WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
MODEL H6330
2
1
⁄4 GALLON PAINT TANK
INSTRUCTION MANUAL
4HISMANUALPROVIDESCRITICALSAFETYINSTRUCTIONSONTHEPROPERSETUP
OPERATIONMAINTENANCEANDSERVICEOFTHISMACHINEEQUIPMENT
&AILURETOREADUNDERSTANDANDFOLLOWTHEINSTRUCTIONSGIVENINTHIS
MANUALMAYRESULTINSERIOUSPERSONALINJURYINCLUDINGAMPUTATION
ELECTROCUTIONORDEATH
4HEOWNEROFTHISMACHINEEQUIPMENTISSOLELYRESPONSIBLEFORITS
SAFEUSE4HISRESPONSIBILITYINCLUDESBUTISNOTLIMITEDTOPROPER
INSTALLATIONINASAFEENVIRONMENTPERSONNELTRAININGANDUSAGE
AUTHORIZATIONPROPERINSPECTIONANDMAINTENANCEMANUALAVAILABILITY
ANDCOMPREHENSIONAPPLICATIONOFSAFETYDEVICESBLADECUTTERINTEG
RITYANDTHEUSAGEOFPERSONALPROTECTIVEEQUIPMENT
4HEMANUFACTURERWILLNOTBEHELDLIABLEFORINJURYORPROPERTYDAMAGE
FROMNEGLIGENCEIMPROPERTRAININGMACHINEMODIFICATIONSORMISUSE
3OMEDUSTCREATEDBYPOWERSANDINGSAWINGGRINDINGDRILLINGAND
OTHERCONSTRUCTIONACTIVITIESCONTAINSCHEMICALSKNOWNTOTHE3TATE
OF#ALIFORNIATOCAUSECANCERBIRTHDEFECTSOROTHERREPRODUCTIVE
HARM3OMEEXAMPLESOFTHESECHEMICALSARE
s ,EADFROMLEADBASEDPAINTS
s #RYSTALLINESILICAFROMBRICKSCEMENTANDOTHERMASONRYPRODUCTS
s !RSENICANDCHROMIUMFROMCHEMICALLYTREATEDLUMBER
9OURRISKFROMTHESEEXPOSURESVARIESDEPENDINGONHOWOFTENYOU
DOTHISTYPEOFWORK4OREDUCEYOUREXPOSURETOTHESECHEMICALS
7ORKINAWELLVENTILATEDAREAANDWORKWITHAPPROVEDSAFETYEQUIP
MENTSUCHASTHOSEDUSTMASKSTHATARESPECIALLYDESIGNEDTOFILTER
OUTMICROSCOPICPARTICLES
Safety Instructions for Pneumatic Tools
1. READ THIS MANUAL.
2. WEAR EYE PROTECTION.
3. WEAR A RESPIRATOR.
For Your Own Safety Read Instruction Manual
Before Operating This Equipment
The purpose of safety symbols is to attract your attention to possible hazardous
conditions. This manual uses a series of symbols and signal words which
are intended to convey the level of importance of the safety messages. The
progression of symbols is described below. Remember that safety messages by
themselves do not eliminate danger and are not a substitute for proper accident
prevention measures.
Indicates a potentially hazardous situation which, if
not avoided, MAY result in minor or moderate injury.
It may also be used to alert against unsafe practices.
Indicates a potentially hazardous situation which, if
not avoided, COULD result in death or serious injury.
Indicates an imminently hazardous situation which,
if not avoided, WILL result in death or serious injury.
This symbol is used to alert the user to useful
information about proper operation of the equipment.
SAFETY
NOTICE
4. WEAR HEARING PROTECTION.
5. MAINTAIN SAFETY GUARDS.
6. KEEP CHILDREN AWAY.
7. AVOID ENTANGLEMENTS.
8. USE CORRECT AIR PRESSURE.
9. DISCONNECT AIR PRESSURE
10. SECURE TOOLING.
11. SHARP SURFACES.
12. REMOVE ADJUSTING KEYS AND
WRENCHES AFTER USE.
13. AVOID FLAMMABLES
14. SECURE WORK.
15. MAINTAIN TOOLS WITH CARE.
16. DO NOT FORCE TOOL.
17. CHECK FOR DAMAGED PARTS
BEFORE USING.
18. USE GOOD LIGHTING.
19. AVOID UNINTENTIONAL OPERA-
TION.
20. USE THE RECOMMENDED
ACCESSORIES.
21. NEVER ALLOW UNTRAINED
USERS TO USE THIS TOOL WHILE
UNSUPERVISED.
22. IF YOU ARE UNSURE OF THE
INTENDED OPERATION, STOP
USING TOOL.
23. BE AWARE OF HOSE LOCATION.
24. DO NOT USE UNDER THE
INFLUENCE OF DRUGS OR
ALCOHOL, OR WHEN TIRED.
No list of safety guidelines is complete, because every work environment is
different. Always consider safety first and use common sense. Failure to use this
tool with caution and respect could result in serious personal injury.
1. READ THIS MANUAL.
2. DESIGN MODIFICATIONS.
3. CLEANING AND MAINTENANCE.
4 REACTIVE CHEMICALS.
5. SAFETY VALVE MODIFICATIONS.
Additional Safety Instructions for Paint Tanks
6. REMOVING LID.
7. LID CLAMPS.
8. NON-STANDARD COMPONENTS.
9. ATTACHMENTS.
INTRODUCTION
Specifications
Foreword
Paint Tank
Read the manual before operation.
Become familiar with this paint
tank, its safety instructions, and its
operation before beginning any work.
Serious personal injury may result if
safety or operational information is
not understood or followed.
H6330 Inventory (Figure 1) ............... Qty
A.
B.
C.
D.
Inventory
SETUP
Figure 1.
immedi-
ately call Customer Service at (570) 546-
9663for advice.
Otherwise, filing a freight claim
can be difficult.
Unpacking
Tank Assembly
To assemble the paint tank:
1.
2.
Figure 2
3.
Figure 2
4.
5.
6.
7.
Figure
3
Figure 3
Figure 2.
Fj^X`
8dccZXidg
IVc`
GZ\jaVidg
Fj^X`
8djeaZg
6^g
Hjeean
=dhZ
Fj^X`
8djeaZg
Fj^X`
8dccZXidg
;^aiZg
GZ\jaVidg
6^g
8dbegZhhdg
HegVn
<jc
6idb^oVi^dc
6^g=dhZ
BViZg^Va=dhZ
GZ\jaVidg
6idb^oVi^dc
6^g=dhZ
Figure 3.
OPERATIONS
Do not exceed the 50 PSI maximum
operating pressure on your paint tank.
Exceeding the maximum pressure
may cause the tank to explode,
causing serious personal injury.
EXPLOSION HAZARD! DO NOT
smoke or have any source of flame
or spark near spraying. Vapors will
explode if ignited.
RESPIRATORY HAZARD! Alw ays u se
a NIOSH approved respirator when
using spray equipment. Failure to
protect your lungs can lead to respi-
ratory illness and nervous system
damage. Spraying some paints and
varnishes may require a supplied air
respirator system.
TOXIC FUMES! Always use an
approved spray booth or well ven-
tilated area when spraying. NEVER
spray in an confined space where
toxic fumes and flammable vapors
can accumulate to deadly levels.
Internal Mix Guns:
External Mix Guns:
Tank Regulator
This paint tank is not designed for
use with highly abrasive, corrosive,
or rust inducing materials. If such
materials are used, frequently and
thoroughly clean all components to
reduce the need to replace parts.
@AF;57
Read the manual before operation.
Become familiar with this tool, its
safety instructions, and its operation
before beginning any work. Serious
personal injury may result if safety
or operational information is not
understood or followed.
Like all tools there is potential danger
when operating this tool. Accidents
are frequently caused by lack of
familiarity or failure to pay attention.
If normal safety precautions are
overlooked or ignored, serious
personal injury may occur.
3.
4.
5.
OFF
To use your paint tank:
1.
2.
Tank Setup
6.
7.
Figure 4.
CLEANING AND LUBRICATION
3.
4.
Figure 4
5.
ON
6.
7.
8.
Note:Check with local laws regarding
this practice and proper solvent dis-
posal. If you are spraying on a regular
basis, spraying solvents into the air
may be illegal. A cabinet style spray
gun cleaner may be required.
9.
10.
To clean your paint tank:
1.
EXPLOSION HAZARD! Removing the
lid while the tank is pressurized could
result in lid being thrown violently
from tank, causing serious personal
injury. Always shut off air pressure
at source and bleed off all pressure
in tank before removing lid.
2.
Figure 4
Cleaning the Tank
Figure 5.
Tank Troubleshooting
Symptom Possible Cause Solution
OFF
ON
Page 7
H6330 PAINT TANK
&
'
(
)
*
+
,
-
.
&%
&&
&'
&(
&)
&*
&+
&,
&-
&.
'%
'&
''
'(
)
)
READ and UNDERSTAND
instruction manual to
avoid serious injury. If a
manual is not available,
DO NOT use machine. Go
to www.grizzly.com or
call (800) 523-4777.
WARNING!
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when using
this equipment.
H6330 2
1
⁄
4
GAL. PAINT TANK
TO REDUCE RISK OF SERIOUS INJURY
WHEN USING THIS EQUIPMENT:
1. Do not exceed 50 PSI.
2. Do not use attachments with lower pressure
ratings than the adjusted tank pressure.
3. Do not modify tank or substitute inferior
components.
4. Do not tamper with safety valve.
5. Do not remove lid while tank is under
pressure. Always turn off air pressure at the
source and release air pressure from the tank
before removing the lid.
6. Do not use reactive chemicals in the tank
such as acids, caustic solutions or
halogenated hydrocarbon solvents. Damage
to the gasket and safety valve seal could
occur.
7. Do not overtighten clamps. Use only hand
pressure to tighten clamps.
Capacity: 2 ⁄ Gallons
Gun Type: Pressure Feed (HVLP or
Conventional)
Maximum Pressure: 50 PSI
Operating Pressure: 25–30 PSI
Tank Construction: Galvanized Steel
Weight: 21 lbs.
Max. Pressure: 50 PSI
REF PART # DESCRIPTION REF PART # DESCRIPTION
1 PH8225018 TANK SHELL ASSEMBLY 13 PH8225006 WING SCREW M10-1.5 X 40
2 PH8225017 LID GASKET 14 PH8225005 LID CLAMP
3 PH8225016 LID ASSEMBLY 15 PH8225004 COTTER PIN 2 X 30
4 PH8225015 ADAPTER 16 PH8225003 CLEVIS PIN 3/8 X 1-1/4
5 PH8225014 GAUGE 17 PH8225002 FLUID TUBE
6 PH8225013 REGULATOR 18 PH8225001 FLUID OUTLET ADAPTER
7 PH8225012 SWIVEL ADAPTOR 19 PH6330019 MACHINE ID LABEL FOR H6330
8 PH8225011 T-BRANCH 20 PLABEL-12A READ MANUAL LABEL-VERT.
9 PH8225010 SAFETY VALVE 21 PLABEL-37 RESPIRATOR/GLASSES LABEL
10 PH8225009 HANDLE M8-1.25 22 PH8225026 MAXIMUM PRESSURE LABEL
11 PN03M HEX NUT M8-1.25 23 PH8225027 DEPRESSURIZE LABEL
12 PH8225007 FLUID OUTLET
1 year
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail:
Web Site: http://www.grizzly.com
WARRANTY
WARRANTY CARD
The following information is given on a voluntary basis. It will be used for marketing purposes to
help us develop better products and services. All information is strictly confidential.
1.
2.
3.
4.
5.
6.
7.
8.
9.
We never use names more than 3 times.
10.
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
FOLD ALONG DOTTED LINE
GRIZZLY INDUSTRIAL, INC.
P.O. BOX 2069
BELLINGHAM, WA 98227-2069
TAPE ALONG EDGES--PLEASE DO NOT STAPLE
Name________________________________
Street________________________________
City______________State______Zip_______
Send a Grizzly Catalog to a friend:
Place
Stamp
Here
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
Grizzly H6330 User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Grizzly H6330 Owner's manual
-
Grizzly Paint Sprayer H8226 User manual
-
-
-
-
Grizzly Paint Sprayer H8116 User manual
-
-
-
-
