Davey KRBCABS2-20 User guide

Type
User guide

This manual is also suitable for

AUSTRALIA
Customer Service Centre
6 Lakeview Drive,
Scoresby, Australia 3179
Ph: 1300 232 839
Fax: 1300 369 119
Website: davey.com.au
Davey Water Products Pty Ltd
Member of the GUD Group
ABN 18 066 327 517
NEW ZEALAND
Customer Service Centre
7 Rockridge Avenue,
Penrose, Auckland 1061
Ph: 0800 654 333
Fax: 0800 654 334
Website: daveynz.co.nz
® Davey is a registered trademark of Davey Water Products Pty Ltd. © Davey Water Products Pty Ltd 2016.
TO TOILETS
AND/OR
LAUNDRY
(do not mix/cross-connect
with mains water supply)
MAINS
WATER SUPPLY
3/4" BSP M
RAINWATER
SUPPLY
from discharge
of auto submersible
rainwater pump
Power to pump via
3 pin socket - plug the
rainwater pump in here.
Incoming power
to RainBank
®
via 3 pin plug
3/4" BSP M
1" BSP M
Stop valve
200 Micron
‘Y’ Strainer
* Pressure Limiting Valve
NOTE: Australian Building Standards stipulate
incoming mains pressure should not exceed 500kPa.
WHERE MAINS PRESSURE EXCEEDS 600kPa.
A PLV* MUST BE FITTED TO INLET!
INSTALLATION GUIDE - MUST BE READ IN CONJUNCTION
with Pump & RainBank/s
Installation & Operating Instructions
IMPORTANT: ALL PIPEWORK AND OUTLET FITTINGS FROM RAINBANK MUST BE LABELLED TO
AS3500. DO NOT CONNECT WITH CRIMPED FITTINGS.
ATS 5200.477 Lic WMKA 22042
PLEASE NOTE: ILLUSTRATION NOT TO SCALE
P/N 401432-6
401432-6_RB_In_Tank.indd 1 23/11/2016 3:30 PM
  • Page 1 1

Davey KRBCABS2-20 User guide

Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI