Noble House 305891 Operating instructions

Type
Operating instructions

This manual is also suitable for

Noble House 305891 is a versatile piece of furniture that combines a table and a chair in one. With its sturdy construction and easy assembly process, it's perfect for both indoor and outdoor use. The table can be used for dining, working, or as a coffee table, while the chair provides comfortable seating. Both the table and chair are adjustable, allowing you to customize them to your desired height. Additionally, the chair can be folded for easy storage or transportation.

Noble House 305891 is a versatile piece of furniture that combines a table and a chair in one. With its sturdy construction and easy assembly process, it's perfect for both indoor and outdoor use. The table can be used for dining, working, or as a coffee table, while the chair provides comfortable seating. Both the table and chair are adjustable, allowing you to customize them to your desired height. Additionally, the chair can be folded for easy storage or transportation.

Label Picture Descri
p
tion QT
Y
A Table Top 1
B Leg 4
Label Picture Description QTY
Bolt (M6*18MM) 17
Washer 17
Allen Key 1
Caution: You must read this before you proceed
TABLE
l
e house Home Furnishings LLC
Page 1 OF 4
Before Beginning Assembly:
Overview
This Table has multiple parts and may require up to 30 minutes to
assemble. To give you an overview of the Table parts, the above picture is
to help you put the various parts into perspective. Please read through the
instructions below to familiarise yourself with the parts and steps before
assembly.
FRONT FACING
Table Top Panel (A)
Leg (B)
l
e house Home Furnishings LLC
Page 2 OF 4
Step 2
Place the Table on a LEVEL SURFACE to check for wobbles.
If it wobbles, apply even steady pressure down on the Table.
This action should help align all parts.
Then proceed to tighten all Bolts at all joints
Do NOT fully tighten a Bolt in one go and then move on to the next one.
Rather, in a sequential manner, gradually tighten each Bolt until all Bolts are
evenly secured.
This methodology will ensure maximum evenness once all Bolts are fully
tightened.
Your Table is ready for use.
This Table can only be used on a flat, level surface.
Step 1
Place the Table Top(A) facedown on a clean non-marring surface.
Attach Leg(B) to Table Top(A) using Bolts() and Washers() with Allen Key() as
shown above.
Repeat the same process to install the remaining three Legs(B).
Do not fully tighten the Bolts.
l
e house Home Furnishings LLC
Page 3 OF 4
l
e house Home Furnishings LLC
Page 4 OF 4
Label Picture Description QTY
A Left Armrest/Leg 1
B Right Armrest/Leg 1
C Backrest 1
D Seat 1
Caution : You must read this before you proceed
Chair
Noble house Home Furnishings LLC
Page 1 OF 5
Label Picture Description QTY
Bolt (M6*40MM) 13
Washer 13
Allen Key 1
Overview
This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an
overview of the Chair parts, the above picture is to help you put the various parts into perspective.
Please read through the instructions below to familiarise yourself with the parts and steps before
assembly.
Before
Beginning
Assembly:
Backrest(C)
Seat(D)
Right Armrest/Leg(B)
FRONT FACING
x13
Noble house Home Furnishings LLC
Page 2 OF 5
Step 1
Step 2
Open the carton and place all the parts onto a clean, non-marring surface.
Attach Seat(D) to Right Armrest/Leg(B) using Bolts() And washer with Allen Key() as
shown above.
Do not fully tighten the Bolts.
Attach Backrest(C) to Right Armrest/Leg(B) using Bolts() and Washer () with Allen Key()as
shown above.
Do not fully tighten the Bolts.
Noble house Home Furnishings LLC
Page 3 OF 5
Step 3
Step 4
3.1) Attach the Left Armrest/Leg (A) to Backrest (C) using Bolts() and Washer ()with Allen
Key() as shown above.
3.2) Attach the Left Armrest/Leg (A) to Seat(D) using Bolts() and Washer () with Allen Key()
as shown above
Do not fully tighten Bolts.
Stand the Chair up. Place the Chair on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately connected. Gently and carefully, sit onto the
Chair. This will help to align all parts at all joints. Then get off the Chair, and in a sequential
manner, proceed to tighten all Bolts.
When tightening the Bolts, tighten sequentially.
DO NOT tighten any Bolt fully and then move on to the next one. This may cause the frame
to warp. If there are still wobbles, loosen the Bolts and execute the same process.
If the Chair is not stable it could lead to damage to the product.
Your Chair is ready for use.
This Chair can only be used on a flat and level surface.
3.2
3.1
Noble house Home Furnishings LLC
Page 4 OF 5
Noble house Home Furnishings LLC
Page 5 OF 5
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Noble House 305891 Operating instructions

Type
Operating instructions
This manual is also suitable for

Noble House 305891 is a versatile piece of furniture that combines a table and a chair in one. With its sturdy construction and easy assembly process, it's perfect for both indoor and outdoor use. The table can be used for dining, working, or as a coffee table, while the chair provides comfortable seating. Both the table and chair are adjustable, allowing you to customize them to your desired height. Additionally, the chair can be folded for easy storage or transportation.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI