2. Immedia
  3. 2Move wall display

Immedia 2Move wall display Operating instructions

  • Hello! I've reviewed the installation guide for the Etac Display IM4041. This document provides instructions on how to install the display including drilling holes, mounting fasteners, and securing it with screws. I'm ready to answer any questions you have about the display or its installation.
  • What is the diameter of the holes to be drilled?
    What is the minimum depth of the drilled holes?
    How many fasteners are supplied?
2Move Display
Installation guide
Installation guide for 2Move Display
Use the template on the back of this sheet, to mark the position of the 4 holes.
Drill 4 holes, with a diameter of 8 mm and a minimum depth of 50 mm.
Mount the 4 supplied fasteners in their holes.
Mount screws and washers in the top fasteners and hang the display on them.
Mount screws and washers in the lower 2 fasteners and tighten all 4 screws.
IM4041 05708012004508 H204xW531xL250
Item no GTIN no Size in mm
IM4041
2Move Display
Manufacturer:
Etac AB
Etac Immedia A/S
Egeskovvej 12
DK-8700 Horsens
Denmark
2Move Display
Article name
For 2Move Board +
Disposable Cover
Description
Web: www.etac.com
260 mm
100 mm
x 4
x 4
x 4
Hole Size Ø 8 mm x 50 mm
Keep this line level
/