2. Mixet
  3. 132250

Mixet 132250 Installation guide

  • I've reviewed the provided installation instructions for the control handles. This document outlines the necessary steps for a successful installation, including turning off the water supply, removing old parts, installing new ones, and checking for leaks. I'm ready to assist you with any questions you may have about this device.
  • What is the first step in the installation process?
    What parts need to be removed during the installation?
    What should be checked after installing the new parts?
INSTALLATION INSTRUCTIONS
INSTRUCCIONES DE INSTALACIÓN
1. Turn off water supply.
2. Remove the volumen and temperature control handles, the
escutcheon and the retainer nut.
3. Replace escutcheon and control handles. Turn on water supply
and check for leaks.
1. Cierre el suministro de agua.
2. Retire los mandos de control de volumen y temperatura,
la placa decorativa y la tuerca de retención.
3. Instale la placa decorativa y los mandos nuevos, abra el
suministro de agua y examine si hay fugas de agua.
/