DuraHeat DH-20 Operating instructions

Type
Operating instructions
DELUXE
BATTERY POWERED
SIPHON PUMP
OPERATING INSTRUCTIONS
1. INSERT BATTERIES AS SHOWN.
2. IMMERSE THE INTAKE (NON-
FLEXIBLE) TUBE INTO THE SENDING
CONTAINER.
3. INSERT DISCHARGE
(
FLEXIBLE) HOSE INTO THE
RECEIVING CONTAINER OR FUEL TANK
(HEATER)
4. TURN SWITCH ON - DO NOT
LEAVE PUMP UNATTENDED
D
URING OPERATION - TURN
SWITCH OFF BEFORE OVERFILLING.
5. CLEAN UP ANY SPILLED FLUIDS
AND DISPOSE OF CLEANING
MATERIALS OUTSIDE THE LIVING
AREA .
6. STORE THE SIPHON PUMP OUTSIDE
THE LIVING AREA WITH HANDLE IN
UPWARD POSITION. REMOVE
BATTERIES.
CAUTIONS
1. DO NOT RUN DRY. ONLY SWITCH ON
AFTER SUBMERGING THE
BOTTOM OF PUMP IN KEROSENE.
2. DANGER: DO NOT
USE WITH
GASOLINE, PAINT THINNER, CHEMICAL
SOLVENTS OR OTHER FLAMMABLE
LIQUIDS. ACCEPTABLE FOR USE WITH
NON-FLAMMABLE LIQUIDS SUCH AS
KEROSENE, SOAPS, ETC.
3. WHEN USING WITH A KEROSENE
HEATER-
* ALWAYS TURN HEATER OFF AND
ALLOW TO COOL BEFORE
REFUELING.
* FUEL HEATER OUTDOORS.
CLEAN UP ANY SPILLS.
4. DO NOT
LEAVE UNATTENDED DURING
USE.
5. DO NOT
TAPE THE BUTTON TO
REMAIN IN THE “ON” POSITION.
Made in China
BATTERIES
DISCHARGE HOSE
SENDING
CONTAINER
INTAKE TUBE
O
N
OFF
B
ATTERY CASE
S
WITCH
TURN COUNTER
CLOCKWISE
  • Page 1 1

DuraHeat DH-20 Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI