King Canopy INASW6P10WH Operating instructions

Type
Operating instructions
Instant Pop Up Canopy Side Wall
Instructions
King Canopy Brand Products • PIC America, Ltd.
8009 Purfoy Road • Fuquay-Varina, NC 27526
1-800-800-6296 • www.kingcanopy.com
After you have attached the cover to your instant canopy
frame and it is locked in the fully extended position your
side walls can be attached.
1
2
3
4
5
Before raising the canopy to an extended height fold
up the two adjacent corners of the cover to reveal the
inside perimeter hook & loop. Keeping all four walls
zipped together, start at one leg and work around the
perimeter.
Align the wall panels with the sewn seams centered to the
length of the legs. Holding the sidewall with the zipper
facing out, fold the top edge of the wall so that the hook &
loop matches the top edge of the cover.
Pull down on each plastic tab (located on the corners
of the cover) to turn the exposed edge of the cover and
sidewall in. This could be a tight t as the cover is brand new.
For additional room, unlock the corner ttings to relax the
tension & pull the cover valance down. Be sure to re-lock all
ttings. Next secure the hook & loop strips or Plastic Clips
around each corresponding leg. Zipper the ends of each
wall together to enclose the canopy.
Finish Extendingthe Legs of the Canopy to Desired Height.
Your side wall kit comes equipped with zippered walls for
easy entry and exit.
Please Visit Our Website & YouTube Page to View Videos of
This and Our Other Setup Instructions for Our Products.
  • Page 1 1

King Canopy INASW6P10WH Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI