Hoist Fitness CF-3754 User manual

Hoist Fitness
Brand
Hoist Fitness
Model
CF-3754
Category
Fitness, gymnastics & weight training
Type
User manual

Hoist Fitness CF-3754 is a dual action smith machine. It is a versatile piece of equipment that can be used for a variety of exercises, including squats, presses, rows, and curls. The machine is designed to provide a smooth and stable workout, and it is ideal for both beginners and experienced lifters.

Some of the key features of the Hoist Fitness CF-3754 include:

  • Heavy-duty steel construction for durability and stability
  • Linear bearings for smooth and precise operation
  • Adjustable safety bars for added safety and support
  • Weight horns for easy weight storage
  • Compact design for space efficiency

Hoist Fitness CF-3754 is a dual action smith machine. It is a versatile piece of equipment that can be used for a variety of exercises, including squats, presses, rows, and curls. The machine is designed to provide a smooth and stable workout, and it is ideal for both beginners and experienced lifters.

Some of the key features of the Hoist Fitness CF-3754 include:

  • Heavy-duty steel construction for durability and stability
  • Linear bearings for smooth and precise operation
  • Adjustable safety bars for added safety and support
  • Weight horns for easy weight storage
  • Compact design for space efficiency
**WARNING!**
TO PREVENT POSSIBLE TIPPING, BOLT THIS UNIT TO THE
EXERCISE FLOOR. FAILURE TO DO SO MAY RESULT IN SERIOUS
INJURY OR DEATH.
CATALOG NUMBER
OWNER'S MANUAL
RECORD SERIAL NUMBER HERE
Fax
(800) 548-5438
(858) 578-7676
(858) 578-9558
Note: Both Serial Number and Model Number are Required when Ordering Parts
Customer Service
0609 - 000
CF-3754
DUAL ACTION SMITH
02
04
19
21
22
24
28
29
31
33
34
35
36
37
38
OWNER'S MANUAL
PAGE 01 CF-3754 ASSEMBLY
INSTRUCTIONS .....................................................................
FRAME ASSEMBLY ..............................................................
PRE-ASSEMBLY....................................................................
DECAL PLACEMENT.............................................................
DECAL REFERENCE.............................................................
PART LIST...............................................................................
ABBREVIATIONS...................................................................
BOLT SIZING CHART............................................................
WASHER SIZING CHART......................................................
MAINTENANCE SCHEDULE.................................................
GENERAL MAINTENANCE INFORMATION........................
WEIGHT TRAINING TIPS.......................................................
WEIGHT RATIOS....................................................................
EXERCISE LOG......................................................................
LIMITED WARRANTY............................................................
CONTENTS
OWNER'S MANUAL
PAGE 02CF-3754 ASSEMBLY
Ratchet Wrench
1/2", 9/16" and 3/4" Sockets
Adjustable Wrench
Rubber Mallet
Tape Measure
Level
Hex Key Wrench Set
Two People
TOOLS REQUIRED
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that
all parts have been included in your shipment. When ordering, use part
number and description from the lists. Use only HOIST replacement parts
when servicing. Failure to do so will void your warranty and could result
in personal injury.
HOIST equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly.
If you are unable to correct the problem, call your authorized HOIST dealer.
Be sure to have your serial number and this manual when calling. When all
parts have been accounted for, continue on.
INSTRUCTIONS
OWNER'S MANUAL
PAGE 03 CF-3754 ASSEMBLY
***THIS PAGE WAS INTENTIONALLY LEFT BLANK***
OWNER'S MANUAL
PAGE 04
CF-3754 ASSEMBLY
FRAME ASSEMBLY
32
84
57
10
79
38
57
77
57
57
84
74
64
56
9
HAND TIGHTEN THESE BOLTS IN THIS STEP
FRAME ASSEMBLY
IN A LATER STEP.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
WILL BE WRENCH TIGHTENED
NOTE:
- WRENCH TIGHTEN HARDWARE
EXCEPT FOR (2) LOWER BOLTS
#79. HAND TIGHTEN THEM. THEY
PAGE 05 CF-3754 ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
CF-3754 ASSEMBLY
OWNER'S MANUAL
PAGE 06
32
57
82
57
84
14
9
NOTE ORIENTATION:
HOLES THIS EDGE
- WRENCH TIGHTEN HARDWARE AND ALSO
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
THE BOLTS HAND TIGHTENED ON PAGE 06.
FRAME ASSEMBLY
NOTE:
OWNER'S MANUAL
PAGE 07 CF-3754 ASSEMBLY
83
13
56
76
56
64
75
76
56
14
56
83
56
32
84
81
57
5
6
57
84
57
5
57
84
57
81
57
57
80
84
57
80
7
- HAND TIGHTEN HARDWARE.
NOTE:
FRAME ASSEMBLY
BE SURE TO ALWAYS SUPPORT UPRIGHTS (5) THROUGH THE FOLLOWING STEPS
UNTIL ASSEMBLY IS SECURED.
FAILURE TO FOLLOW THESE DIRECTIONS MAY RESULT IN SERIOUS INJURY OR DEATH.
CF-3754 ASSEMBLY
OWNER'S MANUAL
PAGE 08
OR DEATH.
SERIOUS INJURY
COULD RESULT IN
PREVIOUSLY HAND TIGHTENED HARDWARE.
- WRENCH TIGHTEN HARDWARE AND ALL
FRAME ASSEMBLY
NOTE:
FAILURE TO DO SO
BEING ASSEMBLED.
SUPPORT ALL MEMBERS
BE SURE TO ALWAYS
*WARNING!*
*IMPORTANT*
ASSURE THAT YOUR UNIT
IS ASSEMBLED SQUARE
AND PERPENDICULAR.
USE A LEVEL TO CHECK
THAT THE UPRIGHTS
ARE PERPENDICULAR
IN BOTH DIRECTIONS.
IF THEY ARE NOT
PERPENDICULAR IN
BOTH DIRECTIONS,
IT WILL BE NECESSARY
TO LOOSEN SOME FRAME
HARDWARE TO RE-ALIGN
THE FRAME AND
RETIGHTEN BOLTS.
OWNER'S MANUAL
PAGE 09 CF-3754 ASSEMBLY
57
48
56
64
73
49
944
79
57
46
84
5
57
80
84
57
8
10
11
37
FRAME ASSEMBLY
NOTE:
- MOUNT (18) TO (4) AND HAND TIGHTEN HARDWARE.
- CAREFULLY INSTALL SHAFT (29) INTO (18)
AS SHOWN, AND BE SURE NOT TO DAMAGE
THE BEARINGS.
- CAREFULLY INSTALL SHAFT (28) THROUGH THE HOUSING ON (8),
RUBBER BUMPER (25),THEN INTO (4) AS SHOWN.
BE SURE NOT TO DAMAGE THE BEARINGS.
- ALIGN SHAFT (29) TO THE MOUNTING HOLES IN (8) AND HAND
TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
CF-3754 ASSEMBLY
OWNER'S MANUAL
PAGE 10
29
25
28
60
63
72
8
65
59
54
1
18
THREADED END
64
28
1
34
58
66
68
29
56
FRAME ASSEMBLY
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
- SOME PARTS MAY HAVE BEEN REMOVED FOR CLARITY.
SHAFTS ARE PROPERLY ALIGNED.
NOTE:
- WRENCH TIGHTEN HARDWARE TO SECURE (28).
- NOW THE HARDWARE FROM PAGE 1O NEEDS
TO BE TIGHTENED IN SEQUENCE TO ALIGN THE
SHAFTS. MOVE (1) TO THE MIDDLE OF SHAFT (28)
AND SEMI-TIGHTEN THE HARDWARE CONNECTING
(18) TO (1) AND ALSO THE TWO MIDDLE BOLTS
CONNECTING SHAFT (29) TO (8).
- MOVE (1) ALONG THE SHAFTS TO ONE END AND
SEMI-TIGHTEN THE BOLT AT THAT END
CONNECTING (29) TO (8), THEN MOVE (1)
TO THE OPPOSITE END AND TIGHTEN THAT BOLT.
- MOVE (1) BACK AND FORTH ALONG THE SHAFT
TO CHECK FOR SMOOTHNESS OF OPERATION
AND RE-ADJUST AS NEEDED.
- WRENCH TIGHTEN ALL HARDWARE AFTER THE
OWNER'S MANUAL
PAGE 11 CF-3754 ASSEMBLY
FRAME ASSEMBLY
NOTE:
- ASSEMBLE WEIGHT HORNS (15) ONTO THE
WEIGHT BAR (16).
OWNER'S MANUAL
CF-3754 ASSEMBLY PAGE 12
15
16
15
15
1
2
27
43
15
27
FRAME ASSEMBLY
- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.
- WRENCH TIGHTEN HARDWARE.
NOTE:
- THERE ARE PREVIOUSLY INSTALLED SET
SCREWS (71) IN THE SHAFT MOUNTS ON
(1) & (2). BACK OFF THESE SET SCREWS
TO ALLOW INSERTION OF SHAFTS (27).
- ALIGN THE WEIGHT HORNS (15) TO THE
SHAFT MOUNTS ON (1) & (2).
- CAREFULLY INSTALL SHAFTS (27) THRU
(15). BE SURE NOT TO DAMAGE THE BEARINGS.
- SEAT SHAFTS (27) INTO THE MOUNTS ON (1) & (2).
CF-3754 ASSEMBLYPAGE 13
OWNER'S MANUAL
71
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
CF-3754 ASSEMBLY
OWNER'S MANUAL
PAGE 14
57
78
27
57
84
35
3
56
64
68
4
2
27
1
31
31
30
47
47
69
64
56
5
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
FRAME ASSEMBLY
OWNER'S MANUAL
PAGE 15 CF-3754 ASSEMBLY
67
61
55
36
11
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
OWNER'S MANUAL
CF-3754 ASSEMBLY PAGE 16
FRAME ASSEMBLY
OWNER'S MANUAL
PAGE 17 CF-3754 ASSEMBLY
USE AS SHOWN HERE
12
12
13
IN THEIR HOLDERS WHEN NOT IN
SAFETY BARS ARE TO BE STORED
*IMPORTANT*
ALWAYS ENGAGE BOTH SAFETY BARS WHEN IN USE.
CHECK TO SEE THE BARS ARE INDEXED AT THE SAME
HEIGHT FRONT TO BACK AND SIDE TO SIDE.
SEE PAGE 18 FOR MORE INFORMATION
STEP 3
LOCK THE SAFETY BAR BY
ROTATING THE HANDLE
DOWNWARD TO A VERTICAL
POSITION.
FRAME ASSEMBLY
*IMPORTANT*
- TO USE THE SAFETY BARS THEY MUST
BE LOCKED IN PLACE. FOLLOW STEPS
1 THRU 3.
- TO UNLOCK AND REMOVE SAFETY BARS
REVERSE STEPS 1 THRU 3.
- ALWAYS ENGAGE BOTH SAFETY BARS
WHEN IN USE.
- CHECK TO SEE THE BARS ARE INDEXED
AT THE SAME HEIGHT FRONT TO BACK
AND SIDE TO SIDE.
OWNER'S MANUAL
CF-3754 ASSEMBLY PAGE 18
12
39
STEP 1
INSERT TAPERED END INTO
HOLE IN THE UPRIGHT.
40
12
STEP 2
ALIGN THE LOCK LUG TO
THE KEY SLOT AND INSERT
THIS END FULLY
PRE-ASSEMBLY
PAGE 19 CF-3754 ASSEMBLY
OWNER'S MANUAL
43
21
17
17
21
23
19
15
19
23
20
53
20
22
52
33
41
43
42
24
45
7
77
57
39
11
84
57
10
39
15
1
2
57
77
57
77
57
77
45
45
84
57
84
57
84
57
24
17
21
19
23
20
53
20
22 21
17
57
84
57
84
57
77
57
77
23
19
52
33
41
71
42
71
71
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39

Hoist Fitness CF-3754 User manual

Hoist Fitness
Brand
Hoist Fitness
Model
CF-3754
Category
Fitness, gymnastics & weight training
Type
User manual

Hoist Fitness CF-3754 is a dual action smith machine. It is a versatile piece of equipment that can be used for a variety of exercises, including squats, presses, rows, and curls. The machine is designed to provide a smooth and stable workout, and it is ideal for both beginners and experienced lifters.

Some of the key features of the Hoist Fitness CF-3754 include:

  • Heavy-duty steel construction for durability and stability
  • Linear bearings for smooth and precise operation
  • Adjustable safety bars for added safety and support
  • Weight horns for easy weight storage
  • Compact design for space efficiency
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents