Konig Electronic VID-TRANS220KN Owner's manual

47

BEZDRÁTOVÝ VYSÍLAČ AUDIO

37

LANGATON AUDIOLÄHETIN

27

TRANSMISOR DE AUDIO

INALÁMBRICO

17

DRAADLOZE AUDIOZENDER

7

WIRELESS AUDIO TRANSMITTER

52

TRANSMIŢĂTOR AUDIO WIRELESS

42

TRÅDLÖS AUDIOSÄNDARE

32

VEZETÉK NÉLKÜLI

AUDIO JELÁTVIVŐ

22

AUDIOTRASMETTITORE

SENZA FILI

12

ÉMETTEUR AUDIO SANS FIL

WIRELESS AUDIO TRANSMITTER

VID-TRANS220KN

VID-TRANS230KN

2

ENGLISH

Introduction:

Transmit your music wireless through the house. Digital technology avoids interference

by other wireless systems. Ideal for use with stereo systems, MP3 players, computers

and notebooks.

Description:

Receiver VID-TRANS220KN

and VID-TRANS230KN

1) Audio out (RCA) right channel (red)

2) Audio out (RCA) left channel (white)

3) Audio out (3.5mm) for headphone (or

other output)

4) Channel selection button

5) Power input (9V

6) ON/OFF switch

6

6) ON/OFF switch

200mA)

Transmitter VID-TRANS220KN

1) Audio in (RCA) right channel (red)

2) Audio in (RCA) left channel (white)

3) Audio in right and left by 3.5mm plug

4) Channel selection button

5) Power input (9V 200mA)

Transmitter VID-TRANS230KN

1) Channel selection button

6

3

Connection:

Transmitter VID-TRANS220KN

1) Connect an audio source with the RCA

plugs to the audio input (1 and 2) or a

3,5mm plug to the audio input (2).

Note: it‘s not possible to use both inputs at

the same time.

2) Plug the DC power adapter plug into the

power input (5). Plug the adapter AC

power plug into a wall outlet.

Audio In

Line- In

CD

or

MP3

PC

Transmitter VID-TRANS230KN

Plug the USB transmitter into a free USB port of the notebook or PC.

Note: The LED of the (USB) transmitter on the VID-TRANS230KN will be flashing during

transmission. If during transmission the transmitter is pulled out and plugged in again, it‘s

possible that the music program on the notebook or PC needs to be restarted again to

restart transmission.

Receiver VID-TRANS220KN and VID-TRANS230KN

1) Connect the receiver with the RCA output (1 and 2) to an audio input of an audio system

or amplifier. It‘s also possible to use the 3.5mm output (3) to connect the receiver to an

audio input of an audio system or amplifier.

Audio

4

2) Connect a headphone to the 3.5mm

audio output (3) for listening with a

headphone.

Note: when the 3.5mm output is in use, the

RCA output (1 and 2) signal is shut off.

Earphone

3) Plug the DC power adapter plug to the power input (5). Plug the AC power adapter plug

into a wall outlet.

Operation :

1) When the AC/DC adapters are connected the receiver and transmitter are automatically

switched on (The USB transmitter is automatically powered via the 5 V USB port).

2) The transmitter is transmitting on one of the 8 available digital channels. The receiver is

automatically tuned to the same channel.

3) Push the channel selection button (4) on the transmitter when the channel in use is

receiving interference due to circumstances or other wireless systems.

4) After pushing the channel selection button on the transmitter, you also have to push the

channel selection button on the receiver. It will then automatically tune in to the channel

in use.

Specifications:

Transmitter VID-TRANS220KN

Frequency range: 2.400~2.483Ghz

Channels: 8

Modulation: FSK (Frequency Shift Keying)

Audio input: 2x RCA (R/L), 3.5mm

Power input: 9V/200mA

Transmitter VID-TRANS230KN

Frequency range: 2.400~2.483 Ghz

Channels: 8

Modulation: FSK (Frequency Shift Keying)

Audio input: via USB

Power input: via USB

Receiver VID-TRANS220KN and VID-TRANS230KN

Frequency range: 2.400~2.483 Ghz

Channels: 8

Modulation: FSK (Frequency Shift Keying)

Audio output: 2x RCA, 3.5mm

Signal noise ratio: 87dB

Power input: 9V/200mA

5

Declaration of conformity

We,

Nedis B.V.

De Tweeling 28

5215MC ’s-Hertogenbosch

The Netherlands

Tel.: 0031 73 599 1055

Email: info@nedis.com

Declare that product:

Brand: König Electronic

Model: VID-TRANS220KN, VID-TRANS230KN

Description: 2.4GHz wireless audio transmitter

Is in conformity with the following standards

EN 300 440-1 V1.3.1 (2001-09), EN 300 440-2 V1.1.1 (2001-09), EN 50371:2002,

EN 301 489-1 V1.4.1 (2002-08), EN 301 489-3 V1.4.1 (2002-08),

EN 55022: 1998+A1:2000+A2:2003 CLASS B, EN 61000-3-2:2000,

EN 61000-3-3:1995+A1:2001, EN 61000-4-2:1995+A1:1998+A2:2001,

EN 61000-4-3:2002+A1:2002, EN 61000-4-4:1995+A1:2001+A2:2001,

EN 61000-4-5:1995+A1:2001, EN 61000-4-6:1996+A1:2001,

EN 61000-4-11:1994+A1:2001

EN 60065:2002, EN 60950-1:2001+A11:2004

And complies with the requirements of the European Union Directive 1999/5/EC.

‘s-Hertogenbosch, 22-10-2008

Mrs. J. Gilad

Purchase Director

6

Safety precautions:

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

To reduce risk of electric shock, this product should

ONLY be opened by an authorized technician when

service is required. Disconnect the product from mains

and other equipment if a problem should occur. Do not expose the product to water or

moisture.

Maintenance:

Clean only with a dry cloth. Do not use cleaning solvents or abrasives.

Warranty:

No guarantee or liability can be accepted for any changes and modifications of the

product or damage caused due to incorrect use of this product.

General:

Designs and specifications are subject to change without notice.

All logos brands and product names are trademarks or registered trademarks of their

respective holders and are hereby recognized as such.

Attention:

This product is marked with this symbol. It means that used electrical and

electronic products should not be mixed with general household waste. There

is a separate collections system for these products.

Page is loading ...

Konig Electronic VID-TRANS220KN Owner's manual

This manual is also suitable for

Konig Electronic VID-TRANS220KN Owner's manual

in other languages

Related papers

Other documents