iogear Q1280 User manual

iogear
Brand
iogear
Model
Q1280
Category
Cable interface/gender adapters
Type
User manual

iogear Q1280 is a USB 3.0 BoostLinq cable that allows you to extend the reach of your USB 3.0 devices by up to 50m/164ft. It is compatible with Windows Vista, Windows 7, Windows 8/8.1, and Mac OS X 10.6 or later. The cable supports data transfer speeds of up to 5Gbps and is backward compatible with USB 2.0 and USB 1.1 devices.

The Q1280 is a plug-and-play device, so no drivers are required. It is also self-powered, so no external power supply is needed.

The Q1280 is perfect for use with USB 3.0 devices such as external hard drives, printers, scanners, and webcams. It can also be used to extend the reach of USB 2.0 and USB 1.1 devices.

iogear Q1280 is a USB 3.0 BoostLinq cable that allows you to extend the reach of your USB 3.0 devices by up to 50m/164ft. It is compatible with Windows Vista, Windows 7, Windows 8/8.1, and Mac OS X 10.6 or later. The cable supports data transfer speeds of up to 5Gbps and is backward compatible with USB 2.0 and USB 1.1 devices.

The Q1280 is a plug-and-play device, so no drivers are required. It is also self-powered, so no external power supply is needed.

The Q1280 is perfect for use with USB 3.0 devices such as external hard drives, printers, scanners, and webcams. It can also be used to extend the reach of USB 2.0 and USB 1.1 devices.

USB 3.0 BoostLinq
Quick Start Guide
GUE310
PART NO. Q1280
www.iogear.com
System Requirements
Package Content
Installation
• Windows Vista
®
, Windows
®
7, Windows
®
8/8.1
• Mac OS X 10.6 or later
• Available USB 3.0 Port
1 x USB 3.0 BoostLinq
1 x USB 3.0 Type-A female to Type-A male Adapter
1 x Quick Start Guide
1 x Warranty Card
1 2 3
1. Connect the USB Type-A male connector of the USB 3.0
Extension Cable to any available USB 3.0 port on your computer.
2. Connect the USB Type-A male connector of your USB device to
the Female port end of the USB 3.0 BoostLinq Cable.*
3. If your USB device’s connector does not fit into the female port of
the extension cable, use the included USB Type-A female adapter
to connect your USB device and the USB extension cable.
4. Up to 4 additional USB 3.0 BoostLinq cables (up to 50m/164ft)
can be daisy chained together.*
*Additional power may be required when daisy chaining multiple
BoostLinq Extension Cables. Please visit www.shopiogear.com to
order part GUE310AC 1.5A external power supply.
FCC Statement
CE Compliance
This device has been tested and found to comply with the
following European Union directives: Electromagnetic Capability
(2004/108/EC), Low Voltage (2006/95/EC) and R&TTED
(1999/5/EC).
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential setting.
This product generates, uses, and can radiate radio frequency
energy and, if not installed and used as directed, it may cause
harmful interference to radio communications. Although this
product complies with the limits for a Class B digital device,
there is no guarantee that interference will not occur in a
particular installation.
Contact
Limited Warranty
iogear.custhelp.com
support@iogear.com
www.iogear.com
19641 Da Vinci, Foothill Ranch, CA 92610
WE’RE HERE TO HELP YOU!
NEED ASSISTANCE SETTING UP THIS PRODUCT?
Make sure you:
1. Visit www.iogear.com for more product information
2. Visit www.iogear.com/support for live help and product
support
Warranty Information
This product carries a 3 Year Limited Warranty. For the
terms and conditions of this warranty, please go to
http://www.iogear.com/support/warranty
Register online at http://www.iogear.com/register
Important Product Information
Product Model
Serial Number
© 2014 IOGEAR
®
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

iogear Q1280 User manual

iogear
Brand
iogear
Model
Q1280
Category
Cable interface/gender adapters
Type
User manual

iogear Q1280 is a USB 3.0 BoostLinq cable that allows you to extend the reach of your USB 3.0 devices by up to 50m/164ft. It is compatible with Windows Vista, Windows 7, Windows 8/8.1, and Mac OS X 10.6 or later. The cable supports data transfer speeds of up to 5Gbps and is backward compatible with USB 2.0 and USB 1.1 devices.

The Q1280 is a plug-and-play device, so no drivers are required. It is also self-powered, so no external power supply is needed.

The Q1280 is perfect for use with USB 3.0 devices such as external hard drives, printers, scanners, and webcams. It can also be used to extend the reach of USB 2.0 and USB 1.1 devices.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers