LG 42LD650 User guide

Category
LCD TVs
Type
User guide

This manual is also suitable for

www.lg.com
OWNER’S MANUAL
LCD TV
Please read this manual carefully before operating
your set and retain it for future reference.
42LD6***
47LD6***
55LD6***
ENGLISH
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or regis-
tered trademarks of HDMI Licensing LLC.
I
CONTENTS
EXTERNAL EQUIPMENT SETUP
Antenna Connection ............................................1
Connecting with a Component cable
..................2
Connecting with an HDMI cable
.........................3
Connecting with an HDMI to DVI cable
..............4
Usb setup
............................................................5
Connecting with AN RF Cable
............................5
Connecting with AN RCA cable
..........................6
Connecting with a D-sub 15 pin cable
................7
Headphone Setup
...............................................8
Digital audio out Setup
........................................9
External Equipment WIreless Connection
........10
Supported Display Resolution
...........................11
Screen Setup for PC mode
...............................12
Network setup
...................................................16
WATCHING TV / PROGRAMME CON-
TROL
Turning on the TV .............................................26
Initializing Setup
...............................................26
Programme Selection
........................................26
Volume Adjustment
...........................................26
Quick Menu
.......................................................27
On Screen Menus Selection and adjustment
...28
Auto programme tuning
...................................30
Manual programme Tuning
...............................31
Programme Edit
...............................................34
Booster
..............................................................37
Software Update
...............................................38
Picture/Sound test
.............................................40
Signal Test .........................................................41
Product/service information...............................42
Network Test
......................................................42
Simple Manual
..................................................43
Selecting the Programme List
...........................44
Input List
............................................................46
Input Label
........................................................47
SIMPLINK
..........................................................48
AV Mode
............................................................51
Initializing(Reset to original factory settings)
....52
NETCAST
Legal Notice ......................................................53
Netcast Menu
....................................................55
YOUTUBE
.........................................................56
AccuWeather
.....................................................58
picasa
................................................................59
TO USE A USB DEVICE
When connecting a USB device .......................60
DLNA
.................................................................62
Movie list
...........................................................66
Photo list
............................................................76
Music list
............................................................83
DivX Registration Code
.....................................89
Deactivation
.......................................................90
CONTENTS
ACC ESS ORIES
................................................
III
PREPARATION
Front Panel Controls
......................................... IV
Back Panel Information......................................V
Stand Installation...............................................VI
Back Cover for Wire Arrangement....................VI
Swivel Stand.....................................................VII
Not Using the desk-type stand.........................VII
Attaching the TV to a desk...............................VII
Kensington Security System...........................VIII
Careful installation advice...............................VIII
Desktop Pedestal Installation............................IX
Wall Mount:Horizontal Installation.....................IX
Remote Control Key Functions..........................X
GAME
Game .................................................................91
II
CONTENTS
CONTENTS
EPG(ELECTRONIC PROGRAMME
GUIDE)(IN DIGITAL MODE)
Switch on/off EPG .............................................93
Select a programme
..........................................93
Button Function in NOW/NEXT Guide Mode
...93
Button Function in 8 Day Guide Mode
.............94
Button Function in Date Change Mode
............95
Button Function in Extended Description Box
..95
Button Function in Remind Setting Mode ................96
Button Function in Schedule List Mode .............96
PICTURE CONTROL
Picture Size (Aspect Ratio) Control ..................97
Picture Wizard
...................................................99
Energy Saving
.................................................100
Preset Picture Settings
...................................101
Manual Picture Adjustment
.............................102
Picture Improvement Technology
....................103
Expert Picture Control
.....................................104
Picture Reset
...................................................107
Trumotion
........................................................108
Power Indicator
...............................................109
MHEG Guide
.................................................110
Mode Setting
...................................................111
Demo Mode
.....................................................112
SOUND & LANGUAGE CONTROL
Auto Volume L eveler ......................................113
Clear Voice II
...................................................114
Preset Sound Settings-Sound Mode
..............115
Sound Setting Adjustment -User Mode
..........116
Infinite Sound
..................................................116
Balance
...........................................................117
TV Speakers On/ Off Setup
............................118
DTV Audio Setting (in digital mode only)
........119
Selecting Digital Audio out
..............................120
Audio Reset
.....................................................121
Stereo/Dual Reception (In Analogue Mode Only) 122
NICAM Reception (In Analogue Mode Only) 123
Speaker Sound Output Selection ...................123
On-Screen Menu Language / Country Selection 124
Language Selection (In digital mode only) .....125
TIME SETTING
Clock Setup .....................................................127
Auto on/off time setting
...................................128
Sleep Timer setting
.........................................129
PARENTAL CONTROL / RATINGS
Set Password & Lock System.........................130
Block Programme
............................................131
External Input Blocking
...................................132
Key Lock..........................................................133
DIGITAL TELETEXT
Teletext within Digital Service .........................134
Teletext in Digital Service
................................134
APPENDIX
Troubleshooting ...............................................135
Maintenance
....................................................137
Product Specifications
...................................138
IR Codes
.........................................................139
External Control Device Setup
........................140
Open source software notice
..........................147
PREPARATION
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please
contact the dealer where you purchased the TV.
Image shown may differ from your TV.
Owner’s Manual Batteries
(AAA)
Remote Control
Polishing Cloth
Polishing cloth for
use on the screen.
This item is not included for all models.
* Lightly wipe any stains or
fingerprints on the surface
of the TV with the polish-
ing cloth.
Do not use excessive
force. This may cause
scratching or discoloura-
tion.
AV MODE INPUT
ENERGY
SAVING
BACK
EXIT
OK
MENU
Q.MENU
1
.,;@
2
abc
3
def
4
ghi
5
jkl
6
mno
7
pqrs
8
tuv
0
[
9
wxyz
LIST
Q.VIEW
GUID E
AD APP/
*
INFO
FAV
RATIO
MUTE
MARK
DELETE
CHAR/NUM
P
TV/
RAD
P
A
G
E
Power Cord
1-screw for stand fixing
Protection cover
Bolts for stand assembly
(M4x20)
x 8
(42LD6***)
Nero MediaHome
4 Essentials CD
III
PREPARATION
Wireless Media Box
Wireless LAN for
Broadband/
DLNA Adaptor
OUT
WIRELESS
CONTROL
AV1 AV2
COM
HDMI 1 HDMI 2 HDMI 3 HDMI 4
RGB
WIRELESS
Separate purchase
Wall Mounting Bracket
(42/47LD6***)
(55LD6***)
AW-47LG30M
AW-55LH40M
IV
PREPARATION
FRONT PANEL CONTROLS
Image shown may differ from your TV.
NOTE
TV can be placed in standby mode in order to reduce the power consumption.
The energy consumed during use can be significantly reduced if the level of
brightness of the picture is reduced, and this will reduce the overall running cost.
CAUTION
Do not drag the TV. The floor or the product may be damaged.
SPEAKER
Power/Standby Indicator
(Can be adjusted using the Power
Indicator in the OPTION menu.)
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
PROGRAMME
VOLUME
OK
MENU
INPUT
POWER
PREPARATION
V
PREPARATION
BACK PANEL INFORMATION
Image shown may differ from your TV.
Power Cord Socket
This TV operates on an AC power. The volt-
age is indicated on the Specifications page.
(p.138) Never attempt to operate the TV
on DC power.
1
LAN
Network connection for AccuWeather,
Picasa, YouTube, etc.
Also used for video, photo and music files on
a local network.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
RGB/DVI Audio Input
Connect the audio from a PC .
Component Input
Connect a component video/audio device to
these jacks.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
RGB IN Input
Connect the output from a PC.
WIRELESS Control
Connect the Wireless Ready Dongle to the
TV to control the external input devices con-
nected to Wireless Media Box wirelessly.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
Antenna Input
Connect antenna or cable to this jack.
USB Input
Connect USB storage device to this jack.
Headphone Socket
Plug the headphone into the headphone
socket.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
2
3
4
5
6
8
9
10
11
12
13
14
15
432
8
109
7
1
AV IN 2
L/
MONO
R
AUDIO
VIDEO
H/P
13
7
14
15
HDMI IN 3 USB IN 2USB IN 1
L/
MONO
R
AUDIO
VIDEO
AV IN 1
2 1
11
12
ANTENNA IN
CABLE IN
5
6
7
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
Cable Input
Connect cable signals to this jack.
PREPARATION
VI
PREPARATION
PREPARATION
BACK COVER FOR
WIRE ARRANGEMENT
Image shown may differ from your TV.
1
2
NOTE
Do not use the Cable Management Clip to lift
the TV.
- If the TV is dropped, you may be injured or the
TV may be damaged.
Connect the cables as necessary.
To connect additional equipment, see the
External Equipment Setup section.
Open the Cable Management Clip as
shown.
Cable Management Clip
Fit the Cable Management Clip as shown.
3
STAND INSTALLATION
Fix the 4 bolts securely using the holes in
the back of the TV.
Image shown may differ from your TV.
When assembling the desk type stand, check
whether the bolt is fully tightened. (If not tightened
fully, the product can tilt forward after the product
installation.) If you tighten the bolt with excessive
force, the bolt can deviate from abrasion of the
tightening part of the bolt.
4
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
Assemble the TV as shown.
1
3
Assemble the parts of the Stand Body with
the Stand Base of the TV.
2
Stand Body
Stand Base
VII
PREPARATION
SWIVEL STAND
Image shown may differ from your TV.
After installing the TV, you can adjust the TV set
manually to the left or right direction by 20
degrees to suit your viewing position.
ATTACHING THE TV TO A
DESK
(Only 42LD6
***
)
Desk
Stand
Image shown may differ from your TV.
The TV must be attached to desk so it cannot be
pulled in a forward/backward direction, potentially
causing injury or damaging the product. Use only
an attached screw.
WARNING
To prevent TV from falling over, the TV
should be securely attached to the floor/wall
per installation instructions. Tipping, shaking,
or rocking the machine may cause injury.
1-Screw ( provided as parts of the product)
Image shown may differ from your TV.
When installing the wall-mounted unit, use the
protection cover.
Insert the Protection Cover into the TV until
clicking sound.
NOT USING THE
DESK-TYPE STAND
Protection Cover
PREPARATION
VIII
PREPARATION
PREPARATION
This feature is not available for all models.
Image shown may differ from your TV.
KENSINGTON SECURITY
SYSTEM
CAREFUL INSTALLATION
ADVICE
You should purchase necessary components
to fix the TV safety and secure to the wall on
the market.
Position the TV close to the wall to avoid the
possibility of it falling when pushed.
The instructions shown below are a safer way
to set up the TV, by fixing it to the wall, avoid-
ing the possibility of it falling forwards if pulled.
This will prevent the TV from falling forward
and causing injury. This will also prevent the
TV from damage. Ensure that children do not
climb or hang from the TV.
3
Use the eye-bolts or TV brackets/bolts to fix the
product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then
bolts.)
* Insert the eye-bolts or TV brackets/bolts and
tighten them securely in the upper holes.
Secure the wall brackets with the bolts on the
wall. Match the height of the bracket that is
mounted on the wall.
Use a sturdy rope to tie the product for align-
ment. It is safer to tie the rope so it becomes
horizontal between the wall and the product.
2
2
1
1
The TV is equipped with a Kensington Security
System connector on the back panel. Connect
the Kensington Security System cable as shown
below.
For the detailed installation and use of the
Kensington Security System, refer to the user’s
guide provided with the Kensington Security
System.
For further information, contact http://www.kens-
ington.com, the internet homepage of the
Kensington
company. Kensington sells security systems for
expensive electronic equipment such as note-
book PCs and LCD projectors.
1
2
3
NOTE
When moving the TV undo the cords first.
Use a platform or cabinet strong and large
enough to support the size and weight of the TV.
To use the TV safely make sure that the height of
the bracket on the wall and on the TV is the
same.
NOTE
The Kensington Security System is an optional
accessory.
If the TV feels cold to the touch, there may be a
small “flicker” when it is turned on.
This is normal
, there is nothing wrong with TV.
Some minute dot defects may be visible on the
screen, appearing as tiny red, green, or blue
spots. However, they have no adverse effect on
the monitor's performance.
Avoid touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary distortio
n
effects on the screen.
IX
PREPARATION
The TV can be installed in various ways such as
on a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
Power
Supply
Circuit
breaker
EARTHING
Ensure that you connect the earth wire to prevent
possible electric shock. If grounding methods are
not possible, have a qualified electrician install a
separate circuit breaker.
Do not try to earth the TV by connecting it to tele-
phone wires, lightening rods or gas pipes.
WALL MOUNT: HORIZONTAL
INSTALLATION
We recommend the use of a LG Brand wall
mounting bracket when mounting the TV to a wall.
We recommend that you purchase a wall mount-
ing bracket which supports VESA standard.
LG recommends that wall mounting be per-
formed by a qualified professional installer.
DESKTOP PEDESTAL
INSTALLATION
10 cm
10 cm
10 cm
10 cm
Model
VESA
(A
*
B)
Standard
Screw
Quantity
42/47LD6
***
55LD6***
200 * 200
400 * 400
M6
M6
4
4
10 cm
NOTE
Should Install wall mount on a solid wall per-
pendicular to the floor.
Should use a special wall mount, if you want
to install it to ceiling or slanted wall.
The surface that wall mount is to be mount-
ed on should be of sufficient strength to sup-
port the weight of TV set; e.g. concrete, nat-
ural rock, brick and hollow block.
Installing screw type and length depends on
the wall mount used. Further information,
refer to the instructions included with the
mount.
LG is not liable for any accidents or damage
to property or TV due to incorrect installa-
tion:
- Where a non-compliant VESA wall mount
is used.
- Incorrect fastening of screws to surface
which may cause TV to fall and cause per-
sonal injury.
- Not following the recommended Installation
method.
10 cm
For adequate ventilation allow a clearance of 10
cm all around the TV.
10 cm
10 cm
10 cm
Image shown may differ from your TV.
PREPARATION
X
PREPARATION
PREPARATION
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
(POWER)
ENERGY
SAVING
AV MODE
INPUT
TV/RAD
Switches the TV on from standby or off to standby.
Adjust the Energy Saving mode of the TV.(
p.100)
It helps you select and set images and sounds
when connecting AV devices.(
p.51)
External input mode rotate in regular sequence.
Selects Radio, TV and DTV channel.
Selects a menu.
Select the desired NetCast menu source.
(
p.55)
(AccuWeather, Picasa, YouTube and etc.)
NetCast menu source can differ by country.
Select the desired quick menu source. (Aspect
Ratio, Clear Voice II , Picture Mode, Sound Mode,
Audio Language
, Sleep Timer, Skip Off/On, USB
Device).
(
p.27)
Allows you to navigate the on-screen menus and
adjust the system settings to your preference.
Accepts your selection or displays the current
mode.
Allows the user to move return one step in an inter-
active application, EPG or other user interaction
function.
Clears all on-screen displays and returns to TV
viewing from any menu.
MENU
NetCast
Q. MENU
THUMBSTICK
(Up/Down/Left/Right)
OK
BACK
EXIT
INFO i
Shows the present screen information.
GUIDE
Shows programme guide. (
p.92)
XI
PREPARATION
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
1
0 to 9 number
button
LIST
Q.VIEW
Selects a programme.
Selects numbered items in a menu.
Displays the programme table.
Returns to the previously viewed programme.
Selects a Character for NetCast menu.
A to Z Character
button
TELETEXT
SUBTITLE
These buttons are used for digital teletext.
For further details, see the Digital Teletext’ section.
Recalls your preferred subtitle in digital mode.
1
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu
appears at the screen.
Coloured
buttons
These buttons are used for Programme edit.
PREPARATION
DIGITAL
XII
PREPARATION
PREPARATION
Installing Batteries
Open the battery compartment cover on the back and install
the batteries matching correct polarity (+with +,-with -).
Install two 1.5 V AAA batteries. Do not mix old or used batter-
ies with new ones.
Close cover.
To remove the batteries, perform the installation actions in
reverse.
SIMPLINK /
MY MEDIA
Menu
control buttons
Controls SIMPLINK or MY MEDIA menu (Photo List,
Music List and Movie List).
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
VOLUME UP
/DOWN
MARK
FAV
CHAR/NUM
RATIO
DELETE
MUTE
Programme
UP/DOWN
PAGE UP/
DOWN
Adjusts the volume.
Select the input to apply the Picture Wizard
settings.
Check and un-check programmes in the USB
menu.
Displays the selected favourite programme.
Shifts the Character or Number for NetCast menu.
Selects your desired Aspect Ratio of picture.
Deletes the entered character when entering the
character on the screen keyboard.
Switches the sound on or off.
Selects a programme.
Move from one full set of screen information to the
next one.
1
EXTERNAL EQUIPMENT SETUP
CABLE IN
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Wall
Antenna
Socket
RF Coaxial Wire (75
)
Antenna
UHF
Signal
Amplifier
VHF
ANTENNA IN
CABLE IN
EXTERNAL EQUIPMENT SETUP
ANTENNA CONNECTION
For optimum picture quality, adjust antenna direction.
An antenna cable and converter are not supplied.
To prevent damage do not connect to the mains outlet until all connections are made between the
devices.
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier
to the antenna as shown above.
If signal needs to be split for two TVs, use an antenna signal splitter for connection.
2
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH A COMPONENT CABLE
To avoid damaging any equipment, never plug in any power cord until you have finished connecting
all equipment.
Image shown may differ from your TV.
This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do
receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as
shown below.
HDMI Audio Supported format : Dolby Digital, PCM.
DTS Audio format is not supported.
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Signal Component HDMI
480i/576i O X
480p/576p O O
720p/1080i O O
1080p
O
(50 Hz / 60 Hz only)
O
(24 Hz / 30 Hz /
50 Hz / 60 Hz)
Component ports on the TV Y PB PR
Video output ports
on DVD player
Y P
B PR
Y B-Y R-Y
Y Cb Cr
Y Pb Pr
1
Connect the video outputs
(
Y, PB, PR
)
of the
external equipment (digital set-top box, DVD,
etc.) to the COMPONENT IN VIDEO jacks on
the TV.
2
Connect the audio output of the external equip-
ment (digital set-top box, DVD, etc.) to the
COMPONENT IN AUDIO jacks on the TV.
3
Turn on the external equipment.
(
Refer to the external equipment's manual for
operating instructions.)
4
Select the Component1 input source using the
INPUT button on the remote control.
If connected to COMPONENT IN 2, select
Component2 input source.
L/
MONO
R
AUDIO
VIDEO
AV IN 1
WIRELESS
CONTROL
2
1
HDMI / DVI IN
3
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH AN HDMI CABLE
NOTE
The TV can receive video and audio signals simultaneously when
using an HDMI cable.
If the DVD does not support Auto HDMI, you must set the output reso-
lution appropriately.
Check that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3, flickering or no
screen display can result. Please use the latest cables that support at
least HDMI version 1.3.
1
Connect the HDMI output of the external equipment (digital set-
top box, DVD, etc.) to HDMI/DVI IN 1, HDMI/DVI IN 2
HDMI IN 3
or
jack on the TV.
2
Turn on the external equipment.
(Refer to the external equipment's manual for operating
instructions.)
3
Select HDMI1, HDMI2 HDMI3 or
input source using the
INPUT
button on the remote control.
EXTERNAL EQUIPMENT SETUP
1
2
1
HDMI / DVI IN
4
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH AN HDMI TO DVI CABLE
1
Connect the digital set-top box or the DVI out-
put of the PC to
jack on the TV.
2
Connect the audio output of the digital set-top
box or the PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV.
3
Turn on the digital set-top box or the PC and
the TV.
(
Refer to the digital set-top box or the PC
manual for operating instructions.)
4
Select
input source using the INPUT
button on
the remote control.
HDMI/DVI IN 1 or HDMI/DVI IN 2
HDMI/DVI IN 1 or HDMI/DVI IN 2
ANTENNA IN
CABLE IN
1 2
or
2
1
HDMI / DVI IN
L/MONO
R
AUDIO
VIDEO
AV IN 1
2 1
WIRELESS
CONTROL
EXTERNAL EQUIPMENT SETUP
USB SETUP
1
Connect the USB device to the USB IN 1 or
USB IN 2 jack on the TV.
2
After connecting the USB IN 1 or USB IN 2
jack, you use the USB function.
CONNECTING WITH AN RF CABLE
To avoid picture noise (interference), allow adequate distance between the VCR and TV.
1
Connect the ANT OUT socket of the VCR to
the ANTENNA IN socket on the TV.
2
Connect the antenna cable to the ANT IN
socket of the VCR.
3
Press the PLAY button on the VCR and match
the appropriate channel between the TV and
VCR for viewing.
5
EXTERNAL EQUIPMENT SETUP
1
or
Wall Jack
Antenna
1
2
ANTENNA IN
CONNECTING WITH AN RCA CABLE
NOTE
If you have a mono VCR, connect the audio cable from
the VCR to the AUDIO L/MONO jack of the TV.
1
Connect the AUDIO/VIDEO jacks between TV
and VCR or external equipment. Match the
jack colours (Video = yellow, Audio Left =
white, and Audio Right = red)
2
Insert a video tape into the VCR and press
PLAY on the VCR.
(
Refer to the VCR owner’s
manual.
)
Or, Operate the corresponding external equip-
ment.
(Refer to external equipment operating guide.)
3
Select AV1 input source using the INPUT but-
ton on the remote control.
If connected to AV IN 2, select AV2 input
source.
1
Camcorder
Video Game Set
or
2
1
AV IN 1
2 1
EXTERNAL EQUIPMENT SETUP
6
EXTERNAL EQUIPMENT SETUP
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177

LG 42LD650 User guide

Category
LCD TVs
Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI