Allied Telesis AT-BRKT15 Installation guide

Brand: Allied Telesis

Model: AT-BRKT15

Type: Installation guide

Allied Telesis AT-BRKT15 is a wall-mount bracket designed for mounting ATI repeaters, such as the AT-MR12x, AT-MR410T and AT-MR810T series, that are housed in the “slim-line” micro-case. It is made of durable materials and is easy to install, making it a great choice for mounting your repeater in a convenient location. The AT-BRKT15 is also versatile, allowing you to mount your repeater in a vertical or horizontal orientation. This gives you the flexibility to choose the best mounting option for your needs.

Here are some of the key features of the Allied Telesis AT-BRKT15:

Durable construction for long-lasting use

Here are some of the key features of the Allied Telesis AT-BRKT15:

Durable construction for long-lasting use

AT-BRKT15 Wall-Mount Bracket Installation Manual

This manual will assist you in the installation of your AT-BRKT15. When

opening this Allied Telesyn product, make sure the package you have

received is complete and free of visible damage from shipping. This pack-

age should include:

• 1 bracket (A)

• 4 #8 x 7/8" self-tapping panhead screws (D)

• 4 “Bantam Plug” #8-10 plastic screw anchors

• Cable tie wraps (C)

NOTE

The AT-BRKT15 is only designed for use in ATI products.

The AT-BRKT15 is for mounting the ATI repeaters, such as the

AT-MR12x, AT-MR410T and AT-MR810T series, that are housed in the

“slim-line” micro-case.

Installation of the repeater in the mounting bracket requires the follow-

ing tools:

• Mounting screws for your application (shown in Figure 1 as D)

• Hammer

• Drill and 3/16" bit (or equivalent)

• Pencil

• Awl or other punch

NOTE

The AT-BRKT15 must be mounted in a vertical orientation with the

power supply (as indicated by the power receptacle)

to gain

maximum convection cooling.

Allied Telesyn International

19015 North Creek Parkway, Suite 200

Bothell, WA 98011

U.S. & International Tel: 800/424-4284

Technical Support Tel: 800/428-4835

PN 613-10353 Rev. A

This document produced using

Recycled Materials

Installing your Allied Telesyn AT-BRKT15

Refer to Figure 1.

1. Using the bracket as a template, mark the screw holes.

2. Use an awl or other punch to punch pilot holes.

3. Drill the holes.

4. If mounting on wallboard, insert the Bantam plugs into the holes.

Figure 1: Vertical Installation Example

Gently encourage the plugs with a hammer if necessary.

5. Remove the repeater’s bottom corner screws (B) and rubber feet.

6. Mount the repeater in the bracket using the corner screws, but

without the rubber feet.

7. Mount the bracket to the wall using the #8 x 7/8" pan head Phillips

screws (D).

8. Set aside the rubber feet. They are no longer required.

For speciﬁc dimensions, please see Figure 2.

Figure 2: Dimensions

These dimensions are subject to change without further notice from ATI.



4.63

0.20

0.37

0.14

3.67

4.63

1.70

6.14

10.40



8.15

(15.60)

(11.76)

(0.94)

(0.36)

(0.51)

(9.32)

(11.76)

(4.32)

(26.42)

(20.70)

2 3

Installing your Allied Telesyn AT-BRKT15

Refer to Figure 1.

1. Using the bracket as a template, mark the screw holes.

2. Use an awl or other punch to punch pilot holes.

3. Drill the holes.

4. If mounting on wallboard, insert the Bantam plugs into the holes.

Figure 1: Vertical Installation Example

Gently encourage the plugs with a hammer if necessary.

5. Remove the repeater’s bottom corner screws (B) and rubber feet.

6. Mount the repeater in the bracket using the corner screws, but

without the rubber feet.

7. Mount the bracket to the wall using the #8 x 7/8" pan head Phillips

screws (D).

8. Set aside the rubber feet. They are no longer required.

For speciﬁc dimensions, please see Figure 2.

Figure 2: Dimensions

These dimensions are subject to change without further notice from ATI.



4.63

0.20

0.37

0.14

3.67

4.63

1.70

6.14

10.40



8.15

(15.60)

(11.76)

(0.94)

(0.36)

(0.51)

(9.32)

(11.76)

(4.32)

(26.42)

(20.70)

2 3

AT-BRKT15 Wall-Mount Bracket Installation Manual

This manual will assist you in the installation of your AT-BRKT15. When

opening this Allied Telesyn product, make sure the package you have

received is complete and free of visible damage from shipping. This pack-

age should include:

• 1 bracket (A)

• 4 #8 x 7/8" self-tapping panhead screws (D)

• 4 “Bantam Plug” #8-10 plastic screw anchors

• Cable tie wraps (C)

NOTE

The AT-BRKT15 is only designed for use in ATI products.

The AT-BRKT15 is for mounting the ATI repeaters, such as the

AT-MR12x, AT-MR410T and AT-MR810T series, that are housed in the

“slim-line” micro-case.

Installation of the repeater in the mounting bracket requires the follow-

ing tools:

• Mounting screws for your application (shown in Figure 1 as D)

• Hammer

• Drill and 3/16" bit (or equivalent)

• Pencil

• Awl or other punch

NOTE

The AT-BRKT15 must be mounted in a vertical orientation with the

power supply (as indicated by the power receptacle)

to gain

maximum convection cooling.

Allied Telesyn International

19015 North Creek Parkway, Suite 200

Bothell, WA 98011

U.S. & International Tel: 800/424-4284

Technical Support Tel: 800/428-4835

PN 613-10353 Rev. A

This document produced using

Recycled Materials

Allied Telesis AT-BRKT15 Installation guide

Brand: Allied Telesis

Model: AT-BRKT15

Type: Installation guide

Here are some of the key features of the Allied Telesis AT-BRKT15:

Durable construction for long-lasting use

Download PDF

report

Allied Telesis AT-BRKT15 Installation guide

Allied Telesis AT-BRKT15 Installation guide

Related papers

Other documents