DreamGEAR i.Sound Twin Charger User manual

FOR TECHNICAL SUPPORT

PLEASE CONTACT: 1-877-999-DREAM

or support@dreamgear.net

www.isound.net

PRODUCT SET-UP:

1. Connect the Twin Charger AC adapter to the DC

input located on the back of the main charging unit.

Connect the other end to any standard wall outlet.

2. The Twin Charger includes iPod/iPhone brackets for

some of the latest iPod/iPhone models, choose the

corresponding brackets and place them on to the Twin

Chargers charging wells. If you cannot locate a bracket

for your iPod/iPhone model then choose a bracket that

best secures your iPod/iPhone onto the Twin Charger.

Note: all iPod models ship with a bracket, the bracket that

was included with your original iPod purchase is fully

compatible with the Twin Charger.

3. Connect 1 or 2 iPod/iPhone models to the Twin Charger

by placing them onto the charging pin located on top of the

Twin Charger, charging will begin automatically. Please refer

to your original iPod/iPhone instruction manual for charging

times. Charge status can be viewed on the unit being charged.

4. The Twin Charger features eye pleasing LED illumination.

The LEDs will automatically illuminate whenever a iPod/iPhone

is connected to the Twin Charger.

5. The Twin Charger features a LED “ON” and “OFF” switch

located on the back of the main unit. This switch is used for

switching the LEDs “ON” and “OFF”.

Download PDF