Xmart HL-WALL-11 Solar Lamp User manual

HL-WALL-11

Solar Lamp

USER MANUAL

Parts Identication Operation Instructions

Installation Instructions

Solar Panel must be oriented toward sun for battery

charging efciency

Mode Change: Press switch shortly to choose Mode 1,

Mode 2, or Mode 3.

Available Modes:

Mode 1 0LM + PIR 1000LM x 10s (1 Flash):

Mode 2 (2 Flashes): 20LM + PIR 1000LM x 10s

Mode 3 (3 Flashes): 20LM Until Dawn

Solar Panel

Lampshade

PIR

Switch and Indicator

Special Features:

Polycrystalline Solar Panel

Li-ion Rechargeable Battery

Equipped With PIR Sensor

Congurable Operation Modes

Multi-angle Adjustable

Multiple Installation Possibilities

Thermal Conductive Plastic Case

Compact Design, High Brightness

1000

lumens

Power On/Off: Press switch for 1.5 Sec, approx.

Fix the lamp to the wall with screws or cable tie

Cable Tie Cable Tie Screws

Adjust orientation angle as needed

60.00

2 - 4.50

Rear View Installation Orices

www.xmart-ups.com

Select Operation Mode according to your own

requirements

Indicator LED will ash once when selecting Mode 1,

twice when selecting Mode 2, and 3 times when

selecting Mode 3

IMPORTANT

1. Use standard installation accessories

2. If stored, charge the lamp every 3 months, to avoid

battery damage

3. If stored for more than 1 year without charging, make a

charge & discharge process to assure battery is in good

condition, otherwise it is not allowed to use.

WARNING

1. Keep the device away from re and re risk

2. There are no replaceable parts inside the lamp. If disassembled warranty will be void.

3. Do not remove battery for other use. If backup time is too short, lamp’s battery needs to be recharged under bright sunlight

4. Clean solar panel regularly for more efcient operation and longer backup (Suggestion: At least every 6 months)

5. Long term storage might cause battery damage and leakage, Leakage might cause battery spontaneous combustion

6. Operation temperature for this lamp must comply with Technical Specications

HL-WALL-11 - TECHNICAL SPECIFICATIONS / ESPECIFICACIONES TECNICAS

Luminosity / Luminosidad (LM) 1000

SOLAR PANEL / PANEL SOLAR

Type & Capacity / Tipo y Capacidad Polycrystalline / Policristalino, 0.5 W

Li-Ion BATTERY / BATERIA Li-Ion

Capacity / Capacidad 3.7 Vdc / 7.4WH / 2.000 mAH

Charge & Discharge Temperature /

Temperatura de Carga y Descarga

Charge / Carga: 0 to/a 45 °C

Discharge / Descarga: -20 to/a 60 °C

Recharge Time / Tiempo de Recarga 20 H

ILLUMINATION / ILUMINACION

LED (OSRAM) 2835 - 20pcs

Light Color Temperature / Temperatura de Color de la Luz 4000K, Ra 80+

Efciency / Eciencia 190 lm/W

OPERATION / OPERACION

Backup (During cloudy days) / Autonomía (con Poca Luz Solar) Up to 10 nights / Hasta 10 noches

Operation Modes / Modos de Operación

Mode 1: 0LM + PIR 1000LMx10S

Mode 2: 20LM + PIR 1000LMx10S

Mode 3: 20LM

Mode Indication / Indicación de Modo Mode 1: 1 Flash - Mode 2: 2 Flashes - Mode 3: 3 Flashes

Modo 1: 1 Destello - Modo 2: 2 Destellos - Modo 3: 3 Destellos

Capacity Indication / Indicador de Capacidad N/A

PIR 120º, >5m

IP/IK Codes / Códigos IP/IK IP65 / IK10

Directives / Normativas CE (IEC60598-1 / IEC60598-2-3 / EN55015 / EN61547)

Installation Height / Altura de Instalación 2.0 to/a 3.0 mts

HL-WALL-11

89.97

86.93

55.34

89.50

85.80

79.47

60.00

2 - 4.50

Top View / Vista Superior

Side View / Vista Lateral Front View / Vista Frontal

Isometric View / Vista Isométrica

Rear View (Installation Orices)

Vista Trasera (Oricios de Instalación)

Packing Information / Información de Empacado:

Dimensions / Dimensiones

Carton / Cartón (mm) Net/Neto Gros/Bruto

Inner Box / Caja Interna 1 95 x 60 x 87 0.19 0.2

Carton / Cartón 24 372 x 325 x 305 12 12.5

Net and Gross weight information is for reference purposes only / La información de pesos Neto y Bruto, es solo referencial

Model

Modelo

Packing Type

Tipo de Empaque

Packed Units

Unidades Empacadas

Carton Weight / Peso Cartón (Kg)

HL-WALL-11