Contec PT-970 Owner's manual

Brand: Contec

Model: PT-970

Type: Owner's manual

PT-970 Series

Preinstalled OS Recovery Procedures

This document describes the recovery procedures in a case where OS becomes unable to start up on a preinstalled-OS

system.

[Target OS]

- Windows 10 IoT Enterprise LTSB 2016 Multi Language (English/Japanese/Chinese/Korea)

- Before using a bundled recovery media, be sure to read the provided license agreements (END USER LICENSE

AGREEMENT about respective OS and Easy Restore license agreement). You can use this recovery media only if

you agree to the license descriptions.

- Use of the provided recovery media is allowed only for the purpose of restoring preinstalled OS. Using the media for

other purposes than OS recovery is prohibited.

- The content of the silicon disk returns to the state when our company is shipped by restoring it by recovery media.

Take the backup in important data beforehand.

- Company names and product names in this document are their trademarks or registered trademarks.

1. Require Devices

The Recovery uses USB connection’s DVD-ROM Drive. Please prepare a necessary equipment according to DVD-ROM

used.

- PT-970 series

- USB Keyboard

- USB Mouse

- USB DVD-ROM Drive

- Provided Recovery Media (inside package)

* Please remove if there is a storage device to the USB interface of the front body.

PT-970 Series

2. Recovery Procedures

2-1. CMOS Settings

Please set recovery media to a USB DVD -ROM drive, and connect with PC.

Turn on the power supply of PC and Press [DEL] key or [ESC] key immediately after turning on the power, activating Aptio

Setup Utility.

Step 1

Press F3 key, select [Load Optimized Defaults].

Please enter If the confirmation screen displayed.

And then, press [][] key, select [Yes] press [ENTER] key.

Step 2

Press [



][



] key, select [Boot] menu.

Please assign a DVD drive to "Boot Option #1"

Supplement

[UEFI: XXXXXXX] :

USB DVD-ROM Drive Name which connects is displayed.

When the drive of [UEFI: XXXXXXX] is not displayed, reboot once in Step 3 and display the Boot menu again.

Step 3

Press [F4] key, select [Save & Exit Setup].

Please [ENTER] key If you save configuration.

Main Advanced Chipset Boot Security Save & Exit

BIOS Information

Set the Date. Use Tab to

BIOS Vendor American Megatrends switch between Data elements.

Core Version

x.x.x.x

Compliancy UEFI x.x;PI x.x

Project Version

XXXXXXX

→←: Select Screen

↑↓: Select Item

Load Optimized Defaults?

Enter: Select

+/-:Change Opt.

F1: General Help

Yes No F2: Previous Values

F3: Load Defaults for Win7

F4: Save & Exit

F5: Load Defaults for Win10

Load Optimized Defaults

Main Advanced Chipset Boot Security Save & Exit

Boot Configration

Sets the system boot order

Setup Prompt Timeout 1

Bootup NumLock State

[On]

Quiet Boot

[Disabled]

First Boot [Disabled]

→←: Select Screen

↑↓: Select Item

Boot Option Priorities

Enter: Select

Boot Option #1 [UEFI: xxxxxxxxxx] +/-:Change Opt.

Boot Option #2 [Windows Boot Manage]

F1: General Help

Boot Option #3 [UEFI: Built-in EFI] F2: Previous Values

F3: Load Defaults for Win7

F4: Save & Exit

Main Advanced Chipset Boot Security Save & Exit

Boot Configration

Sets the system boot order

Setup Prompt Timeout

Bootup NumLock State [On]

Quiet Boot [Disabled]

→←: Select Screen

↑↓: Select Item

Save configration and exit? Enter: Select

+/-:Change Opt.

F1: General Help

Yes

No F2: Previous Values

F3: Load Defaults for Win7

F4: Save & Exit

Save & Exit Setup

PT-970 Series

2-2. Booting Recovery System

Step 1

When you receive the confirmation message, please

press Y key and ENTER key.

(If you do not continue the recovery, press N key.)

Step 2

Recovery is performed automatically.

Step 3

On the way, you will be asked for the second piece of

recovery media.

Replace the media and press the [ENTER] key.

Step 4

When finished, remove the recovery media from the

USB DVD - ROM drive and restart by pressing any

key.

Step 5

After power ON, press [DEL] key or [ESC] key immediately, Aptio Setup Utility starts.

Press F3 key, select [Load Optimized Defaults].

Please enter If the confirmation screen displayed.

[!!! WARNING !!!]

Initialize Storage.

Are you sure? [Y/N]

CImage Tool for Windows

Version x.x.x.x

Copy swm file : xxxxxxxx.swm

[xxx%] copied

Copy swm file : xxxxxxxx.swm

[100%] copied

Please Insert next disc [2/2] and type '[Enter]' key.

***********************************

Remove the System Restoration Disk

Press any key to reboot

***********************************

Main Advanced Chipset Boot Security Save & Exit

BIOS Information

Set the Date. Use Tab to

BIOS Vendor American Megatrends switch between Data elements.

Core Version

x.x.x.x

Compliancy UEFI x.x;PI x.x

Project Version

XXXXXXX

→←: Select Screen

↑↓: Select Item

Load Optimized Defaults?

Enter: Select

+/-:Change Opt.

F1: General Help

Yes No F2: Previous Values

F3: Load Defaults for Win7

F4: Save & Exit

F5: Load Defaults for Win10

Load Optimized Defaults

PT-970 Series

CONTEC CO., LTD. October 2018 Edition

3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan

https://www.contec.com/ NA06433 (LYWJ411)

[10262018]

No part of this document may be copied or reproduced in any form by any means without prior written consent

of CONTEC CO., LTD.

Step 6

Press [F4] key, select [Save & Exit Setup].

Please enter If you save configuration.

Step 7

The screen of the left figure is displayed after several times reboot.

Please elect the language used and advance installation of

Windows 10.

After recovery of Windows 10, please do installation and various

property setup of application and restore a system.

Please refer to the setup manual of an attached sheet “Setup

Procedure for Models with Pre-Installed OS”

Contec PT-970 Owner's manual

Contec PT-970 Owner's manual

Contec PT-970 Owner's manual

Related papers

Other documents