Box-Design Amp Box RS mono Product information

Henley Designs Ltd.

Product Information Sheet

Key Features:

- Fully-balanced single-channel tube tube design

- Highly ecient conversion from mains to output

power (92%)

- 2Ω drive capability

- Tube buer stage with reference quality

- SMD construction for shortest signal paths

- Line level preamp input (RCA & XLR)

- Top-quality speaker terminals for banana, spade or

bare-wire cables

- Antimicrophonic mechanical construction

- Luxury aluminium cabinet

- Available in Black and Silver

Pro-Ject Amp Box RS Mono

£699.00 (each) (UK SRP)

Fully-balanced valve mono power-amplier.

e Amp Box RS Mono is a true high-end power amplier designed to drive a single speaker to its

maximum potential. e amplier uses a fully balanced single-channel design layout, a highly ecient

energy saving PWM module, and a Tube buer input stage. e 3-dimensional sound-staging, perfect micro

dynamics and ultimate resolution combine with a high output and 2Ω drive capability to make a great

perfoming mono block that will out-perform any similarly-priced alternative.

e benet of using mono blocks in place of stereo power amps is in the ability to achieve improved sound-

staging and greater speaker eciency.

e Amp Box RS is also available for customers seeking a one-box stereo power amplier solution.

Technical Data:

Tubes: 1 x ECC88 (6922) THD: <0.05% @ 100W

Frequency Response: 10Hz - 50kHz (+0dB / -3dB) System Matching: 2Ω drive capability

Input: RCA / XLR Socket(s) Mono Power: 1 x 195W (4Ω) / 1 x 125W (8Ω)

Outputs: 4mm Ø Banana Outboard PSU: 48V / 2.5A

Weight: 2,020g (Without PSU) Dimensions: 206(w) x 72(h) x 220(d)mm

Henley Designs Ltd.

Unit 11, Moorbrook, Southmead Industrial Park, Didcot, Oxon, OX11 7HP

Tel: 01235 511 166 | Email: sales@henleydesigns.co.uk | Web: www.henleydesigns.co.uk