Ercol 2686 Assembly Instructions

Brand: Ercol

Model: 2686

Type: Assembly Instructions

Ercol 2686 is a 2-door wardrobe that provides ample storage space for your belongings. It features a sturdy construction with side panels, a top panel, and a back panel, all made from durable materials. The wardrobe comes with two doors that open smoothly, revealing a spacious interior with a hanging rail for hanging clothes and a drawer for storing smaller items. The drawer box unit is separate from the drawer, allowing for easy removal and cleaning. The wardrobe is designed to be assembled with ease, taking approximately 30 minutes with the help of two people.

Thank you for purchasing this teramo 2 door wardrobe. Please read the instructions carefully before use to en-

sure safe and satisfactory operation of this product.

Pre-assembly preparation

Please ensure instructions are read in full before attempting to assemble this product

Necessary Tools

This item is HEAVY

Please check the pack contents before attempting to assemble this product. A full checklist of components

is given in this leaflet. If any components are missing, please contact the retailer from whom you bought

this product.

This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE

WHEN LIFTING to avoid personal injury and (or) damage to the product.

This product takes approximately 30 MINUTES to assemble with 2 PEOPLE.

The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG

CHILDREN.

teramo 2686 2 door wardrobe

Ref: 00237/2686

Fittings and parts checklist

Top panel x 1

25mm Screws x 16

LH side panel x 1

30mm Screws x 4

RH side panel x 1

Left & Right doors x 2

Back panel x 1

Drawer box unit x 1

Wedge x 2

Hanging rail x 1

M6*35 Bolt x 14

Allen key x 1

Step by step assembly instructions

1. Take the drawer out of the drawer box unit as shown below.

2. Attach the side panels B & C to the drawer box unit, making sure the 4 dowels locate squarely into

the side panels. Using M6*35 bolt 8pc s , attach the side panels B & C through the inside holes

of the drawer box unit, as shown below.

3. Locate the top panel A into the dowels on the tops of the side panels B & C and secure using the 6pcs

4. To increase the overall strength, Using 4 of the 30mm screws (I) attach the side panel rails front and

back to the top of the wardrobe through the pre drilled holes provided, see below. Attach the door

M6*35 bolt.

panels onto the side panels as shown below.

5. Using the 25mm screws H (16), fix the back panel to the rear of the wardrobe as shown.

6. Put the hanging rail, G into the hanging rail supports inside the wardrobe, and put the drawer into the

the drawer box. Check that the doors are aligned correctly, if necessary adjust the doors hinges as shown.

Wall fixing instructions

Thank you for purchasing this ercol product.

Please read the instructions carefully before use to ensure safe and satisfactory operation of this product.

Installation shall be carried out exactly according to the manufacturer’s instructions, otherwise a safety risk can

occur if incorrectly installed.

WARNING: In order to prevent overturning this product must be used with the wall attachment device provided.

Warning

Serious or fatal crushing injuries can occur from furniture tipping over.

To prevent this furniture tipping over it must be permanently fixed to the wall.

2. Then re-secure the screws.

3. Mark the wall for drilling through

the hole in the short face of the

bracket.

Then remove the unit from the wall

so that the marked holes can be

drilled.

Ensure you use an appropriate fixing

type for your wall (see page 7). Then

return the unit to position.

4. Secure the unit to the wall fixings

with own screws through the

brackets.

3 4

1. Place your product in the final

position. Loosen the screws on the

metal brackets just enough so that

the slotted bracket can be extended

to meet the wall. Then take out the

screw and turn over the bracket as

step 2 shown.

PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

Ercol Furniture Ltd, Summerleys Road, Princes Risborough, Buckinghamshire. HP27 9PX www.ercol.com

If the chest is not level on your floor use the wedges provided, and snap them off so that they

do no Protrude out from the cabinet’s legs , you can also snap them lengthways if desired.

Types of walls

You can use one of the following types of wall plug if your walls are made of

brick, breezeblock, concrete, stone or wood.

1. General Purpose wall plug

Generally aerated blocks should not be used to support heavy loads, use a

specialist fitting in this case. For light loads, general - purpose wall plugs can

be used.

2. Plasterboard wall plug

For use when attaching light loads on to plasterboard partitions.

3. Cavity Fixing wall plug

For use with plasterboard partitions or hollow wooden doors.

4. Cavity Fixing - Heavy Duty wall plug

For use when fitting or supporting heavy loads such as shelving, wall

cabinets and coat racks.

5. Hammer Fixing wall plug

For use with walls stuck with plasterboard. The hammer fixing allows it to

be fixed to the wall rather than the plasterboard. Always check the fixing is

secure to the retaining wall.

6. Shield Anchor wall plug - Heavy loads

For use with heavier loads such as TV and Hi-Fi speakers and satellite dishes

etc.

Safety: Periodically check all fittings and wall fixings to ensure they

have not come loose and retighten as necessary.

Wall attached item only.

A guide to wall mounting and fixings

Warning

Serious or fatal crushing injuries can occur from furniture tipping over.

To prevent this furniture from tipping over it must be permanantly fixed to the wall.

Wall fixing screws are not included, since different wall materials require different types of screws / fixings.

Please ensure you use the correct screws / fixings for your type of walls and seek professional advice if you

are not sure.

Failure of the product due to incorrect fixings is the responsibility of the installer.

Important: When drilling into the walls always check that there are no hidden wires or pipes etc.

Ercol 2686 Assembly Instructions

Brand: Ercol

Model: 2686

Type: Assembly Instructions

Download PDF

report

Ercol 2686 Assembly Instructions

Ercol 2686 Assembly Instructions

Related papers

Other documents