If you have any difficulties, please refer to the instruction manual.
3
2
5
6
4
1
Remove all packaging from the DVD player. Retain the packaging.
If you dispose of it please do so according to any local regulations.
(P.N.: 1-3010-A599-0002-R)
Install the batteries correctly by following the polarity (+ and -)
indications in the battery compartment.
Congratulations on the purchase of your new
Sandstrøm DVD Player.
Your new DVD player incorporates the latest technology to enhance your viewing
experience. Please follow this guide for a successful first time installation.
Well done, your new DVD Player is now ready
to use.
You will find that there are many exciting features available. To get to know all
these features, please take some time to read the instruction manual provided
with your DVD player.
Quick Start Guide
DVD Player
S1HDVD10
DVD Player
Instruction Manual Quick Start Guide
Remote Control
Product OverviewUnpacking
Operating Your Remote Control Connections
Connecting to the Mains Socket
1. Press and lift the back cover up to open the
battery compartment of the remote control.
2. Insert two AAA size batteries (not supplied).
3. Close the battery compartment cover.
3
2
1
DVD Player
Rear Panel
Remote Control
STANDBY/ON
button
Disc Tray
LED Screen
Remote Control
Sensor
PLAY/
PAUSE button
USB
Interface
STOP
button
OPEN/CLOSE
button
Power Indicator
Power Line
Input
HDMI
Output
SCART
Output
2 Channels
Audio Output
STANDBY
0–10+
CURSOR
ANGLE
MENU
PROG
NEXT
MUTE
PREV
AUDIO
VOLUME +/–
CLEAR
DVD/USB
OSD
(On screen Display)
SUBTITLE
REPEAT
SETUP
ZOOM
TITLE
SEARCH
A-B REPEAT
OPEN / CLOSE
ENTER / PLAY
F.REV
F.FWD
PAUSE / STEP
/
STOP
To SCART input
Television
Stereo system
HDMI cable
SCART cable
AUDIO cable
To SCART output
Method 1
Method 2
Method 3
White
White
Red
To audio inputs of
the amplifier
Red
1. Plug in the mains plug into the mains socket after you
have completed all the connections.
2. Press the STANDBY / ON button on the remote
control to switch on the DVD player.
3. Turn on the TV, select the video input connected to
the DVD player.
Basic Playback
1. Press the OPEN / CLOSE button to open the disc tray, place a disc with
the label facing up.
2. Press the OPEN / CLOSE button again to close the disc tray.
3. If the disc does not start playing automatically, press the ENTER / PLAY
button.
4. Some discs may start playback with a menu. Use the buttons on
the remote control to select menu options and press the ENTER / PLAY
button to start, or press digits to select a menu options directly.
5. To eject the disc, press the OPEN / CLOSE button.
STANDBY/ON
USB
PLAY/PAUSE STOP
SEARCH
REPEAT A-B RPT
MENU
CLEA ANGLER
VOLUME
MUTEAUDIO
F.FWDF.REV NEXTPREV
ZOOM
SETUP
1 2
3
4
5
6
7 8 9
0 10+
SUBTITLE
OSD
PROG
TITLE
STOP
PAUSE/STEP
/
DVD/USB
SEARCH
REPEAT A-B RPT
MENU
CLEA ANGLER
VOLUME
MUTEAUDIO
F.FWDF.REV NEXTPREV
ZOOM
SETUP
1 2
3
4
5
6
7 8 9
0 10+
SUBTITLE
OSD
PROG
TITLE
STOP
PAUSE/STEP
/
DVD/USB
STANDBY/ON
USB
PLAY/PAUSESTOP
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Currys Essentials C1DVDB12 Quick start guide
-
Hitachi DVP435E User manual
-
Logik L2HDVD11 User manual
-
-
Eltax DV-150 User manual
-
Lenco DVD29 Datasheet
-
Vitek VT-4119SR Operating instructions
-
-
-
Akura ADDS303 User manual