McALPINE SSK3 Space Saver Plumbing Kit for 3 Bowl Sink Operating instructions
- Type
- Operating instructions
SSK3
Sink
Space Saver Plumbing Kit for 3 Bowl Sink
With Two Discharge Hose Connections
INSTALLATION OF DISCHARGE HOSE FROM
WASHING OR DISHWASHING MACHINE
Uncouple the appliance discharge nozzle from the
tee piece and push the tapered end into the internal
wall of the appliance discharge hose.
Reconnect the nozzle to the tee piece.
If the appliance is not being installed at the same
time as the sink plumbing kit, ensure that the blue
blanking plug is placed in the nozzle section as
illustrated. Failure to do so will result in water
leaking from the nozzle section during discharge
from the sink.
Ensure that the blue blanking plug is removed from
the nozzle before an appliance is installed. Failure
to do so will result in damage to the appliance.
It is important to ensure that the discharge hose
from the appliance is installed to the recommended
height as stated in the appliance manufacturer’s
instructions.
© McAlpine
06.04.22
WASHING OR
DISHWASHING
MACHINE
DISCHARGE HOSE
FITS ON TO NOZZLE
EXTERNALLY
CUT AS REQUIRED
Optional Blanking Cap
Use Rubber Seal Supplied
No Red Plastic Washer
Required
Optional Blanking Cap Use
Rubber Seal Supplied
Blue Blanking
Plug
Red Plastic
Washer
Red Plastic
Washer
-
1
McALPINE SSK3 Space Saver Plumbing Kit for 3 Bowl Sink Operating instructions
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI