Superabrasive L20-S Owner's manual

Type
Owner's manual
LAVINA® 20-S User Manual
Tech Support Line: 800-987-8403 | www.superabrasive.com | info@superabrasive.us
Superabrasive UserManual OriginalLanguageLavina®20S 8/2014
2
Superabrasive UserManual OriginalLanguageLavina®20S 8/2014
3
WARRANTY AND RETURNS
WARRANTY POLICY FOR LAVINA® S MACHINES
A warranty card must be submitted to Superabrasive within 30 days of purchase in order for the foregoing warranty to
apply.
You can either mail a hard copy of the warranty card or submit it electronically - see page 2.
Superabrasive warrants, from the time of delivery and receipt by the original customer, new and unused products
sold by
Superabrasive or Superabrasive-appointed distributors or dealers. Goods shall be free from defects in
materials and
workmanship. Superabrasive or a Superabrasive-appointed repair facility shall either replace or
repair any defects in the
Goods resulting from faulty design, materials, or workmanship. Products repaired or
replaced during the warranty period
shall be covered by the foregoing warranty for the remainder of the original
warranty period, or ninety (90) days from date
of the repair or shipment of the replacement, whichever is longer.
Spare parts for repair will be either new or equivalent to
new.
Warranty period shall be 2 years from the time of delivery and receipt by the original customer, or 600 operating
hours on
the machine - whichever occurs first. Superabrasive will cover the shipping charges for the transportation
of the machine to
Superabrasive (or an approved repair facility) and back to the customer (within the contiguous 48
United States) in the event
that the damage occurs and is reported within the first 90 days or 200 operating hours -
whichever occurs first. Shipping
charges, if covered by Superabrasive, must be agreed upon in advance and
approved by Superabrasive. Thereafter, the
customer will have to cover the shipping charges to Superabrasive and
back. Superabrasive will not warranty Goods after a
period of 2 years from the time of delivery and receipt by the
original customer, or 600 operating hours on the machine -
whichever occurs first.
Superabrasive shall not be liable for any defects that are caused by circumstances that occur after the Goods
have been
delivered and whilst the Goods are in the possession of the purchaser. Furthermore, the warranty
does not include normal
wear and tear or deterioration. Wear parts are not warranted. Superabrasive is not liable
for defects arising out of use of
non-OEM parts.
The Warranty is void if the purchaser has not followed the maintenance plan stipulated by the machine’s manual
and
warranty card. The warranty is void if the purchaser repairs said Goods himself, or if repairs are conducted by a
repair facility
that is not approved by Superabrasive. Superabrasive’s liability does not cover defects which are
caused by faulty
maintenance, incorrect operation, faulty repair by the purchaser, or by alterations conducted
without Superabrasive’s prior
written consent. The same applies to any alterations of the Goods or services
performed by another party other than
Superabrasive, a Superabrasive-appointed distributor, or a Superabrasive-
approved repair facility. The warranty is not
applicable on a defect that arises due to tools or parts that are not
original to Superabrasive. Replaced defective parts shall
be placed at Superabrasive’s disposal and shall become
property of Superabrasive. If such defective parts are replaced
within the warranty period, the shipping charges will be covered by Superabrasive. In warranty complaint cases,
when no
defects are found for which Superabrasive is liable, Superabrasive shall be entitled to compensation for
the labor, material
cost, and shipping charges, incurred by Superabrasive as as a result of the complaint.
The warranty herein is non-transferable, and only applies to the original owner or purchaser of the machine.
RETURN POLICY FOR LAVINA® S MACHINES
The Lavina® S machines may be returned, subject to the following terms:
In no case, a machine is to be returned to Superabrasive Inc. for credit or repair without prior authorization.
Please contact
Superabrasive Inc. or your local distributor for an authorization and issuance of a return
authorization number. This number
along with the serial number of the machine must be included on all packages
and correspondence. Machines returned
without prior authorization will remain property of the sender and
Superabrasive Inc. will not be responsible for them. No
machines will be credited after 90 days from the date of
invoice.
All returns must be shipped freight prepaid. Returned machines may be exchanged for other equipment or parts of
equal
dollar value. If machines are not exchanged, they are subject to a fifteen percent (15%) restocking fee.
Superabrasive UserManual OriginalLanguageLavina®20S 8/2014
4
WARRANTYANDRETURNS............................................................3
1.GENERALINFORMATION............................................................5
MANUFACTURER...........................................................................5
GENERALDESCRIPTION..................................................................5
MACHINECHARACTERISTICS..........................................................5
MAINDESIGN.................................................................................5
ENVIRONMENTALCONDITIONS.....................................................5
ELECTRICALCONNECTION..............................................................5
VACUUMCONNECTION.................................................................6
TECHNICALDATA...........................................................................6
VIBRATIONS...................................................................................6
2.SAFETYINSTRUCTIONS...............................................................6
RECOMMENDEDUSE.....................................................................6
PROHIBITEDUSE............................................................................6
FEATUREINCLEMENTCONDITIONS................................................6
POSSESSELECTROMAGNETICRADIATION......................................6
PREPARATIONFORWORK.............................................................6
PROTECTIONDEVICES....................................................................7
ARRESTFUNCTIONS.......................................................................7
SAFEUSE........................................................................................7
RESIDUALRISKS.............................................................................7
BEFOREYOUBEGIN........................................................................7
OPERATINGMACHINE..................................................................7
AFTERWORKISCOMPLETED...........................................7
THEWORKAREA..........................................................7
PERSONALPROTECTIVE.................................................................7
EQUIPMENT(PPE)..................................................................7
OPERATOR..................................................................................7
3.HANDLINGANDTRANSPORTATION.........................................13
PREPARINGTHEMACHINEFORTRANSPORTATION.....................13
STORAGE......................................................................................13
4.OPERATION..............................................................................13
PRELIMINARYCONTROLS.............................................................13
ADJUSTINGANDMOUNTINGTOOLS...........................................14
THECONTROLBOARD..................................................................14
STARTINGTHEMACHINE.............................................................14
OPERATINGTHEMACHINE...........................................................14
STOPPINGTHEMACHINE.............................................................14
ALARM.........................................................................................14
5.TOOLSANDACCESSORIES........................................................15
WEIGHTS......................................................................................15
TOOLHOLDERKEY.......................................................................15
FOAMPLATE................................................................................15
SECURITYPLATEFORQUICKCHANGEPADS..................................15
6.POPULARTOOLS......................................................................16
RECOMMENDEDTOOLS...............................................................16
7.EXPLODEDVIEW......................................................................17
GENERALEXPLODEDVIEW(FIG.7.1)............................................17
MAINHEADEXPLODEDVIEW(FIG.7.2)........................................17
TOPCOVEREXPLODEDVIEW1(FIG.7.3)......................................17
TOPCOVEREXPLODEDVIEW2(FIG.7.4)......................................17
BOTTOMCOVEREXPLODEDVIEW1(FIG.7.5)..............................18
PLANETARYDRIVEEXPLODEDVIEW(FIG.7.6)..............................18
BOTTOMCOVEREXPLODEDVIEW2(FIG.7.7)..............................18
PULLEYUNITSEXPLODEDVIEW(FIG.7.8).....................................18
CARRIAGEEXPLODEDVIEW(FIG.7.9)...........................................18
TOOLHOLDEREXPLODEDVIEW(FIG.7.10)...................................18
8.MAINTENANCEANDINSPECTION............................................19
CLEANING....................................................................................19
CHECKDAILY................................................................................19
CHECKANDREPLACEAFTERTHEFIRST15WORKINGHOURS......19
CHECKEVERY200WORKINGHOURS...........................................19
CHECKEVERY400WORKINGHOURS...........................................19
VACUUM.....................................................................................19
WATERLEAKS..............................................................................19
MECHANICALPARTS....................................................................19
ELECTRICALSYSTEM.....................................................................19
LAVINA®20SELECTRICALSCHEMESWITHYASKAWAINVERTER20
9.TROUBLESHOOTING.................................................................21
INDEXOFPROBLEMSANDSOLUTIONS........................................21
9.1REPLACINGPOWERCORDANDPLUGS...................................21
9.2DISMOUNTINGANDMOUNTINGTOOLHOLDERTOCHANGE
BUFFERSANDSPIDERS,CHANGINGVRINGSANDFELTRINGS....21
9.3TENSIONINGANDREPLACETHEPLANETARYBELT.................22
9.4TENSIONINGUSEDPLANETARYBELT.....................................22
9.5MOUNTINGANDTENSIONINGANEWPLANETARYBELT.......22
9.6REPLACINGPULLEYUNITS......................................................23
9.7MOUNTINGTHEBELT.............................................................25
9.8CHECKINGTHETENSIONOFTHEBELT....................................26
9.9MOTORCONNECTION............................................................26
9.10FAULTDIAGNOSISINVERTERYASKAWAV1000...................27
10.DISPOSAL...............................................................................29
11.MANUFACTURER’SCONTACTS...............................................29
12.SPAREPARTS.........................................................................30
ASSEMBLYANDPARTSSPECIFICATIONS......................................30
1.LAVINA®20SGENERALPARTS/FORMACHINESPRODUCED
BEFOREJAN.12014/....................................................................30
1.LAVINA®20SGENERALPARTS/FORMACHINESPRODUCED
AFRTERJAN.12014/..................................................................30
2.LAVINA®20STOPCOVERPARTS1..........................................31
4.LAVINA®20STOPCOVERPARTS2..........................................31
3.LAVINA®20SGUARDPARTS...................................................31
5.LAVINA®20STOPCOVERPARTS3..........................................32
6.LAVINA®20SBOTTOMCOVERPARTS1..................................32
7.LAVINA®20SPLANETARYDRIVEPARTS..................................32
8.LAVINA®20SBOTTOMCOVERPARTS2..................................33
10.LAVINA®20STOOLHOLDERPARTS......................................34
11.LAVINA®20SWATERSUPPLYPARTS.....................................34
FORMACHINESPRODUCEDBEFOREJAN.12014/.......................34
11.LAVINA®20SWATERTANKPARTS........................................34
FORMACHINESPRODUCEDAFTERJAN.12014/.........................34
13.LAVINA®20SCONTROLBOXPARTS200240VOLT..............37
1.GENERALINFORMATION
Thisowner’smanualisintendedfortheoperatoroftheLavina®Smachine,theservicingtechnicianaswellasforanyoneinvolved
withoperatingorservicingthemachine.Werecommendthatyoureadtheinstructionsverycarefullyandfollowthemstrictly.
Themanualincludesinformationaboutassembling,using,handling,adjustingandmaintainingyourLavina®Sfloorgrindingand
polishingmachine.
MANUFACTURER
Superabrasivewasfoundedin1987,asamanufacturerofhighqualitydiamondtoolsforthestoneandconcreteindustry.Today,
Superabrasiveisoneoftheworld’sleadingcompaniesintheproductionofdiamondtoolsandfloorgrindingmachinery.At
Superabrasive,westrivetodelivertheverybestsolutionstoourcustomers,andenablethemtoworkmoreefficiently.
GENERALDESCRIPTION
TheLavina®Smachineisintendedforgrinding,polishingandbuffingconcrete,marble,granite,limestoneandterrazzosurfaces
withdiamondtools.
TheLavina®Smachineisathreediscmachine,whichcanbeuseddryaswellaswet.
Forbestresults,useonlytoolsmanufacturedorrecommendedbySuperabrasiveanditsdistributors.Additionally,themachinecould
beusedforgrindingwoodfloorsurfaces.
TheLavina®Smachineismanufacturedandfittedfortheabove
mentionedapplicationsonly!Everyotherusemaycauseriskstothepersonsinvolved.
MACHINECHARACTERISTICS
TheLavina®Smachineismadeoftwomaincomponentsections:
MAINDESIGN
Thetwomaincomponentsectionsarethecarriageandmainhead.
Thehandle(Fig.1.2)ontheframecanbeadjustedbyheightandallowstheoperatortoworkin
acorrectandsafeworkingposture.
Thehalogenspotlight(Fig.1.2)enablestheoperatortoworkindarkerareas.
Existinglightingsystemdoesnotreplaceadequateoverheadlighting.
Theframe
Thecontrolsarepositionedontopoftheelectricalbox(fig.1.3)
Theelectricalbox(fig.1.3)containstheelectricswitchingdevicesandthe
inverter.Themainfeedingcableisconnectedwithaplugandsocketontop.Themotor
feedingcableispluggedintothesocketlocatedonthebottomofthebox.Thetankisonthe
oppositesideoftheframe,sothattheweightofthewaterhasnoinfluenceontheoperationof
themachine.Theframeweight,ontheotherhand,isfullyabsorbedbythedrivingwheels.An
electricpumpspraysthewaterthroughafrontsprayer.Themotorismountedonthebase
plateandisdrivingthethreeheadswithabeltsystem.Theplanetaryheadisdrivenbya
secondflatbelt.
ENVIRONMENTALCONDITIONS
ThetemperaturerangeforoperatingtheLavina®Smachineoutdoorsisbetween41°Fand86°F
or5°Cand30°C.NeverusetheLavina®Smachineduringrainorsnowwhenworkingoutdoors.
Whenworkingindoors,alwaysoperatethemachineinwellventilatedareas.
ELECTRICALCONNECTION
Thevoltage(Volt)andpower(Ampere)aredisplayedonalabelontheelectricalcontrolboxto
avoidanyincorrectconnection.Refertothesebeforeconnectingthepower.Toavoidelectrical
shocks,makesurethegroundpowersupplyisfunctioningproperly.
Figure 1.3
Fi
g
ure 1.1
Figure 1.2
Superabrasive UserManual OriginalLanguageLavina®20S 8/2014
6
VACUUMCONNECTION
Aconnectionforavacuumdustextractorislocatedonthecarriage.TheLavina®Smachinedoesnotincludeavacuumdustextractor.
Thecustomermustpurchasethevacuumdustextractorseparately.ThehoseofthevacuumextractormustbeØ50.8mmandcan
beglidedoverthepipe.Thevacuumdustextractormustbeadaptedforfloorgrindersandhaveaminimumairdisplacementof
320m3/hwithanegativevacuumof21kPa.
TechnicalData
Lavin20S
Voltage/Hz 1phx200240V5060Hz
Amperage Max14 Amps
Power3kW 4HP
Toolholderrpm3001100rpm
Workingwidth510mm 20”
Tooldiameter(QCPlate)3x225mm 3x9”
Weight162 kg 357 lbs
Grindingpressure80 kg 177 lbs
Additionalweightmax1x22kg max1x48 lbs
Application wetanddry
VacuumhoseportYes
Watertankcapacity20 l5.2gal
Waterfeed withpump(peripheralandfront)
Cablelength17.4m57ft
MachineLxWxH1350x540x1100mm 53.1”x21.3”x43.3”
PackingLxWxH1150x730x1155mm 45.2”x28.7”x45.5”
Vibrations
ThevibrationsofthemachinearewithinthelimitsofdirectivesandharmonizedstandardsfromtheEuropeanUnionwhenthe
Lavina®Sisoperatedwiththerecommendedtoolsandinnormalconditions.
SonorousEmissions
ThesonorousemissionsarewithinthelimitsofdirectivesandharmonizedstandardsfromtheEuropeanUnionwhentheLavina®Sis
operatedwiththerecommendedtoolsandinnormalconditions.However,aspreviouslystated,theoperatormustwearear
protectors.
LabelData
ThedataonthelabelprovidesthecorrectVoltageandkW(neededforoperationalpurposes);
Weight(neededfortransportationpurposes);productionyearandserialnumber(neededformaintenancepurposes).
CustomerService
ForcustomerassistanceandtechnicalsupportcallyourlocaldistributororcallSuperabrasiveInc.at
18009878403orvisitusat:www.superabrasive.com,whereyoucandownloadacopyofthismanual.
2.SAFETYINSTRUCTIONS
RECOMMENDEDUSE
TheLavina®Smachineis
designedandmanufacturedtogrindandpolishconcrete,
terrazzo,andnaturalstonefloors.Itcanbeusedforrenovations
aswellasforpolishing.Themachineisdesignedfordryorwet
use.Whenusingitdry,useavacuumofappropriatesize.For
moreinformation,pleaserefertothechapteronhandlingthe
vacuumconnection.
PROHIBITEDUSE
ThemachineMUSTNOTbeused:
ForapplicationsdifferentfromtheonesstatedintheGeneral
Descriptionchapter.
Fornonsuitablematerials.
Inenvironmentswhich:
Possessrisksofexplosion
Possesshighconcentrationofpowdersoroilsubstancesintheair
Possessrisksoffire
Featureinclementconditions.
Possesselectromagneticradiation.
PREPARATIONFORWORK
Makesurethat:Youhaveclosedtheworkarea,sothatnoperson
unfamiliarwithoperatingthemachinecanenterthearea.Thetool
plateandtoolsareadjustedtothemachineproperly.Thereareno
missingpartsofthemachine
Themachineisinuprightworkingposition.Theprotectiondevices
areworkingproperly.Theelectricalcableisfreetomoveandfollow
themachineeasily.Inordertokeeptheelectricalcablefrombeing
Superabrasive UserManual OriginalLanguageLavina®20S 8/2014
7
damaged,novehicleshouldcrossthezonewhereelectrical
cablesaresituated.
PROTECTIONDEVICES
Themachineisequippedwith
severalprotectiondevicesincludingthefollowing:
Anemergencystopbutton
Aprotectionskirtandahoodforprotectingthetoolplates.
Thesedevicesprotecttheoperatorand/orotherspersonsfrom
potentialinjuries.Donotremovethem.Oncontrary,before
usingthemachine,pleaseensurethatallprotectiondevicesare
mountedandfunctionproperly.TheSecurityplateavoidthe
Quickchangepadstolooseduringwork
ARRESTFUNCTIONS
Functionsofarrestingofthe
machinearefollowing:
Buttontostopthemotor(category1)
Emergencybutton(category1)
SAFEUSE
TheLavina®Sisdesignedto
eliminateallriskscorrelatedwithitsuse.However,itisnot
possibletoeliminatetherisksofanaccidentwiththemachine.
Anunskilledoruninstructedoperatormaycausecorrelated
residualrisks.Suchrisksare:
PositionRisksduetooperator’sincorrectworkingposition
TanglingupRisksduetowearinginappropriateworkingclothes
TrainingRisksduetolackofoperationaltraining
NOTE:Inordertoreduceallconsequencesoftheabove‐
mentionedrisks,weadvisethatmachineoperatorswillfollow
theinstructionsinthemanualatalltimes.
RESIDUALRISKS
Duringthenormaloperating
andmaintenancecycles,the
operatorisexposedtofewresidualrisks,whichcannotbe
eliminatedduetothenatureoftheoperations.
BEFOREYOUBEGIN
Workingareamustbeclear
fromanydebrisorobjects.
Afirsttimeoperatormustalwaysreadthemanualandpay
attentiontoallsafetyinstructions.
Allelectricconnectionsandcablesmustbeinspectedfor
potentialdamages.
Groundwiresystemofthepowersupplymustbealsoinspected.
Performgeneraldailyinspectionsofthemachineandinspect
themachinebeforeeachuse.
Alwaysinspectthesafetydevices:MounttheSecurityplatefor
theQuickchangepads.
Theemergencybreakmustbeclearandworking
Thetoolprotectormustbeworking
Themachinemustbeclean
Neveroperatethemachineintherain!
Confirmthattherearenomissingpartsespeciallyafter
transportation,repair,ormaintenance.
Beforefillingthewatertankwithwatermakesurethemachineis
notworkingandthemainswitchisturnedoff.
Beforeturningonthemachinemakesurethatthebaseisplaced
onthefloor,themachineMUSTNOTbeinanuprightposition
whenturnedon!
OPERATINGMACHINE
WhenoperatingtheLavina®S,makecertainthatthereisnoone,but
youaroundthemachine.
Neverleavethemachineunattendedwhileworking.
Theelectricalcablemustmovefreelyandmustbedamage‐free.
Thewaterhosemustmovefreelyandmustbedamagefree.Checkif
thefloor,youworkon,isnottoouneven.Ifthisisthecase,itmay
damagethemachine.
AFTERWORKISCOMPLETED
Cleanthemachineanditssurroundingsproperly
Emptyandcleanthewatertank
Unplugthemachineandwinduptheelectricalcable
Storethemachineinasafeplace
THEWORKAREA 
Makecertainthatpeopleorvehiclesdonotentertheworkarea.
Avoidcablesandhosesbeingintheway.
Alwayscheckthefloorfordebris
PERSONALPROTECTIVE 
EQUIPMENT(PPE)
Alwayswearsafetyshoeswhenworkingwiththemachine.
Alwayswearearprotectorswhenworkingwiththemachine.All
personnelintheimmediateworkareamustwearsafetyglasses
withsideshields.
Alwayswearsafetygloveswhenchangingthetools.
Alwayswearclothessuitablefortheworkenvironment.
OPERATOR
TheLavina®Smachine.
Theoperatormustknowthemachine’sworkenvironment.
Onlyoneoperatoratatimecanworkwiththemachine.The
operatormustbeproperlytrainedandwellinstructedprior
operatingthemachine.
Theoperatormustunderstandalltheinstructionsinthis
manual.
Theoperatormustunderstandandinterpretallthedrawingsand
designsinmanual.
Theoperatormustknowallsanitationandsafetyregulations
pertainingtotheoperationofthemachine
Theoperatormusthavefloorgrindingexperience.
Theoperatormustknowwhattodoincaseofemergency.
Theoperatormusthaveanadequatetechnicalknowledgeand
preparation.
13
Superabrasive UserManual OriginalLanguageLavina®20S 8/2014
3.HANDLINGANDTRANSPORTATION
PREPARINGTHEMACHINEFORTRANSPORTATION
Unplugthemotorcableplugfromthecontrolbox(Fig.3.1)anddisconnectthewaterhosefromthemainheadbypullingitout
(Fig.3.2).Windtheelectricalcableonthecarriage.Releasethepinsets(Fig.3.3)whichattachtheheadtothecarriage.
Pulloutthevacuumhoses,anddismountthe
headfromthecarriage(Fig.3.4).
TheheadoftheLavina®Smachinehasone
barandasupportusedashandlesintended
foreasymovingandtransportation(Fig.
3.4).TheLavina®Smachineisengineered
witheasytransportationinmind.The
abilitytodismantlethemachineintwo
partsallowsconvenienttransportationand
storage(Fig.3.4,Fig.3.5).
STORAGE
AlwaysstoreandtransporttheLavina®Smachineinadryplace.NevertransporttheLavina®Smachineunprotected;itmay
bedamagediftransportedunprotectedduringrainorsnow.
Whenstoringthemachine,thetemperaturemayfalldowntoorlessthan32F(or0oC),thereforeyou
shouldemptythewaterfromthesystemusingfollowingsteps:
‐ Pulloutthehoseofthetank(Fig.3.6)
‐ Usingcompressedairblowoutthewaterfromthesystemforthetwopositionsoftheturncock(Fig.3.7,Fig.3.8).


4.OPERATION
PRELIMINARYCONTROLS
Inspecttheworkingareaasexplainedinthesafetyinstructions.Forwet
use,fillinthewatertankwhentheelectricalcableisdisconnected.
Connect
thevacuumextractorandensurethatthevacuumhoseisclearandit
willfollowthemachineeasily.Pluginthemachineandmakesurethat
thepowercordisfreetofollowtheworkingdirectionoftheLavina®Smachine.
WATERFLOWCONTROLUNIT
Theoperatorcanchoosethewaterspraysinthefront(Fig.4.1)whenthelevelofthetapisinthehorizontalposition(Fig.4.2),when
thelevelisintheverticalposition(Fig.4.2)waterwillsprayundercoverofthemachine.
Theflowregulatingvalvelocatedonthetank(Fig.4.3)isincreasingorreducingthewaterflowtotheworkingareainfrontofthe
machineorunderthemainheadcoverofthemachine/onlyformachinesproducedafterJan.12014/.
Figure 3.4 Figure 3.5
Figure 3.1 Figure 3.3
Figure 3.2
Figure 3.6 Figure 3.7 Figure 3.8
Figure 4.2 Figure 4.3
Figure 4.1
14
Superabrasive UserManual OriginalLanguageLavina®20S 8/2014
ADJUSTINGANDMOUNTINGTOOLS
Mountthetoolsonlyafterensuringthatthereisenoughdiamondbondmaterialleft.Besurethattheplatesarealwaysclean
beforemounting.(Fig.4.3)
WARNING:Alwayssecurethe“Quickchange”padswiththesecurityplate(Fig.4.3),lockwiththetoolholderkey(Fig.5.4).
DiamondtoolswithVelcroareattachedonthree9inchfoamplates.Thefoamplatesaremountedonthekeylock
(butterfly).Alwaysusethetoolholderkey(Fig.5.4).
THECONTROLBOARD
1. Powercableplug
2. DigitalRPMindicatorIndicatestherevolutionper
minuteofthegrindingplates(nottherevolutionper
minuteoftheentireunit).
3. Lampcablegland
4. InverteralarmledLightsbluewhentheinvertergoes
intoalarmmode.
5. WaterpumpswitchLightsorangewhenthewater
pumpisworking.
6. Powerledlightsgreenwhenthepowerison
7. Forward/Reverseswitchchooseforwardforclockwise
rotationofthegrindingplatesorreverseforanti
clockwiserotationofthegrindingplates
8. PotentiometerchangestheRPMofthegrinding
platesfrom3001100rpm
9. Resetbuttonresetsthealarmoftheinverter
10. OFFbuttonstopsthemotor
11. ONbuttonstartsthemotor
12. EmergencybuttonusedinEmergencysituationsfor
stoppingthemotor
STARTINGTHEMACHINE
First,followthedirectionsinchapterSafetyDevicesandSafetyInstructions.Next,pulltheemergencystop(12)toensurethatthe
machineisinworkingcondition.Checkthepotentiometer(8)andensurethatitissetattheworkingspeed.Ifworkingwet,add
watertothefloorsurface.Ifworkingdry,omitthisstep,andinstead,switchonthevacuumunit.Finally,holdthemachinefirmly
andpushthestartbutton(11).
OPERATINGTHEMACHINE
Guidethemachineinstraightlinesacrossthefloor,andwitheachnewlineoverlapalittlebitofthepreviouslycompletedsurface.
Workataconstantspeedallowingthetoolstimetoworkataspeedappropriateforthetools’gritsize.Avoidvibrations.Donotstop
theLavinSmachineinonespotwhilethetoolsarestillworkingbecausetheywillleavemarksonthefloorsurface.Whenworking
wet,preliminarychosewiththewatertap(Fig4.2)thepositionforwaterfeedandperiodicallystartthepumptoreleasewateronto
thefloorsurface(Fig.4.6Pos.5).Whenworkingdry,checkthefloorsurfaceperiodicallytoensurethatdustisnotaccumulatingon
thesurface,alsocheckregularlythatyourvacuumworksproperly.
STOPPINGTHEMACHINE
Thestoppingofthemachinemustbedonegraduallyuntilthemotorstops.Donotstopmovingthemachinebeforearrestingthe
Motor,asthetoolscoulddamagethesurface.Tostop,pushtheoffbutton(10).UsetheEmergencybutton(13)onlyinemergency
oruseittoswitchthepowertotallyoff.Remembernottoholdthemachineinonespotbeforeturningoffthemotor.
ALARM
TheAlarmlight(4)willlightincaseinvertergoesinalarmmode.Themostcommonfailureismotorinoverload.Toresetthemode
pushresetbutton(9).
Figure 4.4 Figure 4.6
Figure 4.5
Figure 4.7
1234567
89101112
15
Superabrasive UserManual OriginalLanguageLavina®20S 8/2014
5.TOOLSANDACCESSORIES
WEIGHTS
Superabrasiveoffersadditionalweightsforincreasingtheproductivityofthemachine
(Fig.5.1).Eachadditionalweightweighsabout48lbsor22kg.Eachindividualapplication,
typeandconditionofsurface,powercapacityoftheoutlet,etc.willdeterminethenumber
ofweightsyoucanusewithout
trippingabreaker.
Theweightstacksontothreepostsaroundtheouterbowl(Fig.5.2).Theadditional
weightsdependonthetools;itisnotalwayspossibletoaddweights.Sometoolswork
tooaggressivelyandthemachinecanstop.Theweightcanbeorderedwithitemnumber
A07.00.00.00
TOOLHOLDERKEY
Thetoolholderkey(Fig.5.3)isusedforadjusting,mountinganddismountingofthefoam
plates.Alwaysusethekeyformounting.
ItemnumberisA03.00.00.00
FOAMPLATE
DiamondtoolswithVelcroaremountedonthefoamplate9“(Fig.5.4).Thefoamplateis
mountedonthe“QuickChange”System.
ItemnumberisLV9FPS
SECURITYPLATEFORQUICKCHANGEPADS
Plate(FIG.5.5)usedtoensurethe“QuickChange”pads.ItemnumberisA38.00.01
Fi
g
ure 5.3
Figure 5.1
Figure 5.5
Figure 5.4
Fi
g
ure 5.2
16
Superabrasive UserManual OriginalLanguageLavina®20S 8/2014
6.POPULARTOOLS
RECOMMENDEDTOOLS
QuickChangeSystemandToolingfeatureextremelyfastandconvenienttoolchanges,andalongtool
life,providingforgreatlongtermcostsavings.TheQuickChangepadsareproducedinfourdifferent
bondsforsuperhard,hard,mediumandsoftconcrete,inavarietyofgritsizes.Theyareofferedwith
1or2buttonsorrectangularsegments,whichallowsyoutocustomizetheaggressivenessofthecut.
Calibragrindingdiscs:ourpopularceramicbonddiscsaredesignedfortheremovalofdifficultscratches
andtheysaveyouvaluabletimebyeliminatingtheneedformultiplepasseswithmetaltools.Theycanbe
used
wetordry,andarebestforhardconcreteapplications.
Theyare3inch,withincludedVelcrobackattachment.
NATO®polishingdiscsfeatureaspecialresinformuladesignedforbothwetanddryapplicationsandauniquedesignwith
widechannelsallowingforworkonacleanersurfaceandensuringaqualitypolish.Availablein3and4insizes.Theyarewith
includedVelcroattachment.
VHARR®PremiumPolishingPadsaredesignedformechanicallypolishingandrestoringconcrete;alsoidealforterrazzoand
hardstonefloors.VHARR®padsareofferedinawidevarietyofdiametersandgritsizestoaccommodatemanyapplications.
Dryuseisstronglyrecommended.
ShinePro®arehighqualitydiamondimpregnatedpadsforfloormaintenance.Availableinavarietyofsizes,andaregreatfor
dailyuse.Whenusedwet,theyrequireonlywater(nowaxorchemicalsneeded)andareaveryenvironmentallyfriendlysolution
formaintainingfloors.
Useonlysuperabrasive’srecommendedtools.Formoretoolingoptions,visitwww.superabrasive.com
17
Superabrasive UserManual OriginalLanguageLavina®20S 8/2014
7.EXPLODEDVIEW
GENERALEXPLODEDVIEW(FIG.7.1)
MAINHEADEXPLODEDVIEW(FIG.7.2)
TOPCOVEREXPLODEDVIEW1(FIG.7.3)
TOPCOVEREXPLODEDVIEW2(FIG.7.4)
Figure 7.3
Figure 7.4
Figure 7.1 Figure 7.2
18
Superabrasive UserManual OriginalLanguageLavina®20S 8/2014
BOTTOMCOVEREXPLODEDVIEW1(FIG.7.5)
PLANETARYDRIVEEXPLODEDVIEW(FIG.7.6)
BOTTOMCOVEREXPLODEDVIEW2(FIG.7.7)
PULLEYUNITSEXPLODEDVIEW(FIG.7.8)
CARRIAGEEXPLODEDVIEW(FIG.7.9)
TOOLHOLDEREXPLODEDVIEW(FIG.7.10)
Figure 7.9
Figure 7.8
Figure 7.10
Figure 7.6
Figure 7.7
Figure 7.5
19
Superabrasive UserManual OriginalLanguageLavina®20S 8/2014
8.MAINTENANCEANDINSPECTION
CLEANING
Keepyourmachineclean.Cleaningthemachineonaregularbasiswillhelpdetectandsolvepotentialproblemsbeforetheycause
damagetothemachine.Mostimportantly,checkandcleanthetoolplateconnections,powercordandplugs,vacuumhosesand
watertank.
Figure 8.1
CHECKDAILY
AfteroperatingtheLavina®Smachine,theoperatorshouldconductavisualinspectionof
themachine.Anydefectshouldbesolvedimmediately.Payattentiontopowercords,
plugsandvacuumhoses,looseboltorscrews.
Toolholders:Buffersandspidersareconsumablesandmustbevisuallycheckeddailyand
replacedifneeded.Seethatflangesordiscsaremountedandlockedwellinplace.The
keylockholders(butterflies)shouldbealsochecked.
Checktherubberbuffersandfixingoftheholders.Theflangeholdingthebuffers(Fig.8.1
1)hastobefirmlyfixedtotheunit.Agapseentheremeansthatthereareloosescrews
fixingtheholder.Thescrewshavetobetightenedimmediatelyforsafeoperation.
Workingwithloosescrewsontheholdercouldalsocausebaddamagesonthemachine.
Tighteningforceofthescrewshastobe25...30N.m(18...22ft/lbs).
Itisveryimportanttoregularlycheckthescrews(Fig.8.12)thatfixthe
"Quickchange"holdertothesafetypart,sothattheholderwillnotflyawayifthebuffers
getdamaged.
“Quickchange”shouldbeclean.Thetensionoftheplanetarybeltcanbecheckeddailybymovingthemainheadandfeelingthe
resistanceofthemovingpulleys,ifthebeltslipstensionimmediately,seethechapterTroubleshooting.
CHECKANDREPLACEAFTERTHEFIRST15WORKINGHOURS
Checkthebelttensionafter15hoursworkingwiththemachine.
Thebottomcoverhasacontrolcover(Fig.8.2)thatallowsfastandeasycontrolandcorrection
ofthebelt.Itisrecommendedtocheckthetensionofthebeltafterthefirst15hoursandto
tightenifnecessary.Forthecorrecttension,seeTROUBLESHOOTING“mountingthebelt”.
Everytimeyouopenthecontrolcover,mountbackallthescrews.
CHECKEVERY200WORKINGHOURS
Every200workinghours,theoperatorshouldinspectallpartsofthemachinecarefully.Most
importantly,inspectandcleanthetoolplateconnections,powercordandplugs,vacuumhoses
andwatertank,andfilter.Also,checkthewaterflowofthepump.Checktheguard
Figure 8.2
assembly.Makecertainthewheelsarecleanandrotateproperly.Inspectthecontrolbuttons.Iftherearedefectivecontrolparts,
theyshouldbereplacedimmediately.Replacewornvacuum‐andwaterhoses.Checkthetensionofthebeltandtotightenif
necessary.Forthecorrecttension,seeTROUBLESHOOTING.
Dismountthetoolholders(SeeTroubleshooting)replaceallparts(Spider,buffers,sealercaps,“O”rings)withtheslightest
damageorconsume.
Opentheinspectioncoveronthemotorbasetochecktheplanetarydrivingbelt,bymovingthemainheadthebeltshouldnotslip
ontheplanetarypulleyanddrivethepulleys.
CHECKEVERY400WORKINGHOURS
Besidesthechecksof200workinghours,replacesealerandVringslikedescribedinchapter“TROUBLESHOOTINGREPLACING
BELTANDPULLEYUNITS”.Checkifbeltsandbearingsareingoodcondition,changeifneeded.
VACUUM
Asstatedpreviously,frequentlycheckhosesandotherpartsforclogging.
WATERLEAKS
Replaceanyleakingpartsimmediatelyasthewatercoulddamageyourmachine
MECHANICALPARTS
Partssuchasthebelts,sealrings,caprings,spidersandbuffersandguardassemblyaresubjecttowearandshouldbereplacedas
needed.
ELECTRICALSYSTEM
Dustshouldnotenterthecontrolbox,asitwilldestroythecontacts.Remove(blowout)anydustpresent.
TheLavina®20NS200240Voltwillautomaticallydetectiftheconnectionisbasedonsingle(L1,L2)orthreephase(L1,L2,L3)
208240Volt.Theoperatordoesnothavetoswitchthemachine;onlyconnecttotwophasesorthreephases.Forconvenience,
20
Superabrasive UserManual OriginalLanguageLavina®20S 8/2014
LAVINA®20SELECTRICALSCHEMESWITHYASKAWAINVERTER
200240Volt
LAVINA®20SELECTRICALSCHEMES
YASKAWACONNECTIONMAINCIRCUITTERMINALS
Figure 8.7
Themotorisconnectedin“Delta”
(triangle)230Volt,
reminderforthewireconnectionof
themotor.
Figure 8.4
Figure 8.6
Figure 8.5
21
Superabrasive UserManual OriginalLanguageLavina®20S 8/2014
Figure 9.2.7 Figure 9.2.8 Figure 9.2.9 Figure 9.2.10
Figure 9.2.11
9.TROUBLESHOOTING
INDEXOFPROBLEMSANDSOLUTIONS
9.1REPLACINGPOWERCORDANDPLUGS
Whenreplacingthepowercordorplugsalwaysusecordsandplugswithspecificationsastheoriginalones.
Neveruselowerqualityordifferenttypecordandplugs.
Inaddition,takeintoconsiderationisthedistanceoftheappliancefromtheelectricalsource.Thegreaterthedistance,the
greatertheresistanceandthelesscurrentthatwillbeavailableattheotherend,therewillbeavoltagedropandtheinverterwill
signalarmmode.Thisalsohappenifseveralmachinesareworkingonthesamelineorwhenthegeneratorisunderrated.Ingeneral
ourstandardpowercablecanbedoubledinlength,iflongerlengthsneededyouhavereplaceallthecableswithcableswithbigger
gageratedforthelengthandamperage.
9.2DISMOUNTINGANDMOUNTINGTOOLHOLDERTOCHANGEBUFFERSANDSPIDERS,CHANGINGVRINGSANDFELTRINGS
 

 
Tocheckorreplacethebuffersandthespiders,thetoolholdershavetobedismounted.Removethecountersunkscrewsontopof
thebuffer(Fig.9.2.1).Takethediscoff(Fig.9.2.2),thespidercanberemovedorreplaced(Fig.9.2.3).BylooseningfourHexcap
bolts(Fig.9.2.4),thedisccomesloose(Fig.9.2.5)andthebufferscanbereplaced(Fig.9.2.6).Attention,bymountingusealwaysthe
“blue”threadlockingadhesive,exceptontheboltstolockthebuffers(Fig.9.2.5).Alwaysusetheoriginalbolts.
Dependingonthenumber(3,4or6)ofbuffers,theholdercanbemoreflexibleorrigid.
Whenthetoolholderisdismounted,youcanchangethesealers(VRingandFeltRing).
TakeoutFeltRing,AdaptorandVRing.Beforemountingcheckonwhichsidetheadaptoris
fitting,rememberthecorrectside.MounttheVRingwiththesmallestlipoftheVtoinside
(Fig.9.2.7)justpushtheVringsothetopisonthesamelevelasthepulleytop(Fig.9.2.8).Then
taketheadaptorinthecorrectwayandpushtheVRingdownwiththeadaptor(Fig.9.2.9).The
lowestlipoftheVRingshouldonlybarelytouchitsglidingsurface;alsoneverpushtheVRing
downwithfingers.MountnowtheFeltringontop(Fig.9.2.10).Closethesealerswiththecap
(Fig.9.2.11).
Figure 9.2.1 Figure 9.2.2 Figure 9.2.3
Figure 9.2.4 Figure 9.2.5 Figure 9.2.6
22
Superabrasive UserManual OriginalLanguageLavina®20S 8/2014
9.3 TENSIONINGANDREPLACETHEPLANETARYBELT
 
Ifthebeltslipsorisbrokenseparatethecarriagefrommainhead,pulloutmotorplug(Fig.9.3.1),water(Fig.9.3.2)(Fig.9.3.3)
andvacuumtubes.Takeoffhandles,forks,andweightholderssoyoucandismountthetopcover(Fig.9.3.4)(Fig.9.3.5)
9.4TENSIONINGUSEDPLANETARYBELT
 
Noticingspeedlostinplanetarymovementitispossibletotensionthebeltforplanetarymovementasdescribedin
9.5Mountingandtensioninganewplanetarybelt.
9.5MOUNTINGANDTENSIONINGANEWPLANETARYBELT
 
 
 
Figure 9.3.1 Figure 9.3.2 Figure 9.3.3 Figure 9.3.4 Figure 9.3.5
Figure 9.4.1 Figure 9.4.2
Figure 9.5.1 Figure 9.5.2 Figure 9.5.3
Figure 9.5.6
Figure 9.5.4 Figure 9.5.5
Figure 9.5.7 Figure 9.5.8 Figure 9.5.9
23
Superabrasive UserManual OriginalLanguageLavina®20S 8/2014
Completelydismountthetensioningdevice(Fig.9.5.1).Make2signsonthedismountedbelt
exactly10cmoutofeachother(beltwithouttension)(Fig.9.5.2).Thepurposeistomeasure10.2
cmonthebeltintensionwhatisatensionof2%.,amaximumof2.5%isallowed.
ATTENTION:NEVER“OVER”TENSIONTHEBELT,THEBELTWILLBEDAMAGEDANDITWILL
NEVERRECOVERITSORIGINALTENSION
Mountthebeltbackaroundtheplanetarypulley;seethatthebeltisbehindthedrivingpulley
(Fig.9.5.3).Putthebeltaroundtheleftrollerofthetensioningdevice(Fig.9.5.4).Putthe
tensioningdevicebackinplaceandpullthebeltfromtherollerontherightside(Fig.9.5.5).Put
thebeltaroundthedrivingpulley(Fig.9.5.6).Begintotensionuntilthemeasureof10cmbetweenthemarksbecomes10.2cm
(Fig.9.5.7)(Fig.9.5.8).Tightenthetensioningdevicewhileturningtheboltmovetheplanetaryheadsothebeltcanslide.(Fig.
9.5.8).Donotforgettolockthetensioningdevice(Fig.9.5.9).
9.6REPLACINGPULLEYUNITS
 

Seepreviouschapterstotakeofthetoolholdersandtopcover.Unscrewthescrewsofthebottomcover(Fig.9.6.1).
Setthebottomcoverassemblyaside(Fig.9.6.2).RemovetheOringstoavoidlosingthem(Fig.9.6.3).
 
Onlythetwoloose(nondriving)pulleyscanberemovewithoutremovingontopthemotorbasediscandmotor.Loosethenuton
topofthepulley(Fig.9.6.4).Carefullypullouttheunitwithcrowbars,butdonotuseexcessiveforce(Fig.9.6.5)(Fig.9.6.6).
 
Ifallthepulleyunitshavetobereplaced,dismountmotorbasediscandmotor.Beforeremovingthebeltunscrewthecentral
pulley(soitdoesnotturnwhileunlocking)(Fig.9.6.7)(Fig.9.6.8).Pullthecentralpulleyoff(Fig.9.6.9).
Figure 9.5.10
Figure 9.5.10
Figure 9.6.1 Figure 9.6.3 Figure 9.6.2
Figure 9.6.4 Figure 9.6.6 Figure 9.6.5
Figure 9.6.7 Figure 9.6.9 Figure 9.6.8
24
Superabrasive UserManual OriginalLanguageLavina®20S 8/2014
 
 
 
 
 

Unlockbolts(Fig.9.6.10)andtakemoreoff(Fig.9.6.11).Unlockretainingshaft/bearing(Fig.9.6.12).Takeawaythefillingring
(Fig.9.6.13).Nowthemotorbasediscisunlocked,theonlywaytodismountitistopressitoutonabearingpress(Fig.9.6.14)
(Fig.9.6.15).Dismountingthedrivingpulley:takethetopscrewouttoreleasethebushing(Fig.9.6.16),pushthebushingtogetherwith
thewasherup(Fig.9.6.17),pushwasherdownofthebushing.,takebushingout(Fig.9.6.18),pushkeyout(Fig.9.6.19),nowthewasher
releases(Fig.9.6.20),dismountsealercap(Fig.9.6.21),thepulleycanbereleasedwithtwocrowbars;donotuseexcessiveforce
(Fig.9.6.22)(Fig.9.6.23),pushthesealercaptodismount(Fig.9.6.24),bymountingbackthesealercap,securewithsealant,centerthe
holestomountthepulley.
.
 
Figure 9.6.10 Figure 9.6.12 Figure 9.6.11
Figure 9.6.13 Figure 9.6.15 Figure 9.6.14
Figure 9.6.16 Figure 9.6.18 Figure 9.6.17
Figure 9.6.19 Figure 9.6.21 Figure 9.6.20
Figure 9.6.22 Figure 9.6.24 Figure 9.6.23
Figure 9.6.25 Figure 9.6.27 Figure 9.6.26
25
Superabrasive UserManual OriginalLanguageLavina®20S 8/2014
Changethetwootherpulleysasearlierdescribedinthechapter,bestwhenthemotorbasediscisdismounttochangetheroller
unitstoo.Unlockthenutontop(Fig.9.6.25).Thepulleyscanbereleasedwithtwocrowbars;donotuseexcessiveforce(Fig.9.6.26)
(Fig.9.6.27).
9.7MOUNTINGTHEBELT
   
   


ThemountingofthebeltisshownonFig.9.7.11.Puttingthebelt
ispossiblewhenthetensionerisinstartingposition:
‐loosenthenutspos.2
‐loosenenoughthenutspos.3(orunscrewthem).
‐unscrewthenut(pos.4)andpulloutthebush(pos.5)fromhole
Dinthetensioner(pos.1),thatwillallowthetensionertohavetheposition
inFig.9.7.11.
‐putthebeltfollowingstepsshownonFig.9.7.2;Fig.9.7.3and
Fig.9.7.4.(Itispossiblealsotoputthebeltonthe rollerunitassemblyasa
laststep.)Checkifthebeltisontherightplaceinthegroovesofeachof
thepulleyunits andonthecentralpulley.
Putbackthetensionerinapositiontheaxlebushingtofitinthe
tensionerhole(Fig.9.7.5)(Youcanpushdownthebushscrewingthenut
pos.4)
Tightenthenuts(pos.2,Fig.9.7.1)onthesectorsandunscrewhalf
rev.(Fig.9.7.5)Thiswillallowthetensionerturninminimumclearance.
Fastlightthebelt(Fig.9.7.7)inordertoachievetherightpositionandthen
tightenthenutinthecenterofthetensioner(Fig.9.7.6).Fastupthebelttakingcareofthetensioning(Fig.9.7.7).
ItisrecommendedthatthetensioningofthebeltbemeasuredwithOptikrikIIDevice(Measuringrange:5001400N)(Fig.9.7.8).For
anewbeltthetensioningforceis650N,andthefasteningforceis520N.
ATTENTION:NEVER“OVER”TENSIONTHEBELT,THEBELTWILLBEDAMAGEDANDITWILLNEVERRECOVERITSORIGINALTENSION
Tightenthetwonutsonthesectorsandcontranutonthetensioner(Fig.9.7.10).Putthesealringonthebottomcoverandclose
themachine(Fig.9.7.11).
Reassembleinthesamemanner.
YourLavina®Smachineisnowreadyforuse!
Figure 9.7.2 Figure 9.7.3 Figure 9.7.4
Figure 9.7.9
Fi
g
ure 9.7.1 Figure 9.7.5
Figure 9.7.6 Figure 9.7.7 Figure 9.7.8 Figure 9.7.10
Figure 9.7.11
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Superabrasive L20-S Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI