Analogue Solutions TR Series Quick start guide

Brand
Analogue Solutions
Model
TR Series
Type
Quick start guide

Analogue Solutions TR Series is a versatile piece of gear that can be used for a variety of purposes in music production. With its powerful synthesis capabilities and intuitive interface, the TR Series is perfect for creating your own unique sounds and rhythms. Here is a brief overview of some of the features and possible use cases of the TR Series:

  • Synthesis: The TR Series features a powerful synthesis engine that allows you to create a wide range of sounds, from classic analog basses and leads to modern digital soundscapes. With its intuitive controls, you can easily tweak the parameters of your sounds to get the perfect tone.

Analogue Solutions TR Series is a versatile piece of gear that can be used for a variety of purposes in music production. With its powerful synthesis capabilities and intuitive interface, the TR Series is perfect for creating your own unique sounds and rhythms. Here is a brief overview of some of the features and possible use cases of the TR Series:

  • Synthesis: The TR Series features a powerful synthesis engine that allows you to create a wide range of sounds, from classic analog basses and leads to modern digital soundscapes. With its intuitive controls, you can easily tweak the parameters of your sounds to get the perfect tone.
TB303 / TR606 rack mount bracket - Guide only - E.& O.E. (C) 6-1999 ANALOGUE SOLUTIONS www.users.globalnet.co.uk/~concuss/
TR606 / TB303 Rack mounting bracket
by Analogue Solutions
Note: we used to sell these, but there was not enough interest. If enough people can get together, I will get some more made up. Tel/Fax +44 (0) 1364 35 36 94
TB303 / TR606 rack mount bracket - Guide only - E.& O.E. (C) 6-1999 ANALOGUE SOLUTIONS www.users.globalnet.co.uk/~concuss/
91mm 91mm300mm
482mm
50mm
300mm
Metal Sheet 582x148mm. Apprx. 2.5mm thick aluminium. 4x slots (next sheet).
91mm
91mm
148mm
TB303 / TR606 rack mount bracket - Guide only - E.& O.E. (C) 6-1999 ANALOGUE SOLUTIONS www.users.globalnet.co.uk/~concuss/
91mm
50mm
<- BEND ->
6
Right end of bracket only shown. Holes and bends identical on
other end.
Rack-mounting holes are standard sized slots for 19" rack.
Height of bracket is 3.5U. Slot spacing vertically is 3.5U
11 x 7mm slot,
centre 6mm down, 9mm in from
edge.
9
134mm
<- BEND ->
TB303 / TR606 rack mount bracket - Guide only - E.& O.E. (C) 6-1999 ANALOGUE SOLUTIONS www.users.globalnet.co.uk/~concuss/
TB303
Notes:
If TB/TR feels too loose in Bracket, you may want to add more
strips or remove TR/TB's plastic feet with a scalpel.
Velcro strips should easily peel off back of TB/TR if necessary. If
not, warm up the glue of the Velcro with a hair-dryer to help peel
them off (when the glue warms up, it loses its stickyness).
Velcro cannot cope with continual ri[[ing apart. You should only
need to remove TR/TB off Bracket to change batteries. Should Velcro
fastening work loose, apply more (or new) strips.
Have fun.
T.Carpenter
Example of TB303 in a 4U space - leave an empty space above Bracket if you need to get a DIN SYNC24
lead in;
TB303 / TR606 rack mount bracket - Guide only - E.& O.E. (C) 6-1999 ANALOGUE SOLUTIONS www.users.globalnet.co.uk/~concuss/
Base panel of TR/TB (fig.1)
Velcro strips...
Battery Compartment
1, Make sure base of TR/TB is clean of grease, dirt and dust.
2, Peel off paper on ONE side only of each Velcro strip. Stick themacross the base of the TR/TB and press them down, firmly. (fig.1)
3, Peel off protective blue plastic off of Bracket.
4, Peel back off other side of Velcro strips
5, Line up TR/TB to Bracket - ensure top of TR/TB is alined with top of Bracket.
6, Stick it down! Press firmly.
Bracket will fit into a 4U space. This will leave a small gap above the back end of the TR/TB (the top of the Bracket. This space is enough to fit power cable and
right-angled 1/4" audio jack plug (and any other plugs - e.g. separate outs).
If you need to plug in a SYNC24 DIN cable, you may need to leave an empty space above TR/TB Bracket (total 5U).
Note; We accept no responsibilty for damage caused to synth due to incorrect fitting of kit or misinterpretation of instructions.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Analogue Solutions TR Series Quick start guide

Brand
Analogue Solutions
Model
TR Series
Type
Quick start guide

Analogue Solutions TR Series is a versatile piece of gear that can be used for a variety of purposes in music production. With its powerful synthesis capabilities and intuitive interface, the TR Series is perfect for creating your own unique sounds and rhythms. Here is a brief overview of some of the features and possible use cases of the TR Series:

  • Synthesis: The TR Series features a powerful synthesis engine that allows you to create a wide range of sounds, from classic analog basses and leads to modern digital soundscapes. With its intuitive controls, you can easily tweak the parameters of your sounds to get the perfect tone.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents