/Down Button
- Adjusts the volume.
PSM Button
- Selects the Picture Status mode.
MUTE Button
- Switches the sound on or off.
MENU Button
- Selects a menu.
- Clears all on-screen displays and returns to
monitor viewing from any menu.
Up/Down/Left/Right Buttons
- Allows you to navigate the on-screen menus
and adjust the system settings to your
preference.
OK Button
- Accepts your selection or displays the
current mode.
BACK Button
- Allows the user to move return one step in an
interactive application.
ID ON/OFF Button
- Enables set lock.
USB Menu Control Buttons
- Adjusts the USB menu (Photo List, Music
List and Movie List).
8
ENERGY SAVING Button
- Adjusts the Energy Saving mode of the set.
INPUT Select Button
Accesses the Input Signal Window.
Selects the signal type you want using ◄.
CLEAR Button
- Deletes the numbers and letters you typed
(SuperSign input only).
ARC Button
- Selects the Aspect Ratio mode.
BRIGHTNESS Button
- Adjusts the resolution and brightness by
pressing Up and Down.
- In USB mode, the OSD menu has the Page
function to move to the next file list.
AUTO Button
- Automatically adjusts picture position and
minimizes image instability (RGB input only).
S.MENU Button (SuperSign Menu Key)
- Selects the SuperSign OSD Menu
(SuperSign input only).
EXIT Button
- Clears all on-screen displays and returns to set
normal viewing from any menu.
TILE Button
- Selects the TILE mode.
Using the Remote Control
1. Slide off the battery cover.
2. Insert the batteries with correct polarity ( + / - ).
3. Close the battery cover.
4. To remove the batteries, perform the installation actions
in reverse.
Dispose of used batteries accordance with local
regulations to prevent environmental pollution.
Inserting Batteries into the Remote Control
14
15
16
18
19
17
20
21
22
P
A
G
E
INPUT
ENERGY
SAVING
MARK
ARC
ON
OFF
. , !
ABC
DFG
GHI
JKL
MNO
PQRS
TUV
1/a/A
- * #
WXYZ
CLEAR
OK
S.MENU
MONITOR
PSM
AUTO
MUTE
BRIGHT
NESS
MENU
ID
BACK
TILE
ON
OFF
EXIT
14
15
18
16
19
17
20
21
22
AAA Type
Input List
AV Component RGB HDMI/DVI SuperSign
9
Part Names and Functions
Rear View
* LINE OUT
A terminal that is used to connect to the speaker including a built-in amplifier (amp).
Check the connecting terminal of the PC sound card before connecting. If the Audio Out of the PC
sound card only has a Speaker Out jack, reduce the PC volume. If the Audio Out of the PC sound card
supports both Speaker Out and Line Out, convert to Line Out using the card jumper of the program
(refer to your sound card's manual).
* The set image in the user's guide may be different from the actual image.
Power Connector
Connect the power cord.
RS-232C Serial Ports
RGB, HDMI/DVI Ports
HDMI supports high definition input and HDCP (High-bandwidth Digital
Content Protection). Some devices require HDCP in order to display HD
signals.
PC Sound Jack
Connect the audio cable to the LINE OUT* jack of the PC sound card.
AV Ports
USB Port
LAN Port
Speaker Ports
1
2
4
3
6
5
8
7
1 2
43 65 87
10
Check that the computer, monitor and the peripherals are turned off. Then, connect the
signal input cable.
Connecting with a D-Sub Signal Input Cable.
Connecting with an HDMI-DVI Signal Input Cable (not included)
* When HDMI PC is used, a compatibility problem may occur.
MAC
Macintosh Adapter (not included)
Use the standard Macintosh adapter since an incompatible adapter
that uses a different signaling system is available on the market.
Connecting to External Devices
Connect the power cord.
PC
PC/MAC
PC
PC
Rear back of the set.
Rear back of the set.
Rear back of the set.
Rear back of the set.
Connect the Audio cable.
(not included)
* Use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to
maintain standard compliance with your set.
Connecting to Your PC
1
2
3
B.
B.
A.
A.
11
Select an input signal.
Press INPUT on the remote control to select the input signal.
Or, press SOURCE on the bottom of the set.
Connecting two computers.
Connect the signal cables (HDMI-DVI and D-Sub) to each computer.
Press INPUT on the remote control to select the computer to use.
Connect to a grounded power outlet directly on the wall or on a grounded power strip.
Note
Press Power.
Turn on the PC.
Connecting with a D-Sub Signal Input Cable.
Select RGB: 15-pin D-Sub analog signal.
Connecting with an HDMI to DVI Signal Input Cable.
Select HDMI/DVI: DVI Digital signal or HDMI Digital signal.
Connecting to External Devices
INPUT → ◄ ► → OK
Power button
2.
1.
B.
A.
4
5
Input List
AV Component RGB HDMI/DVI SuperSign
Input List
AV Component RGB HDMI/DVI SuperSign
SOURCE →◄ ► → AUTO/SET
12
Using a LAN establishes communication between your PC and the set and enables
use of the OSD menus on the PC as well as the set.
Note
Connecting to External Devices
Connect the LAN cable as shown below.
Connect the LAN cable and install the eZ-Net Manager program on the CD-ROM.
For more information about the program, please refer to the eZ-Net Guide on the included
CD-ROM.
Connect PC to Monitor.
Using a Router (Switch).
PC
Set
Network
Network
Set
LAN
PC
LAN
Switch
Using the Internet.
PC
Set
Network
LAN
Using the LAN
1
2
B.A.
C.
13
Using RGB Input
Using AV Input
To use different set connected to each other, connect one end of the signal input cable
(15-pin D-Sub signal cable) to the RGB OUT connector of set 1 and connect the other
end to the RGB IN connector of other set.
Connecting to External Devices
Set 1
Set 1
Set 2
Set 2
Set 3
Set 3
Set 4
15-pin D-Sub Signal Cable
PC
Daisy Chaining Set
Video/TV
PC
BNC Cable
(not included)
Audio Cable
(not included)
The number of set that can be connected to one output may vary depending on signal
status and cable loss. If the signal status is good, and there is no cable loss, it is pos-
sible to connect up to 9 set. If you want to connect more than nine, a distributor is
recommended.
Note
B.
A.
14
Kensington Security Slot
The set is equipped with a Kensington
Security System connector on the back
panel. The cable and lock are available
separately and are not sold by LG. For
more info, visit http://www.kensington.
com.
This set supports a VESA FDMI compliant mounting interface. These mounts are
purchased separately and are not available from LG. Refer to the instructions
included with your wall mount for more info.
Connecting to External Devices
VESA FDMI Wall Mounting
Note
There is a switch on the lower side of the back. You can set the switch to "On"
before connecting a power cord to make it more convenient.
15
Note
Connecting to External Devices
Cable Management
- Only on some models.
Cable
Management
Hold the Cable management with both hands
and pull it downward.
Removing the cable guide.
Do not use the cable management as a handle for the Monitor.
Arrange the cables in the center as shown in the following picture.
Fit the cable guide to the back to help manage the cables.
2.
1.
16
Connecting to External Devices
Connecting with a BNC Cable
Select AV.
Connect the video cable as shown below and then connect the power cord
(see page 10).
Connecting with a BNC Cable
Connect the input terminal with a proper color match.
BNC Cable
(not included)
Set
VCR/DVD Receiver
Select an input signal.
Press INPUT on the remote control to select the input signal.
Or, press SOURCE on the bottom of the set.
Audio Cable
(not included)
Video Input
INPUT → ◄ ► → OK
1
2
Input List
AV Component RGB HDMI/DVI SuperSign
SOURCE →◄ ► → AUTO/SET
17
Select Component.
Connect the AV cable as shown in the below figure, then connect the power cord (see page 10).
Connect the input terminal with the matching color.
BNC Cable
(not included)
HDTV Receiver
Select an input signal.
Press INPUT on the remote control to select the input signal.
Or, press SOURCE on the bottom of the set.
Audio Cable
(not included)
Connecting to External Devices
Note:
- Some devices may require HDCP in order to display HD signals.
- Component doesn't support HDCP.
Component Input (480i/480p/576i/576p/720p/1080i/1080p)
INPUT → ◄ ► → OK
1
2
Input List
AV Component RGB HDMI/DVI SuperSign
Set
SOURCE →◄ ► → AUTO/SET
18
Connect the AV cable as shown below and connect the power cord (see page 10).
RCA-PC
Audio Cable
(not included)
VCR/DVD/Set-top Box
HDMI-DVI
Signal Cable
(not included)
VCR/DVD/Set-top Box
Select an input signal.
Press INPUT on the remote control to select the input signal.
Or, press SOURCE on the bottom of the set.
HDMI Signal Cable
(not included)
Connecting to External Devices
Connecting with an HDMI-DVI Signal Input Cable or an HDMI Signal Input Cable.
Select HDMI/DVI.
HDMI supports high definition input and HDCP (High-bandwidth Digital Content
Protection). Some devices require HDCP in order to display HD signals.
Note: Dolby Digital is not supported.
HDMI Input (480p/576p/720p/1080i/1080p)
INPUT → ◄ ► → OK
1
2
Input List
AV Component RGB HDMI/DVI SuperSign
Set
Set
SOURCE →◄ ► → AUTO/SET
19
User Menus
Screen Adjustment Options
Turns the set on/off.
This Indicator lights up green when the set is operating
normally (on mode). If the set is in sleep mode (Energy
Saving), the indicator color changes to amber.
Power Button
◄ ► Adjusts the volume.
▲ ▼ Adjusts up and down.
Shows/hides the OSD (On-Screen Display) menu.
MENU Button
Selects an icon or adjusts the setting in the OSD menu.
OSD Select /
Adjust Button
Power Indicator
Volume
35
1
2
3
4
6 3 4 5 1
7
2
20
User Menus
The sensor from which the set receives signals from the
remote control.
Screen Adjustment Options
[For PC Analog signal]
AUTO/SET Button
AV Composite Video
Component HDTV, DVD
RGB 15-pin D-Sub analog signal
HDMI/DVI Digital signal
SuperSign SupeSign
- Toggles between inputs
SOURCE Button
IR Receiver
Auto in progress
5
7
6
SOURCE → ◄ ► → AUTO/SET
Input List
AV Component RGB HDMI/DVI SuperSign
[When XGA Mode is active and
1920 x 1080 is selected]
Auto in progress
For optimal display change
resolution to 1920 x 1080
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89

LG M4214C User manual

Category
Flat panel accessories
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI