Beko DFN16210 Owner's manual

Brand: Beko

Model: DFN16210

Category: Dishwashers

Type: Owner's manual

User’s Manual

Dishwasher

DFN16210W

User’s Manual

Dishwasher

User’s Manual

Explanation of symbols

Throughout ths User Manual the followng symbols are used:

Important nformaton or useful

hnts about usage.

Warnng for hazardous

stuatons wth regard to lfe and

property.

Warnng for electrc shock.

Packagng materals of the

product are manufactured

from recyclable materals n

accordance wth our Natonal

Envronment Regulatons.

Do not dspose of the packagng materals together wth the domestc or other

wastes. Take them to the packagng materal collecton ponts desgnated by the local

authortes.

Please read this user manual first!

Dear Customer,

We hope that you get the best results from your product whch has been manufactured

wth hgh qualty and state-of-the-art technology. Therefore, please read ths entre

user manual and all other accompanyng documents carefully before usng the product

and keep t as a reference for future use. If you handover the product to someone else,

gve the user manual as well. Follow all warnngs and nformaton n the user manual.

Remember that ths user manual s also applcable for several other models. Dfferences

between models wll be dentfed n the manual.

CONTENTS

1 INSTRUCTIONS FOR SAFETY

AND ENVIRONMENT 4

General safety .......................................4

Intended use ..........................................4

Chldren’s safety ...................................5

Dsposng of packagng materal ........ 5

Transportaton of the product ...........5

Complance wth WEEE Drectve and

Dsposng of the Waste Product ......... 6

Complance wth RoHS Drectve........6

Package nformaton ............................6

2 DİSHWASHER 7

Overvew ................................................7

Condensng Dryng System .................8

Techncal specfcatons ......................8

3 INSTALLATİON 9

Approprate nstallaton locaton .......9

Connectng water supply ....................9

Connecton to the dran .......................9

Adjustng the feet ............................. 10

Electrcal connecton ......................... 10

Ths applance must be earthed ...... 10

Fttng a derent plug ....................... 11

Intal use ..............................................11

4 PREPARATİON 12

Tps for energy savng .......................12

Water softenng system ....................12

Adjustng the water softenng

system ..................................................12

Addng salt ...........................................12

Water hardness & regeneraton

settngs.................................................13

Detergent .............................................15

Addng detergent ...............................15

Tablet detergents .............................. 16

Rnse ad ...............................................17

Upper basket heght adjustable

rack ....................................................... 18

Cutlery basket .................................... 20

Adjustng the heght of the upper

basket .................................................. 20

Collapsable upper basket tnes ........21

Collapsable lower basket tnes .........21

5 OPERATİNG THE PRODUCT 22

Keys ...................................................... 23

Preparng the machne ..................... 23

Programme selecton ........................ 23

Auxlary functons ............................ 25

Schedulng the washng tme .......... 26

Startng the programme ....................27

Cancellng the programme ................27

Salt ndcator ( ) ...............................27

Rnse Ad ndcator ( ) ..................... 28

End of programme ............................. 28

Water cut-o warnng ...................... 28

Overowng warnng ........................ 28

6 MAİNTENANCE AND

CLEANİNG 29

Cleanng the outer surface of the

product ................................................ 29

Cleanng the nteror of the machne 29

Cleanng the flters ............................ 29

Cleanng the hose flter .................... 30

Cleanng the mpellers ...................... 30

Lower mpeller ................................... 30

Upper mpeller

.....................................31

7 TROUBLESHOOTİNG 32

8 GUARANTEE 37

Dishwasher / User’s Manual

/38 EN

InstructIons for safety and envIronment

Ths secton contans safety

nstructons that wll help to

gve protecton from rsk of

personal njury or property

damage. Falure to follow

these nstructons shall vod all

warrantes.

General safety

• Never place the product

on a carpet-covered floor;

otherwse, lack of arflow

beneath the product wll

cause electrcal parts to

overheat. Ths wll cause

problems wth your product.

• Do not operate the product

f the power cable / plug s

damaged! Call the Authorsed

Servce Agent.

• Connect the product to a

grounded outlet protected

by a fuse complyng wth

the values n the “Techncal

specfcatons” table. Do

not neglect to have the

groundng nstallaton made

by a qualfed electrcan.

Our company shall not be

lable for any damages that

wll arse when the product

s used wthout groundng

n accordance wth the local

regulatons.

• The water supply and

dranng hoses must be

securely fastened and reman

undamaged.

• Unplug the product when not

n use.

• Never wash the product by

spreadng or pourng water

onto t! There s the rsk of

electrc shock!

• Never touch the plug wth

wet hands! Never unplug by

pullng on the cable, always

pull out by grabbng the plug.

• The product must

be unplugged durng

nstallaton, mantenance,

cleanng and reparng

procedures.

• Always have the repar

procedures carred out by the

Authorsed Servce Agent.

Manufacturer shall not be

held lable for damages that

may arse from procedures

carred out by unauthorsed

persons.

• Never use chemcal solvents

n the product. They brng

forth the rsk of exploson.

• When you pull the upper

and lower baskets out

completely, the door of the

product wll bear all the

weght of the baskets. Do not

put other loads on the door;

otherwse, the product may

tlt.

• Never leave the door of

the product open apart

from loadng and unloadng

procedures.

• Do not to open the door

of the product when t s

runnng unless necessary.

Be careful for the rush of

hot steam when you need to

open the door.

Intended use

• Ths product has been

desgned for domestc use.

Dishwasher / User’s Manual

5 / 38

InstructIons for safety and envIronment

• It must be used to do the

domestc type dshes only.

• Ths applance s ntended

to be used n household and

smlar applcatons such as:

- Staff ktchen areas n shops,

offces and other workng

envronments.

• Only dshwasher safe

detergents, rnse ads and

addtves must be used.

• The manufacturer waves

any responsblty arsen

from ncorrect usage or

transportaton.

• Ths applance can be used by

chldren aged from 8 years

and above and persons wth

reduced physcal,sensory

or mental capabltes or

lack of experence and

knowledge f they have

been gven supervson or

nstructon concernng use

of the applance n a safe

way and understand the

hazards nvolved. Chldren

shall not play wth the

applance. Cleanng and user

mantenance shall not be

made by chldren wthout

supervson.

Chldren’s safety

• Electrcal products are

dangerous for the chldren.

Keep chldren away from the

product when t s n use. Do

not let them to tamper wth

the product.

• Do not forget to close the

door of the product when

leavng the room where t s

located.

• Store all detergents and

addtves n a safe place

away from the reach of the

chldren.

Dsposng of packagng

materal

Packagng materals are

dangerous to chldren. Keep

packagng materals n a safe

place away from reach of the

chldren.

Packagng materals of the

product are manufactured from

recyclable materals. Dspose

of them properly and sort n

accordance wth recycled waste

nstructons. Do not dspose

of them wth normal domestc

waste.

Transportaton of the

product

If you need to move the

product, do t n uprght

poston and hold from

the rear sde. Tltng the

product onto ts front

sde may cause the

electronc parts n t get

wet and damaged.

1. Unplug the product before

transportng t.

2. Remove water dranage and

water supply connectons.

3. Dran the remanng water n

the product completely.

Dishwasher / User’s Manual

/38 EN

InstructIons for safety and envIronment

Complance wth WEEE

Drectve and Dsposng

of the Waste Product

Ths product comples wth

EU WEEE Drectve

(2012/19/EU). Ths product

bears a classfcaton

symbol for waste electrcal and

electronc equpment (WEEE).

Ths product has been

manufactured wth hgh qualty

parts and materals whch can be

reused and are sutable for

recyclng. Do not dspose of the

waste product wth normal

domestc and other wastes at the

end of ts servce lfe. Take t to

the collecton center for the

recyclng of electrcal and

electronc equpment. Please

consult your local authortes to

learn about these collecton

centers.

Complance wth RoHS

Drectve

The product you have purchased

comples wth EU RoHS Drectve

(2011/65/EU). It does not contan

harmful and prohbted materals

specfed n the Drectve.

Package nformaton

Packagng materals of the

product are manufactured

from recyclable materals n

accordance wth our Natonal

Envronment Regulatons. Do

not dspose of the packagng

materals together wth the

domestc or other wastes. Take

them to the packagng materal

collecton ponts desgnated by

the local authortes.

Dishwasher / User’s Manual

7 / 38

Dshwasher

Overvew

Top Cover

Upper mpeller

Lower basket

Lower mpeller

Flters

Ratng Label

Control panel

Door

Detergent dspenser

10.

Cutlery basket

11.

Salt reservor ld

12.

Upper basket ral

13.

Upper basket

14.

Condensng Dryng System

Dishwasher / User’s Manual

/38 EN

Dishwasher

Techncal specfcatons

Compliance to standards and test data / EC declaration of conformity

Ths product comples wth the followng EU drectves;

Development, producton and sales stages of ths product comply wth the safety

rules ncluded n all pertanng European Communty regulatons.

2006/95/EC, 2004/108/EC, 93/68/EC, IEC 60436/DIN 44990, EN 50242

Power nput 220-240 V, 50 Hz (see ratng label)

Total power consumpton 1800-2100 W (see ratng label)

Heater power consumpton 1800 W (see ratng label)

Total current (depends on the model) 10 A (see ratng label)

Dran pump power consumpton 30 W (see ratng label)

Water pressure 0.3 –10 bar (= 3 – 100 N/cm = 0.01-1.0

Mpa)

Techncal specfcatons may be changed wthout pror notce to mprove the

qualty of the product.

Fgures n ths manual are schematc and may not match the product exactly.

Values stated on the markngs of the product or n the prnted documents

accompanyng the product are obtaned n the laboratory on bass of the

relevant standards. Dependng on operatonal and envronmental condtons of

the product, these values may vary.

Note for test institutions:

Data requred for performance tests shall be provded upon request. Requests can be

e-maled to the followng address:

[email protected]

Do not forget to provde the code, stock and seral numbers of the product to be tested n

your request e-mal along wth your contact nformaton. Code, stock and seral numbers of

the product may be found on the type label attached to the sde wall of the door.

Condensng Dryng System

Condensng dryng system ensures effcent dryng of your dshes.

Dishwasher / User’s Manual

9 / 38

Installaton

To make the product ready for use,

make sure that the electrcty, tap water

supply and water dranage systems are

approprate before callng the Authorsed

Servce Agent. If they are not, call a

qualfed techncan and plumber to have

any necessary arrangements carred out.

Preparaton of the locaton

and electrcal, tap water and

waste water nstallatons at the

place of nstallaton s under

customer's responsblty.

Manufacturer shall not be held

responsble for damages arsng

from processes carred out by

unauthorsed persons.

Pror to nstallaton, vsually

check f the product has any

defects on t. If so, do not have

t nstalled. Damaged products

cause rsks for your safety.

Make sure that the water nlet

and dscharge hoses are not

folded, pnched or crushed

whle pushng the product nto

ts place after nstallaton or

cleanng procedures.

When placng the product, pay attenton

not to damage the floor, walls, ppng, etc.

Do not hold the product from ts door or

panel to move t.

Approprate nstallaton

locaton

• Place the product on a sold and flat

floor that has suffcent load carryng

capacty! The product must be

nstalled on a flat surface n order for

the door to be closed comfortably and

securely.

• Do not nstall the product at places

where temperature may fall below

0ºC.

• Place the product on a rgd floor. Do

not place t on a long ple rug or smlar

surfaces.

Ensure the power cable does

not get trapped under the

product.

• Make sure that you select a locaton

that wll allow you to load and unload

the dshes n a fast and comfortable

manner.

• Install the product n a place close

to the tap and the dran. Select the

nstallaton locaton by consderng

that t wll not be changed after the

connectons are made.

Connectng water supply

• Do not use old or used water nlet

hose on the new product. Use the new

water nlet hose suppled wth the

product.

• Connect the water nlet hose drectly

to the water tap. Pressure comng

from the tap should be mnmum 0.3

and maxmum 10 bars. If the water

pressure exceeds 10 bars, a pressure

relef valve should be nstalled n

between.

• Open the tap completely after makng

the connectons to check for water

leaks.

For your safety, close the water

nlet tap completely after the

washng programme s over.

Connecton to the dran

Water dscharge hose can drectly be

connected to the dran hole or snk’s

Dishwasher / User’s Manual

/38 EN

Installation

dranage. The length of ths connecton

must be mn. 50 cm and max. 100 cm from

the floor. A dscharge hose longer than 4

meters wll cause washng performance

to be affected.Attach the water dscharge

hose to the dranppe wthout bendng

t. Tghtly fx the water dscharge hose

to the dranppe n order to prevent any

dslocaton of the water dscharge hose

durng operaton of the product.

min

300

min

120

max 1000

min 500

the frequency shown n the ratng label

corresponds to your electrcty supply.

We recommend that ths applance be

connected to the mans supply va a

sutable swtched and fused socket n a

readly accessble poston.

If the supply cord or the mans lead s

damaged please do not replace t yourself.

The supply cord or the mans lead must be

replaced by a Authorsed Servce Agent or a

smlarly qualfed person.

Ths applance must

be earthed

If the ftted moulded plug s not

sutable for your socket, then

the plug should be cut off and

an approprate plug ftted.

Destroy the old plug, whch s

cut off as a plug wth a bared

cord could cause a shock

hazard f nserted nto a socket

elsewhere n the house.

The moulded plug on ths

applance ncorporates a 13A

fuse. Should the fuse need to

be replaced an ASTA approved

BS1362 fuse of the same ratng

must be used. Do not forget

to reft the fuse cover. In the

event of losng the fuse cover,

the plug must not be used

untl a replacement fuse cover

has been ftted. Colour of the

replacement fuse cover must

be the same colour as that

vsble on the pn face of the

plug. Fuse covers are avalable

from any good electrcal store.

Dranppe must be connected

to the foul water system and t

should not be connected to any

surface water dran.

Adjustng the feet

If the door of the product cannot be closed

properly or f the product wobbles when

you push t slghtly, then you need to adjust

the feet of the product. Adjust the feet of

the product as llustrated n the relevant

secton.

Electrcal connecton

Before you nsert the plug nto the wall

socket make sure that the voltage and

Dishwasher / User’s Manual

11 / 38

Installation

Intal use

Before startng to use the product, make

sure that all preparatons are made n

accordance wth the nstructons n

sectons “Important safety nstructons”

and “Installaton”.

• Before usng the product, fll the salt

reservor wth 1 ltre of water, add salt

(see next page) and str to dssolve.

Run the Dshwasher wthout dshes

on a short programme wth a small

amount of detergent.

There mght be a small amount

of water left n the product

after factory qualty control

tests. Ths causes no harm to

the product.

Fttng a derent plug

As the colours of the wres n the mans

lead of ths applance may not correspond

wth the coloured markngs dentfyng the

termnals on your plug, proceed as follows:

1. Connect the green - yellow or green

(earth) wre to the termnal n the plug

marked ‘E’ or wth the symbol or

coloured green and yellow or green.

2. Connect the blue (neutral) wre to

the termnal n the plug marked ‘N’ or

coloured black.

3. Connect the brown (lve) wre to the

termnal n the plug marked ‘L’ or

coloured red.















Wth the alternatve plugs a 13A fuse must

be ftted ether n the plug or adaptor or

n the man fuse box. If n doubt contact a

qualfed electrcan.

Dishwasher / User’s Manual

/38 EN

Preparaton

Tps for energy savng

Followng nformaton wll help you use the

product n an ecologcal and energy-effcent

manner.

Wpe away any coarse food remnants on

the dshes before puttng them n the

product. Operate the product after fllng t

completely. When selectng a programme,

consder the table of “Programme data and

average consumpton values”.

Do not put more detergent than suggested

on the detergent package.

Water softenng system

Your dshwasher requres soft

water. If the hardness of the

water s above 6°dH, the water

must be softened and descaled.

Otherwse, ons that create

the hardness wll accumulate

on the surfaces of the dshes

and may adversely affect the

washng, shnng and dryng

performances of the product.

The product s equpped wth a water

softenng system whch reduces the

hardness of ncomng water. Ths system

softens the supply water that enters nto the

product to a level that wll allow washng the

dshes wth the requred qualty.

Adjustng the water

softenng system

Washng performance wll ncrease when

water softenng system s adjusted properly.

Adjust the new water hardness level

accordng to the Water hardness level

nstructon n ths booklet.

Addng salt

Water softenng system needs to be

regenerated n order that the product

operates wth the same performance

contnuously. Dshwasher salt s used for

ths purpose.

Use only specal softenng salts

produced partcularly for the

dshwashers n your machne.

We recommend usng granular

or powder softenng salts. Do

not use salts that are nsoluble

n water such as table salt or

common salt. Performance of

water softenng system may

get worse n tme.

Salt reservor wll fll wth water

when you start the product.

Therefore, add the softenng

salt before startng the

machne.

1. Frst take the lower basket out to add

softenng salt.

Dishwasher / User’s Manual

13 / 38

Preparation

4. Replace the ld and tghten t securely

when the reservor s full.

5. If you wll not start a washng programme

mmedately after addng the salt, run the

machne empty n the shortest programme

to dssolve and wash away the scattered

salt n the machne.

2. Turn the salt reservor ld counter

clockwse to open t (A, B).

Salt reservor wll fll wth water

when you start the product.

Therefore, add the softenng

salt before startng the

machne.

Before ntal use, fll the water

softenng system wth 1 ltre of

water (C).

3. Fll the salt reservor wth salt by usng

salt funnel (D). To speed up dssoluton rate

of salt n water, str t wth a spoon.

You can put about 2 kg of

Dshwasher salt nto the salt

reservor.

Water hardness &

regeneraton settngs

The dshwasher requres lme free water.

Hard water leaves watermarks on your

dshes. Your dshwasher has a specal

water softenng system to remove the

hardness of the tap water. Settng ths

system correctly wll ncrease the washng

effectveness.

To fnd out the hardness level of water n

your area, contact your local Water Board or

Determne water hardness level by the help

of test strp provded.

If you move to a different location,

the level of water hardness will

possibly be different. It is essential to

reset the water hardness in order to

obtain optimum washing efficiency.

Dishwasher / User’s Manual

/38 EN

Preparation

Test Strip

Let the water

flow from your

tap for 1 minute.

Remove the

test strip from

its packing.

Fill a glass with

tap water and

dip the test strip

into water for 1

second.

Take the test strip

out of the water and

shake it.

Hold for

1 minute.

Set the water hardness level of your dishwasher

according to the result shown by the test strip.













 

No Lime

Very low lime content

Low lime content

Medium lime content

High lime content

Very High lime content

Level 1

Level 2

Level 3

Level 4

Level 5

Level 6

To Adjust the Water Hardness

1. After turnng on the machne, press and hold Tme Delay and Programme keys

smultaneously for 3 seconds to enter the settngs menu.

2. Press the programme key untl the Rnse Ad con starts to flash. Current regeneraton

stage s dsplayed on the programme ndcator.

3. Usng Tme Delay key, adjust water hardness level accordng to the hardness of the

supply water. See “Water hardness level adjustment table” for correct settng.

4. Press On / Off key to save the settng.

Water Hardness Level Adjustment Table

Hardness

Level

English

Water

Hardness

°dE

German

Water

Hardness

°dH

French

Water

Hardness

°dF*

Position of

Regeneration

Adjustment

Switch**

Water Hardness Level Indicator

Level

0-5 0-4 0-8