Contec PWX-150AWM2 is a power supply for FA-PAC (PCI) series exchange. It includes a power supply unit, a power cord, and a user's manual. To replace the old power supply unit with the new one, follow these steps:
Remove the power cord from the chassis, then open the cover by removing the screws that hold it in place.
Remove the power connectors from the fan and backplane.
Remove the screws that hold the power supply unit in place and remove it. The old power supply unit can be replaced with the new one in the reverse order of the above steps.
Contec PWX-150AWM2 is a power supply for FA-PAC (PCI) series exchange. It includes a power supply unit, a power cord, and a user's manual. To replace the old power supply unit with the new one, follow these steps:
Remove the power cord from the chassis, then open the cover by removing the screws that hold it in place.
Remove the power connectors from the fan and backplane.
Remove the screws that hold the power supply unit in place and remove it. The old power supply unit can be replaced with the new one in the reverse order of the above steps.
Contec PWX-150AWM2 is a power supply for FA-PAC (PCI) series exchange. It includes a power supply unit, a power cord, and a user's manual. To replace the old power supply unit with the new one, follow these steps:
Remove the power cord from the chassis, then open the cover by removing the screws that hold it in place.
Remove the power connectors from the fan and backplane.
Remove the screws that hold the power supply unit in place and remove it. The old power supply unit can be replaced with the new one in the reverse order of the above steps.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI