FOR TECHNICAL SUPPORT
PLEASE CONTACT: 1-877-999-DREAM
or support@dreamgear.net
www.isound.net
PRODUCT SET-UP:
1. Connect the Twin Charger AC adapter to the DC
input located on the back of the main charging unit.
Connect the other end to any standard wall outlet.
2. The Twin Charger includes iPod/iPhone brackets for
some of the latest iPod/iPhone models, choose the
corresponding brackets and place them on to the Twin
Chargers charging wells. If you cannot locate a bracket
for your iPod/iPhone model then choose a bracket that
best secures your iPod/iPhone onto the Twin Charger.
Note: all iPod models ship with a bracket, the bracket that
was included with your original iPod purchase is fully
compatible with the Twin Charger.
3. Connect 1 or 2 iPod/iPhone models to the Twin Charger
by placing them onto the charging pin located on top of the
Twin Charger, charging will begin automatically. Please refer
to your original iPod/iPhone instruction manual for charging
times. Charge status can be viewed on the unit being charged.
4. The Twin Charger features eye pleasing LED illumination.
The LEDs will automatically illuminate whenever a iPod/iPhone
is connected to the Twin Charger.
5. The Twin Charger features a LED “ON” and “OFF” switch
located on the back of the main unit. This switch is used for
switching the LEDs “ON” and “OFF”.
/