Holdrite 280-H Installation guide

Type
Installation guide

This manual is also suitable for

4.35
1.21
3.88
2.50
.75
3.98
.85
.93
1.57
2" Pipe
ALL DIMENSIONS IN INCHES
800-321-0316 OR 760-744-6944 / FAX: 760-744-0507 / WWW.HOLDRITE.COM
spec_280_RevK
PRODUCT SPECIFICATION DRAWING
HOLDRITE® Stout Clamp™ #280
Sound rated variable closure clamp that may be installed to HOLDRITE® EZ-Strut™
or Stout Brackets™ with only one to three screws (for maximum load in suspension
mode). Two acoustical inserts isolate the pipe from the supporting structure, reducing
waterline noise and vibration, while allowing normal pipe expansion and contraction.
Variable closure clamp supports 1" - 2" CTS and IPS pipe sizes. Supports Copper,
PEX, CPVC tubing, conduit, etc. Frame complies with UL94V-2 flame rating.
Product Information:
Material:
Top & Bottom Clamp: Nylon, medium blue, FR UL94V-2
Pads: TPR, natural (off-white), 50 shore A
Temperature range: -10
F to +180
F
Load rating: 75 lbs in suspended mode, 300 lbs maximum in top mount
Patent Pending
UPC / IPC / IAPMO listed
THIS INFORMATION IS PROPRIETARY TO HOLDRITE AND IS SUBJECT
TO CHANGE WITHOUT NOTICE. IT MAY NOT BE REPRODUCED IN
PART OR WHOLE WITHOUT WRITTEN AUTHORIZATION.
  • Page 1 1

Holdrite 280-H Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI