Better Music Builder M-12 Owner's manual

Better Music Builder
Brand
Better Music Builder
Model
M-12
Category
Audio amplifiers
Type
Owner's manual

This manual is also suitable for

Better Music Builder M-12 is a versatile audio system designed to cater to various sound reinforcement needs. Its modular design allows for flexible configurations, making it suitable for a wide range of applications, from small gatherings to larger events.

The M-12 Column Speaker, with its eight mid & high drivers, delivers crystal-clear audio with a wide frequency response. Its lightweight aluminum enclosure and compact design make it easy to transport and set up.

The M-12 SUB is the powerhouse of the system, featuring a built-in power amplifier and a 12" woofer that provides deep, impactful bass. Its digital amplifier with DSP and multiple outputs allows for easy integration with other speakers.

Better Music Builder M-12 is a versatile audio system designed to cater to various sound reinforcement needs. Its modular design allows for flexible configurations, making it suitable for a wide range of applications, from small gatherings to larger events.

The M-12 Column Speaker, with its eight mid & high drivers, delivers crystal-clear audio with a wide frequency response. Its lightweight aluminum enclosure and compact design make it easy to transport and set up.

The M-12 SUB is the powerhouse of the system, featuring a built-in power amplifier and a 12" woofer that provides deep, impactful bass. Its digital amplifier with DSP and multiple outputs allows for easy integration with other speakers.

Thank you for purchasing this unit. To
make full and effective use of this unit,
please read this Owner's Manual
carefully before operating it. Please
retain this manual for future reference.
w w w.BetterMusicBuilder.com
OWNER'S MANUAL
Better Music Builder
®
is a leader in the Audio and
Karaoke equipment industry. We are committed to
offering you high quality audio products. Unlike any others
brand, we deliver the best cost and value to you directly.
For the latest update information including operation
manuals, installation instructions, hook-up diagram and
other new technologies updates etc. please visit us at our
website www.Bet terMusicBuilder.com.
Better Music Builder .com
®
Passionate about Music
It’s what we do!
LINE ARRAY SERIES
PRO - L in e L o u d s p e a ke r
110421
M-12 M-12
M-12 SUB / M-12 NP
2
CONTENTS
INTRODUCTION............................................................................................................................................... 3
SYSTEM FEATURES
........................................................................................................................................... 3
SAFETY INSTRUCTIONS
............................................................................................................................. 4~5
SYSTEM APPLICATIONS
.................................................................................................................................. 6
• Speakon Connector
................................................................................................................................................ 6
• Connection Method 1
........................................................................................................................................... 7
• Connection Method 2
........................................................................................................................................... 8
• Connecting Control Software to M-12 SUB (Active/powered)
.............................................................. 9
CONTROLS AND FUNCTIONS
..................................................................................................................... 10
• Front & Rear Panel of Column Speaker M-12
............................................................................................ 10
• Front & Rear Panel of Passive/Non-powered Subwoofer M-12 NP
................................................... 10
• Front & Rear Panel of Active/Powered Subwoofer M-12 SUB
............................................................. 11
SYSTEM SETUP GUIDELINES
........................................................................................................................ 12
• Installation Setup
.................................................................................................................................................... 12
1. Mounting the Speaker to the Wall
................................................................................................. 12
2. Placing the Speakers on the Speaker Mounting Pole
.............................................................. 13
3. Placing the Speakers on the Portable Stand
............................................................................... 13
4. Setup Speaker System
......................................................................................................................... 13
PROFESSIONAL/COMMERCIAL USE
.................................................................................................... 14~19
PHYSICAL DIMENSIONS
............................................................................................................................... 20
SPECIFICATIONS
.............................................................................................................................................. 20
TROUBLESHOOTING
............................................................................................................................... 22~23
WARRANTY
...................................................................................................................................................... 24
AGENCY REGULATORY NOTICES
............................................................................................................... 25
FINAL WORDS TO USER
............................................................................................................................... 26
CONTACT INFORMATION
............................................................................................................................ 26
Safety
Applications
Intro
Features
Set Up
Speaker
Troubleshooting
Final Words
Final Words
Warranty
Notices
Contact Us
Spec
Dimensions
PRO
3
INTRODUCTION
Better Music Builder introduces the sleek new M-12 Series
Speakers. The main feature of the series is that these speak-
ers are designed to accommodate various setups based on
customer preference. From small to large formats these
speakers can be mixed and matched with ease of use. The
compatibility with the M-12 Series Speakers is perfect for
custom audio setups and intricate designs.
The M-12 SUB is the workhorse of the series. The 1400W
active subwoofer has more than enough power to power
passive speakers such as the M-12 Column Speakers and
the M-12 NP, allowing for the perfect complete stereo
system. Each M-12 Column Speaker uses a total of eight mid
& high drivers to produce crystal clear audio rated at 200
watts RMS. And the 300 watts rated M-12 NP, with its
lightweight design, can be transported with ease.
The newly designed subwoofers M-12 SUB and M-12 NP
utilize their own enclosures to accommodate various setups.
They can be placed in stand or flat position thanks to rubber
feet on bottom and side and also features mounting
locations for additional subwoofers. Like the subwoofer
cabinets, the M-12 Column Speakers also have mounting
locations to allow additional speakers to be mounted. With
these features the Better Music Builder M-12 Series Speakers
can be built to preference and setup capacity, making a
very adaptable series speakers for the consumer.
Intro
Features
M-12 PACKAGE CONTENTS:
• Column Line Array: 2 pcs
• Connection Pole: 2 pcs
• Instructional Manual: 1 pc
• Warranty & Registration Card: 1 pc
M-12 SUB PACKAGE CONTENTS:
• Active/Powered Subwoofer: 1 pc
• AC-Power Cable: 1 pc
• Speakon Cable: 1 pc
• Software CD: 1 pc (Optional)
• Instructional Manual: 1 pc
• Warranty & Registration Card: 1 pc
M-12 NP PACKAGE CONTENTS:
• Passive/Non-powered Subwoofer: 1 pc
• Speakon Cable: 1 pc
• Instructional Manual: 1 pc
• Warranty & Registration Card: 1 pc
SYSTEM FEATURES
COLUMN SPEAKER M-12
• 2-Way full range speaker
• 8 x 3” tweeter [0.8” voice oil mid/high unit]
• Lightweight aluminum enclosure
• Multi combinations and installations ways
• Delivering a smooth full frequency spectrum sound
• Portable/Compact Design
• Handling power: 200 Watts (RMS), 800 Watts (PEAK)
• 4 x Speakon NL4 connector
• Protective grill: black perforated steel
• Applications:
Restaurants, clubs, bars, conference rooms, churches,
schools and homes
ACTIVE/POWERED SUBWOOFER M-12 SUB
• 1 x 12” woofer [3“ voice coil low frequency woofer]
• Built-In power amplifier
• Portable/Compact Design
• Digital amplifier with DSP and two outputs
• Link input & output
• Line input & output (XLR)
• 2 x Speakon NL4 connector
• Convenient handle on subwoofer box
• Power output: 2 x 700 Watts @ 4 Ohm
• Protective grill: black perforated steel
• Applications:
Restaurants, clubs, bars, conference rooms, churches,
schools and homes
PASSIVE/NON-POWERED SUBWOOFER
M-12 NP
• 1 x 12” woofer [3“ voice coil low frequency woofer]
• Portable/Compact Design
• Compact vented sub-bass
• 2 x Speakon NL4 connector
• Convenient handle on subwoofer box
• Handling power: 300 Watts (RMS), 1,200 Watts (PEAK)
• Protective grille: black perforated steel
• Applications:
Restaurants, clubs, bars, conference rooms, churches,
schools and homes
LINE ARRAY SERIES
PRO - Lin e L o u d s p e ake r
4
SAFETY INSTRUCTIONS
We will not notify you any errors or changes in this manual in
advance. If there are any errors and changes in this manual,
we will make the corrections in a timely manner. The
corrections and changes will be on our website. Therefore,
please visit our website at BetterMusicBuilder.com frequently
to find out the most updated information, corrections on errors
and changes in this manual. You may also contact us at toll
free at 1-800-318-2218.
CAUTIONS FOR INSTALLATION
POWER SUPPLY / POWER CORD
• Only use the voltage specified as correct for the device.
The required voltage is printed on the name plate of the
device.
• Use only the included power cord.
• Do not place the power cord near heat sources such as
heaters or radiators, and do not excessively bend or
otherwise damage the cord, place heavy objects on it, or
place it in a position where same could walk on, trip
over, or roll anything over it.
• Remove the electric plug from the outlet when the device is
not to be used for extended periods of time, and during
electrical storms.
• When removing the electric plug from the device or an
outlet, always hold the plug itself and not the cord. Pulling
by the cord can damage it.
DO NOT OPEN
• Do not open the device or attempt to disassemble the
internal parts or modify them in any way. The device
contains no user-serviceable parts. If it should appear to
be malfunctioning, discontinue use immediately and have
it inspected by qualified Better Music Builder service
personnel.
WATER WARNING
• Do not expose the device to rain, use it near water or in
damp or wet conditions, or place containers on it
containing liquids which might spill into an openings.
• Never insert or remove an electric plug with wet hands.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
Safety
ABNORMALITY
• If the power cord or plug becomes frayed or damaged,
or if there is a sudden loss of sound during use of the
device, or if any unusual smells or smoke should appear to
be caused by it, immediately turn off the power switch,
disconnect the electric plug from the outlet, and have the
device inspected by qualified Better Music Builder service
personnel.
• If this device should be dropped or damaged, immediately
turn off the power switch, disconnect the electric plug from
the outlet, and have the device inspected by qualified
Better Music Builder service personnel.
LOCATION
• Always consult qualified Better Music Builder service
personnel if the device installation requires construction
work, and make sure to observe the following precautions.
• Choose mounting hardware and an installation location
that can support the weight of the device.
• Avoid locations that are exposed to constant vibration.
• Inspect the device periodically.
• When transporting or moving the device, always use two
or more person. Attempting to lift the device by yourself
may damage your back, result in other injury, or cause
damage to the device itself.
• Before moving the device, remove all connected cables.
• Do not use the device in a confined, poorly-ventilated
location. If this device is to be used in a small space
other than an EIA-standard rack, make sure that there is
adequate space between the device and surrounding
walls or other devices: at least 30cm at the sides, 30cm
behind and 30cm above. Inadequate ventilation can
result in overheating, possibly causing damage to the
device(s), or even catch fire.
NO GOOD
5
NOTE
NOTE
• Do not use the speaker’s handles for suspended installation.
Doing so can result in damage or injury.
• Do no expose the device to excessive dust, vibrations,
extreme cold or heat (such as in direct sunlight, near a
heater, or in a car during the day) to prevent the possibility
of panel disfiguration or damage to the internal
components.
• Do not place the device in an unstable position where it
might accidentally fall over.
CONNECTIONS
• Before connecting the device to other devices, turn off the
power for all devices. Before turning the power on or off
for all devices, set all volume levels to minimum.
CAUTION
• When turning on the AC power in your audio system,
always turn on the device LAST, to avoid speaker damage.
When turning the power off, the device should be turned
off FIRST for the same reason.
• Do not insert your fingers or hands in any gaps or
openings on the device (ports, etc.).
• Avoid inserting or dropping foreign objects (paper, plastic,
metal, etc.) into any gaps or openings on the device
(ports, etc.). If this happens, turn off the power immediately
and unplug the power cord from the AC outlet. Then
have the device inspected by qualified Better Music
Builder service personnel.
• Do not use the device for a long period of time at a high
volume level, since this can cause permanent hearing loss.
If you experience any hearing loss or ringing in the ears,
consult a physician.
• Do not operate the device if the sound is distorting.
Prolonged use in this condition could cause overheating
and result in fire.
• Do not rest your weight on the device or place heavy
objects on it, and avoid using excessive force on the
buttons, switches or connectors.
GETTING STARTED
WIRING
IMPORTANT: Make sure all equipments are turned off before
making any connections.
For speaker connections, use a high-quality speaker wire with
polarity coding. The side of the wire with a ridge or other
coding is usually considered positive polarity.
If desired, consult Better Music Builder technical
support for speaker wire and connection options.
The speakers have coded terminals that accept a variety or
wire connectors.
To ensure proper polarity, connect each + terminal on the
back of the amplifier or receiver to the respective + (red)
terminal on each speaker. Connect the – (black) terminals in
a similar way. See the owner’s guides that were included
with your amplifier, receiver and television to confirm connec-
tion procedures.
IMPORTANT: Do not reverse polarities (i.e., + to – or – to +)
when making connections. Doing so will cause poor imaging
and diminished bass response.
ADJUSTING
Check the speakers for playback, first by setting the system
volume control to a minimum level, and then by applying
power to your audio system. Play a favorite music or video
segment and increase the system volume control to a comfort-
able level.
You should hear balanced audio reproduction across
the entire frequency spectrum. If not, check all wiring connec-
tions or consult the authorized dealer from whom you
purchased the system for more help.
The amount of bass you hear and the stereo-image quality
will be affected by a number of different factors, including the
room’s size and shape, the construction materials used to
build the room, the listener’s position relative to the speakers,
and the position of the speakers in the room.
Listen to a variety of music selections and note the bass level.
If there is too much bass, move the speakers away from
nearby walls. Conversely, if you place the speakers closer to
the walls, there will be more bass output.
CARING
Each enclosure has a finish that does not require any routine
maintenance. When needed, use a soft cloth to remove any
fingerprints or dust from the enclosure or grille.
6
OUTPUT INPUT
2+
1+
2–1–
TO
AMPLIFIER
Connector Panel
OUTPUT INPUT
2+
1+
2–1–
TO
AMPLIFIER
FULL
RANGE
BI-AMP
LF
HF
Connector Panel on Multi-Way Systems
OUTPUT INPUT
PASSIVE BI-AMPLING
INPUT PASSIVE OUTPUT
2+ 2+
2– 2–
1+ 1+
1– 1–
SUB
WOOFER
INPUT BI-AMPLING OUTPUT
2+ 2+
2– 2–
1+ 1+
1– 1–
SUB
WOOFER
Connector Panel on Subwoofers
EXAMPLE OF SPEAKON CONNECTOR
There are two groups on the speakon connectors: Group 1
(+1,
–1) and Group 2 (+2, –2) as indicated in the diagram. In
order to use it, your speaker must have multi-functions (i.e.
enable two sources of signal for input). If your speaker does
not have multi-functions, it would not work with the Group 2
for connection. Please refer to the following diagram for
connection.
SYSTEM APPLICATIONS
Applications
Speakon Outputs
The upper Speakon jack has both Channel 1 and
Channel 2 outputs, so it is especially useful for parallel,
bi-amp, or BRIDGE mono operation. The other Speakon
carries only Channel 2's output. See the illustrations at
above.
SPEAKON Y CONNECTORS
INPUT OUTPUT
L
O
C
K
L
O
C
K
TO CHANNEL 2
SPEAKER
TO CHANNEL 1
SPEAKER
2–
1–
1+ 2+
REFERENCE CONNECT
8
4
2
+
–
8
4
2
–
+
SPEAKON CONNECTORS
INPUT OUTPUT
L
O
C
K
L
O
C
K
SOURCE
(from active/powered)
BRIDGE
2–
1–
1+ 2+
REFERENCE CONNECT
8
4
2
+
–
Source (INPUT) comes from the output source of the
active/powered speaker while the bridge (OUTPUT)
connects to the passive/non-powered speaker.
A speakon cable is required to connect the “OUTPUT”
of the acive/powered speaker to the “INPUT” of the
passive/non--powered speaker. Please order the speakon
cable from our authorized dealers.
NOTE
M-12
COLUMN
SPEAKER
M-12
COLUMN
SPEAKER
M-12
COLUMN
SPEAKER
M-12
COLUMN
SPEAKER
INPUT / LINK A
± 1
A ± 2 B ± 2
± 2
INPUT / LINK B
± 1
A ± 2 B ± 2
± 2
INPUT / LINK A
± 1
A ± 2 B ± 2
± 2
LINK VOLUME
CLIP
ON
POWER:700W+700W
LINE OUTPUT LINE INPUTINPUT OUTPUT
LEFT OUTPUT
Column Speaker
MIN. 4 Ω
RIGHT OUTPUT
Passive Subwoofer
MIN. 8 Ω
7
CONNECTION METHOD 1
M-12 NP
PASSIVE/NON-POWERED
SUBWOOFER
M-12 SUB
ACTIVE/POWERED
SUBWOOFER
M-12 SUB REAR VIEW M-12 NP REAR VIEWM-12 NP REAR VIEW
POWER: 300W (RMS), IMPEDANCE: 8 Ω
392160811350
CALIFORNIA, UNITED STATES OF AMERICA
E- ma il : s al es @b et t erm us ic bu ild er.c om
w w w . B e t t e r M u s i c B u i l d e r . c o m
EN G INEERED AND DESIGN IN U.S. A.
OUTPUTINPUT
SERIAL NO.
SERVER
(MUSIC DATA)
KARAOKE
TOUCH SCREEN TS19
VIDEO DISPLAY TV
HDMI VIDEO
MIXER DX-8000
MIC 2MIC 1 MIC 3
MIC. I NPUT
Better Music Builder
®
Passio nat e ab out Musi c
IR
FEEDBAC K
AUDIO VIDEO EFFE CTS P ROCES SOR DX-8000
High D efini tion Live Sound
MIC
EFFECT
MUSIC
EQ
GAIN
BACK
DELAY
LIMITE R
SYSTEM
POLARI TY
X-OVER
PROGRA M
OUTPU T LE VEL
CLIP
LIMIT
0dB
-12dB
-24dB
EDIT
CLIP
LIMIT
0dB
-12dB
-24dB
EDIT
KARA OKE P ROCES SOR
PROF AUDI O
ENTER / ES C
MIC. V OLUM E
MIC 1/4 MIC 2/5 MIC 3
LEFT RIG HT
GROUP- A
LEFT RIG HT
GROUP- B
CENTER
MONITOR
SUB
BASS
Soft war e
Suit e
USB
to PC
MUSIC SOURCE
CD/DVD PLAYER
VIDEO1
VIDEO2
VGA-OU T
L
L
R
R
RECORD
AUDIO OUT
SPDIF
HDMI
HEADPH ONE
EXT-IR
MOUSE
USB1
LAN
USB2
POWER
VOLUME
—
+
Sk y Media
SKY MEDIA PLAYER
LINK VOLUME
CLIP
ON
POWER:700W+700W
LINE OUTPUT LINE INPUTINPUT OUTPUT
LEFT OUTPUT
Column Speaker
MIN. 4 Ω
RIGHT OUTPUT
Passive Subwoofer
MIN. 8 Ω
M-12 SUB REAR VIEW
LINK VOLUME
CLIP
ON
POWER:700W+700W
LINE OUTPUT LINE INPUTINPUT OUTPUT
LEFT OUTPUT
Column Speaker
MIN. 4 Ω
RIGHT OUTPUT
Passive Subwoofer
MIN. 8 Ω
M-12 SUB REAR VIEW
M-12
COLUMN
SPEAKER
M-12
COLUMN
SPEAKER
M-12
COLUMN
SPEAKER
M-12
COLUMN
SPEAKER
8
INPUT / LINK A
± 1
A ± 2 B ± 2
± 2
INPUT / LINK B
± 1
A ± 2 B ± 2
± 2
INPUT / LINK A
± 1
A ± 2 B ± 2
± 2
CONNECTION METHOD 2
M-12 SUB
ACTIVE/POWERED
SUBWOOFER
M-12 SUB
ACTIVE/POWERED
SUBWOOFER
EX-8
8-CHANNEL MULTI EFFECTS MIXER
9
CONNECTING CONTROL SOFTWARE TO M-12 SUB (ACTIVE/POWERED)
LINK VOLUME
CLIP
ON
POWER:700W+700W
LINE OUTPUT LINE INPUTINPUT OUTPUT
LEFT OUTPUT
Column Speaker
MIN. 4 Ω
RIGHT OUTPUT
Passive Subwoofer
MIN. 8 Ω
M-12 SUB REAR VIEW
LINK VOLUME
CLIP
ON
POWER:700W+700W
LINE OUTPUT LINE INPUTINPUT OUTPUT
LEFT OUTPUT
Column Speaker
MIN. 4 Ω
RIGHT OUTPUT
Passive Subwoofer
MIN. 8 Ω
M-12 SUB REAR VIEW
M-12
COLUMN
SPEAKER
M-12
COLUMN
SPEAKER
M-12 SUB
ACTIVE/POWERED
SUBWOOFER
M-12
COLUMN
SPEAKER
M-12
COLUMN
SPEAKER
M-12 SUB
ACTIVE/POWERED
SUBWOOFER
CONTROL
SOFTWARE
USB-RS485
CONVERTER
COMPUTER
USB CABLE
NETWORK CABLE
200W RM S
8 Ω
392 16 0811600
INPUT / LINK B
± 1
A ± 2 B ± 2
± 2
INPUT / LINK A
± 1
A ± 2 B ± 2
± 2
10
Speaker
FRONT & REAR PANEL OF PASSIVE/NON-POWERED SUBWOOFER M-12 NP
COLUMN SPEAKER PASSIVE SUBWOOFER
Front View
CONTROLS AND FUNCTIONS
FRONT & REAR PANEL OF COLUMN SPEAKER M-12
12-INCH WOOFER [3-INCH VOICE COIL LOW FREQUENCY WOOFER]
SUBWOOFER HANDLE
MOUNTING SLOT
SPEAKER INPUT/OUTPUT TERMINAL (Speakon)
1
2
3
4
Side View Rear ViewFront View
Top View
Top View
1
Bottom View
1
Rear View
POWER : 300W (R MS), IMPE DANCE: 8 Ω
392160811350
CALIFORNIA, UNITED STATES OF AMERIC A
E-m ail : s al es@ be tt er mus ic bui ld er. com
ww w . B e t t e r Mu s i c B u il d e r . c om
ENGIN EERED AND DES IGN I N U. S.A.
OUT PUTINPU T
SERI AL NO .
OUTPUTINPUT
2
4
3
3
MOUNTING SLOT
3-INCH TWEETERS [0.8” VOICE
COIL MID/HIGH UNIT]
LOCKING CLAMP HANDLE
SPEAKER INPUT/LINK TERMINAL
(Speakon)
CONNECTION POLE
1
2
3
4
5
INPUT / LINK
± 1
A ± 2 B ± 2
± 2
5
1
2
3
4
11
ACTIVE SUBWOOFER
FRONT & REAR PANEL OF ACTIVE/POWERED SUBWOOFER M-12 SUB
Front View
LINK VOLUME
CLIP
ON
POWER:70 0W+700W
LINE OUTPUT LINE INPUT
INPUT OUTPUT
LEFT O UTPUT
Colum n Spea ker
MIN. 4 Ω
RIGHT OUTPUT
Passi ve Sub woof er
MIN. 8 Ω
AC POW ER INPUT 110V, 50Hz
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WITHOUT AUTHORIZATION
GROUND
OFF
ON
392 16 08 26500
SERIA L NO.
MOD EL NO .: M -1 2 S UB
12” ACTIVE / POWERED SUBWOOF ER
CALIFORNIA, UNITE D STATES OF AMERICA
E- mai l: sal es @be tt er mu sic bu ild er. co m
w w w .B e t t e r M u s ic B u i l d e r. c o m
ENGI NEER ED AN D DE SIGN ED IN U.S. A.
Rear View
12-INCH WOOFER [3-INCH VOICE COIL LOW
FREQUENCY WOOFER]
SUBWOOFER HANDLE
MOUNTING SLOT
REAR PANEL
LINK OUTPUT (CAT-5)
LINK INPUT (CAT-5)
LEFT OUTPUT TO COLUMN SPEAKER
AC-POWER: 110V for USA & Canada. 220V for Asia
and Europe.
LINE INPUT (XLR)
VOLUME CONTROL
LINE OUTPUT (XLR)
RIGHT OUTPUT TO PASSIVE SUBWOOFER
POWER SWITCH
1
2
8
3
4
5
6
7
Top View
LINK VOLUME
CLIP
ON
POWER:700W+700W
LINE OUTPUT LINE INPUT
INPUT OUTPUT
LEFT OUTPUT
Column Speaker
MIN. 4 Ω
RIGHT OUTPUT
Passive Subwoofer
MIN. 8 Ω
AC POWER INPUT 110V, 50Hz
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC S HOCK
DO NOT OPEN
WITHOUT AUTH ORIZATION
GRO UND
OFF
ON
392160826500
SERI AL NO.
MOD E L NO.: M - 12 SUB
12” ACTIVE / POWERED SUBWOOFER
CALIFORNIA, UNITED STATES OF AMERICA
E- m a il : s al e s@ b e tt e r mu s ic b ui l d er.c o m
w w w . B e t t e r M u s i c B u i l d e r . c o m
EN GIN E ERE D A ND D ESI G NED IN U. S.A.
10
13
11
12
9
7
6
8
5
9
10
11
12
13
1
2
3
4
12
SYSTEM SETUP GUIDELINES
Set Up
Wall
Mounting to Solid Wood or Wood Studs
In North America, most houses have 2”x4” wood studs
inside the panel walls. You may use stud finder to locate the
wood studs. Then, drive the screw into the wood stud to
mount the speaker bracket.
PANEL WALL
2”X4” WOOD STUD
We recommend tilting speakers at an angle to aim at ear
level for the best experience.
NOTE
Dimensions: Wall Mount (SL-001)
12.5 inch
31.8 cm
9.8 inch
25 cm
3.2 inch
8 cm
11.2 inch
28.3 cm
1.4 inch / 3.5 cm5.5 inch / 14 cm
Adjusting the Wall Mount (SL-001)
Adjust the wall mount left/right at 180 degree and up/down
at 90 degree for rotation at different angles to achieve the
best sound effect. Once the right position has been set up,
use the screw to fasten it. Part Number: SL-001 (Optional) for
wall mount.
180° (ADJUSTABLE)
LEFT RIGHT
20 Feet
-6 dB
80 Degree
-6 dB
1. MOUNTING SPEAKER TO WALL
STEP : Place the wall mount panel on the wall and use
three or more screws to fasten it.
STEP : Put the speaker firmly onto the mount.
Adjust the speaker up and down for rotation at different
angles to achieve the best sound effect.
The structure of the wall must be strong enough to hold up
to 100 pounds.
1
2
NOTE
UP
DOWN
90°
(ADJUSTABLE)
Wall
13
4. SETUP SPEAKER SYSTEM
Floor
3
4
5
M-12 SUB/
M-12 NP
SUBWOOFER
M-12 COLUMN SPEAKER
M-12 COLUMN SPEAKER
Please do not stack more than
one unit of M-12 onto the speaker
stand. We recommend a higher power
speaker for more output volume.
The speaker portable stand as
indicated in the diagram is not
included with any of our speaker
models. You may order it directly from
our authorized dealers near you.
NOTE
3. PLACING SPEAKER ON PORTABLE STAND
The speaker can be mounted onto the optional portable
stand (see figure below). Make sure that the mounting system
(hardware, stand, etc.) is capable of supporting four times the
weight of the speaker.
Part Number: AMS001B (Optional).
The speaker
mounting pole as
indicated in the diagram
is not included with any
of our speaker models.
You may order it directly
from our authorized
dealers.
NOTE
2. PLACING SPEAKER ON SPEAKER MOUNTING
POLE (Adjustable)
Part Number: AM91 (Optional)
DFS-112 SUB
SPEAKER
MOUNTING
POLE
(Adjustable)
38 inch
96.5 cm
The M-12 column speaker was mounting slot both on top
and bottom for linking speakers and mounting onto the M-12 SUB or
speaker stand.
NOTE
Stand is not included
M-12
M-12
Using the provided mounting slot on the M-12 column
speaker, insert into the silver color connecting pole.
Secure with the locking clamp handle on the back of the
M-12 column speaker.
1
2
Place the M-12 SUB/
M-12 NP on even
surface.
Insert the first M-12
column speaker to the
top of the M-12 SUB
subwoofer. Be sure to
fully insert it into the
socket to assure
stability.
Insert the second
M-12 column speaker
to the top of the first
M-12 column speaker.
Be sure to fully insert
it into the socket to
assure stability.
3
4
5
M-12 COLUMN SPEAKER
SIDE VIEW
2
LOCKING CLAMP HANDLE
2
LOCKING CLAMP HANDLE
M-12 TOP &
BOTTOM VIEW
CONNECTION POLE
1
M-12
MOUNTING
SLOT
14
PRO
PROFESSIONAL/COMMERCIAL (OPTIONAL)
1. HOW TO GET THE SOFTWARE
The software CD is included in the packaging. The latest
version software may be downloaded from the Better Music
Builder website.
2. SOFTWARE INSTALLATION INFORMATION
System requirements:
• Windows 98/XP or newer version.
• Display resolution should be 1024 x 768 or above.
• The computer must have an USB port.
3. INSTALL CONTROL SOFTWARE SUITE
After verifying the computer is up to the system requirements,
run the “nSpeakerEditor” file. Then, follow the computer’s
setup guide to install the control software.
4. EQUIPMENT CONNECTION
Connect the equipment to computer using the USB-RS485
converter. The computer will indicate that a new device is
found, proceed to install the driver located in the
“Pl2303_rolific_DriverInstaller_ v1210” directory of the CD.
Then, follow the computer’s setup guide to install the
USB-RS485 driver.
PC
USB CABLE
USB Type A
CONTROL
SOFTWARE
SUITE
M-12 SUB
ACTIVE/POWERED
SUBWOOFER
NETWORK CABLE
CAT5 or RJ45
CONNECTION
USB-RS485
CONVERTER
15
5. SOFTWARE OPERATION GUIDE
1. RUN THE SOFTWARE:
Run the software “SpeakerEditor”
from program menu in the windows
start button. The following interface
will be shown. See Figure 1:
FIGURE 1
2. COMMUNICATIONS:
Click “Communication” to select the
COM value. The right bar turns
green when the COM value is
correct.
Then select the speaker you want to
debug ID address, “Device Address”
address factory setting is usually
“Addr = 01”. See Figure 2:
FIGURE 2
2
1
16
5. SOFTWARE OPERATION GUIDE (Continued)
3. CONNECT:
Click “Connect” button to connect to
speakers. After connection is
completed, the “Connect” indicator
turns green. See Figure 3:
4. UPDATE:
Click “Update” button to upload the
current speaker setup data. See
Figure 4:
FIGURE 3
FIGURE 4
17
5. SOFTWARE OPERATION GUIDE (Continued)
5. LOADING PARAMETER
SETTING:
Click “Browse” button to find the
parameter setting folder and then
click on “OK” button. See Figure 5:
FIGURE 5
6. LOADING PARAMETER
SETTING:
Select the name of the desired
parameter and then click “Load”
button. See Figure 6:
FIGURE 6
2
3
1
1
2
18
5. SOFTWARE OPERATION GUIDE (Continued)
7. SAVING THE PARAMETER
SETTINGS TO THE COMPUTER
PROGRAM.
Click “Save” button and input the
program name.
Then click “Enter” button. See Figure
7:
FIGURE 7
1
3
2
FIGURE 9
19
5. SOFTWARE OPERATION GUIDE (Continued)
8. READ SPEAKER ID ADDRESS:
Run the software “AddressEditor”
from program menu in the windows
start button.
Click “Communication” to select
COM value.
Then click “Read Address” button.
See Figure 8:
FIGURE 8
9. WRITE SPEAKER ID ADDRESS:
Click “Communication” to select
COM value.
Then select the value to write the
address ID.
And click “Program Address” button.
See Figure 9:
1
2
1
2
3
20
SUPPORTED FIXTURE
GroundGroundM-12 SUB / M-12 NP
CABINET TYPE
High Intensity PlywoodHigh Intensity PlywoodAluminum Enclosure
HIGHLIGHTED
FEATURES
Compact vented sub-bassBuilt-In power amplifierLightweight aluminum enclosure
SENSITIVITY
96 dB/1W/1MN/A97 dB/1W/1M
RATED IMPEDANCE
8 ohms 8 ohms4 ohms
FREQUENCY
RESPONSE
40Hz ~ 300Hz ( ± 3 dB)40Hz ~ 300Hz ( ± 3 dB)150Hz ~ 18kHz ( ± 3 dB)
CROSSOVER
FREQUENCY
LF: 300Hz HF: 5kHzLF: 300Hz HF: 5kHzLF: 300Hz HF: 5kHz
WOOFER [LF] 12” (1 unit) Low Frequency12” (1 unit) Low FrequencyN/A
TWEETER [MF/HF] N/AN/A3” (8 units) Middle/High Frequency
MODEL
MODEL
HANDLING
POWER
300 Watts (RMS), 1,200 Watts (PEAK)2 x 700 Watts200 Watts (RMS), 800 Watts (PEAK)
DISPERSION (HxV)
N/AN/A68°×30° (-6 dB)
MAXIMUM SPL
122dB (CONTINUOUS), 128dB (PEAK)122dB (CONTINUOUS), 128dB (PEAK)120dB (CONTINUOUS), 126dB (PEAK)
PHYSICAL DIMENSIONS
Dimensions
NET WEIGHT
SHIPPING WEIGHT
M-12 NP
23.8 x 24.9 x 16.3 in
60.5 x 63.2 x 41.5 cm
(each)
48.6 lbs / 22 kg (each)
55 Lbs / 24.9 Kg (each)
12.8 x 21.1 x 20.3 in
32.5 x 53.5 x 51.5 cm (each)
M-12 SUB
23.8 x 24.9 x 16.3 in
60.5 x 63.2 x 41.5 cm
(each)
55 lbs / 24.9 kg (each)
62 Lbs / 28.1 Kg (each)
12.8 x 21.1 x 20.3 in
32.5 x 53.5 x 51.5 cm (each)
DIMENSIONS
(W x H x D)
PACKING
DIMENSIONS
(W x H x D)
M-12
33.1 x 7.7 x 13.4 in
84 x 19.5 x 34 cm
(pair)
11.4 lbs / 5.2 kg (each)
27 Lbs / 12.2 Kg (pair)
3.9 x 29.5 x 4.3 in
10 x 75 x 11 cm (each)
SPECIFICATIONS
Spec
ACTIVE/POWERED SUBWOOFERCOLUMN SPEAKER
PASSIVE/NON-POWERED SUBWOOFER
ACTIVE/POWERED SUBWOOFERCOLUMN SPEAKER
PASSIVE/NON-POWERED SUBWOOFER
TYPE
FrontFrontFront
M-12 NPM-12 SUBM-12
INPUT
IMPEDANCE
N/A
20k ohm balanced input;
10k ohm unbalanced input
N/A
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

Better Music Builder M-12 Owner's manual

Better Music Builder
Brand
Better Music Builder
Model
M-12
Category
Audio amplifiers
Type
Owner's manual
This manual is also suitable for

Better Music Builder M-12 is a versatile audio system designed to cater to various sound reinforcement needs. Its modular design allows for flexible configurations, making it suitable for a wide range of applications, from small gatherings to larger events.

The M-12 Column Speaker, with its eight mid & high drivers, delivers crystal-clear audio with a wide frequency response. Its lightweight aluminum enclosure and compact design make it easy to transport and set up.

The M-12 SUB is the powerhouse of the system, featuring a built-in power amplifier and a 12" woofer that provides deep, impactful bass. Its digital amplifier with DSP and multiple outputs allows for easy integration with other speakers.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents