Hanover HANPERG10X10-GRY User guide

Hanover
Brand
Hanover
Model
HANPERG10X10-GRY
Type
User guide

Hanover HANPERG10X10-GRY is a pergola, a garden structure that provides shade and support for climbing plants. It is made of aluminum alloy, which is lightweight and resistant to rust. The pergola measures 115 inches by 115 inches by 90 inches, and it can be assembled in about 1.5 hours. It comes with a fabric roof that is flame-resistant and can be easily cleaned with a mild detergent solution. The pergola is designed to be fixed to a flat, level surface, and it can be used to create a shaded area for outdoor activities such as dining, relaxing, or gardening.

Hanover HANPERG10X10-GRY is a pergola, a garden structure that provides shade and support for climbing plants. It is made of aluminum alloy, which is lightweight and resistant to rust. The pergola measures 115 inches by 115 inches by 90 inches, and it can be assembled in about 1.5 hours. It comes with a fabric roof that is flame-resistant and can be easily cleaned with a mild detergent solution. The pergola is designed to be fixed to a flat, level surface, and it can be used to create a shaded area for outdoor activities such as dining, relaxing, or gardening.

Do not tighten the steps until completing assembly of all parts.
size/cm:292×192×228
PERGOLA
Instruction manual
IMPORTANT
You must read these instructions carefully before you start to assemble this PERGOLA .Please ensure that you find all parts
in the carton box in the correct type and quantity as mentioned in the list illustrated in every page accordingly.
Please carry out the steps in the order set out in these instructions.
Keep these instructions in a safe place for future reference.
size/inch:115×115×90
9820301
10.Phillips screwdriver
9.Knife
Percussion bit(10mm)
fabric.
This is a multi-part assembly, Allow at least 1.5 hours for assembly.
Keep children away from the assembly area.
When your PERGOLA needs cleaning, use a mild detergent solution and rinse
!
SAFETY ADVICE
We strongly recommend the use of work gloves during assembly.
Do not attempt to assemble the PERGOLA in windy or wet conditions,
Do not touch overhead power cables with the aluminum profiles.
The PERGOLA must be positioned and fixed on a flat level surface.
Do not lean against or push the PERGOLA during construction.
Do not position your PERGOLA in an area exposed to excessive wind.
Do not attempt to assemble this PERGOLA if you are tired ,have taken drugs
or alcohol or if you are prone to dizzy spells.
If using a step ladder or power tools ensure that you follow the manufacturer's safety advice.
Hot items such as recently used grills, blowtorches etc.must not be stored in the
PERGOLA.
Ensure there are no hidden pipes or cables in the ground before inserting the pegs.
GENERAL ADVICE
Selecting a site-choose a sunny level position away from overhanging trees.
If you are fixing your PERGOLA directly to a solid concrete foundation use the
predrilled holes in the metal base supplied.
The component parts should be checked and laid out close to hand.
Keep all small parts(screws etc)in a bowl so they do not get lost.
Note that the door is hinged on the right hand side and therefore opens to the right.
Keep roof clear from snow and leaves.
CARE & MAINTENANCE
with cool clean water.
Do NOT use acetone, abrasive cleaners or other special detergents to clean the
-2-
Dispose of all plastic bags safely and keep them out of reach of children.
Always wear shoes and safety goggles when working with extrded aluminum.
Installation Tool:
5.Electric screwdriver+5mm Hexagon
2.Spanner 10mm/(25/64) (Ratchet Wrench is better)
1.Triangle Stairs≈
3.Spanner 14mm/(35/64) (Install the expansion screw)
4.Hexagon wrench 5mm(13/64)inch
wrench (suggest)
6.Wooden Mallet
7.Marking Pen
4.9 Feet Height
(13/64)inch
2.Angle Square
3.Level Meter
(16.4Feet)
1.Tape Measure
8.
(25/64")
Measurement Tools
PRODUCT SIZE
-3-
PARTS LIST
NO.
Qty.
1 2
2 2
3 4
6 1
7 2
8 1
9 1
B1 4
S1 11
S3 10
S5 4
S6 1
B2 15
B3 15
B15 16
NO.
Qty.
NO.
Qty.
F1 16
F2 32
F3 2
F4 3
T5(13/64)
M6(15/64)
M6(15/64)
M6(15/64)
228cm / 90inch
207cm / 81.5inch
292cm / 115inch
292cm / 115inch
238cm / 94inch
238cm / 94inch
2200mm/86.6"
2760mm/108.6"
2439mm
96"
Make sure you choose the correct installation location
Schematic diagram of Aluminum frames
-4-
1
1
2
2
B1
B1
B1
B1
S3
S3
S3
S3
S3
S3
S3
S3
S3
S3
S5
S5
S5
S5
S6
9
3
3
3
3
6
8
7
7
-5-
1 x2
2 x2
3 x2
B1 x4
F1 x16
F2 x16
比例 25.400
比例 25.400
x4
Ⅰ
2
1
B1
F1
F1
F1
F1
x2
Ⅱ
3
F2x4
F2x4
3
1
2
3
F2x4
Columns Assembly
Column,Beam and Rails
-6-
3 x2
7 x2
F2 x16
S1 x10
7
7
3
3
S1 x5
S1 x5
S1 x5
7
3
x2
Ⅰ
3
7
S1
1
1
2
2
3
7
F2 x4
F2 x4
3
3
1
2
x2
Ⅱ
Installation
Fabric Rails Installation
Column,Beam and Rails
-7-
S1
6
8
F3 x2
6
8
F3
F3
Ⅰ
6
8
S1
8
6
S1 x1
F3
F3
6
6
8
8
3
3
Ⅱ
Installation
-8-
F4 x3
S3 x10
S5 x4
S6
S3
S3
S3
S3
S3
S3
S3
S3
S3
S5
S5
S5
S5
S6
S3
x2
Ⅰ
S3
6
x4
Ⅱ
S3
S3
1
3
3
7
S5
1
S6
F4
Ⅲ
B15 x16
Ⅳ
x4
B15 x4
B1
B1
B1
B1
B1
B15 x4
B15 x4
B15 x4
B15 x4
Plastic Column Caps Installation
-9-
B2 x15
B3 x159
9
x15
Ⅰ
x15
Ⅱ
9
B2
B3
B2
B3
1
S6
Fabric Installation
4.Close the fabric via pulling the rope and bind the rope on hook S6 fixed on one of the columns.
To fix the columns, use a strong rope or cable and connect to the four angles of the
the columns.
3.Clear any leaves and branches on top of pergola to prevent the fabric from damage and dirty.
2.The fabric have flame polyester material applied to them and is recommended to keep away from
fire to avoid damage.
3.Avoid any vine/climbing plants, fruits, or vegetables from growing on the pergola as to not
Fabric Maintenance:
-10-
1.WARNING: If there is lightening, do not stay in or under the product. The frames are constructed of aluminum alloy, which
2.If there is any distorting with the calibration, please fix immediately. Any distortion can cause the skylight to fall.
1.The frames are made of aluminum alloy structure. If white spots or dirt is shown, please wipe with a wet cloth.
1.When using the product, please do not use sharp objects on collision films to avoid cuts. Be careful not to have a sharp
Maintenance:
1.If the ground is not level, the unit may tilt to one side. If you find this is the case, please fix immediately to avoid damage.
2.Please prevent adding any increased weight to the product.
compromise the structure
and durability of the product. If the structure is compromised, it can easily cause the frame to
crack, break, or collapse.
object touch the film as it may scratch.
Frame Maintenance:
3.If any connection piece rusts, change out the screws to ensure the connection part is firm and stable.
White spots are normal in a wet/warm environment.
Please refer to the instruction manual for repairs.
Weather Protection:
is conductive, and may cause serious damage.
2.When wind power reaches 40mph or above, you may need to set up defense equipment and fix
anchors with a block
inserted into the
soil or tied to a nearby tree at least 4in.in diameter. When
wind decreases, please remove safety measures of ropes.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Hanover HANPERG10X10-GRY User guide

Hanover
Brand
Hanover
Model
HANPERG10X10-GRY
Type
User guide

Hanover HANPERG10X10-GRY is a pergola, a garden structure that provides shade and support for climbing plants. It is made of aluminum alloy, which is lightweight and resistant to rust. The pergola measures 115 inches by 115 inches by 90 inches, and it can be assembled in about 1.5 hours. It comes with a fabric roof that is flame-resistant and can be easily cleaned with a mild detergent solution. The pergola is designed to be fixed to a flat, level surface, and it can be used to create a shaded area for outdoor activities such as dining, relaxing, or gardening.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents