2. Computers & electronics
  3. Audio & home theatre
  4. Portable speakers
  5. Fresh 'n Rebel
  6. 1ND100WH
1ND100WH

Fresh 'n Rebel 1ND100WH, NOONDAY M User manual

  • Hello! I am an AI chatbot trained to assist you with the Fresh 'n Rebel 1ND100WH User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How do I reset my Noonday M speaker?
    How do I connect my Noonday M speaker to my phone or tablet via NFC?
    How do I connect my Noonday M speaker to my phone or tablet via Bluetooth?
    How do I connect my Noonday M speaker to my phone or tablet via audio cable?
    How do I pair two Noonday M speakers for TrueWireless Stereo™?
65
CONTENTS
1. GET TO KNOW YOUR NOONDAY M SPEAKER
1.1 BUTTONS
1.2 LEDS
2. SET UP THE SPEAKER
3. CONNECT TO YOUR SPEAKER
3.1 CONNECT VIA NFC
3.2 CONNECT VIA BLUETOOTH
3.3 CONNECT VIA THE AUDIO CABLE
4. PAIRING TWO NOONDAY M SPEAKERS
FOR TRUEWIRELESS STEREO
™
EN
1ND100 QIG Noonday M.indd 5-6 06-01-14 16:06
87
ON/OFF
PREVIOUS SONG
PLAY / PAUSE
BLUETOOTH PAIRING
NEXT SONG
VOLUME 
VOLUME +
1.
GET TO KNOW YOUR
NOONDAY M SPEAKER
1.1 BUTTONS:
Resetting your Noonday M speaker:
Press the Volume+ and Volume- buttons for 5 seconds
EN
1ND100 QIG Noonday M.indd 7-8 06-01-14 16:06
109
1.2 LEDS:
NOW THAT YOU KNOW YOUR
NOONDAY M SPEAKER A BIT BETTER,
SET IT UP AND START ENJOYING
PREMIUM AUDIO!
LED o : speaker is o or in standby mode (automatic standby
after 3 minutes, touch any key to wake up)
LED blue, blinking slow: paired with another Bluetooth device
LED blue and red, blinking fast: speaker is in paring mode
LED red, blinking fast: battery is low
LED red, blinking slow: battery is charging
EN
1ND100 QIG Noonday M.indd 9-10 06-01-14 16:07
1211
2.
SET UP YOUR SPEAKER
2.1 PLACE THE SPEAKER ON
A SOLID SURFACE
EN
1ND100 QIG Noonday M.indd 11-12 06-01-14 16:07
1413
2.3 PRESS THE ON/OFF BUTTON
FOR THREE SECONDS UNTIL
YOU HEAR A STARTUP SOUND
2.2 PLUG THE CABLE INTO
A POWER SOCKET
3 SEC.
EN
1ND100 QIG Noonday M.indd 13-14 06-01-14 16:07
1615
3.
CONNECT TO
YOUR SPEAKER
3.1 CONNECT VIA NFC
1. If your phone or tablet supports NFC, turn the feature on
2. Press and hold the Bluetooth Pairing button for 3 seconds until you hear a short sound
3. Tap your phone against the speaker to connect
4. After a few seconds you will hear a short beep to confi rm the connection
5. You’re now ready to play your favourite tunes
EN
1ND100 QIG Noonday M.indd 15-16 06-01-14 16:08
1817
3.2 CONNECT VIA BLUETOOTH 3.3 CONNECT VIA AUDIO CABLE
1. Take the supplied audio cable
2. Connect one end to your Noonday M Speaker
3. Connect the other end to any device with a headphone jack or audio output
4. You’re now ready to play your favourite tunes
EN
1. Activate Bluetooth on your phone or tablet and scan for Bluetooth devices
2. Press and hold the Bluetooth Pairing button for 3 seconds until you hear a short sound
3. Select the Noonday M speaker and connect
4. A short sound will confi rm that the connection is successful,
the LED will blink blue
5. You’re now ready to play your favourite tunes
1ND100 QIG Noonday M.indd 17-18 06-01-14 16:08
2019
1. Press the Vol+ and Vol- buttons on both Noonday M speakers for
5 seconds to reset them
2. Pick one speaker to be the master speaker. Press the Bluetooth
button and the >>
|
button for 3 seconds.
3. A sound signal will notify you that the master speaker is ready to be paired with
the second speaker. The LED will blink red and blue.
4. On the second speaker press the Bluetooth button and
the >>
|
button for 3 seconds.
5. When the sound signal stops and the LEDs blink blue your two
Noonday M speakers are paired
6. You can now connect your phone or tablet to the master speaker
and play your favourite tunes on both speakers
4.
PAIRING TWO NOONDAY M
SPEAKERS FOR
TRUEWIRELESS STEREO
™
SPEAKER 1
LEFT
SPEAKER 2
RIGHT
EN
1ND100 QIG Noonday M.indd 19-20 06-01-14 16:09
2827
2.
DE NOONDAY M INSTELLEN
2.1 PLAATS DE LUIDSPREKER OP
EEN STEVIGE ONDERGROND
NL
1ND100 QIG Noonday M.indd 27-28 06-01-14 16:09
3029
2.3 HOUD DE AAN/UITKNOP
3 SECONDEN INGEDRUKT,
TOTDAT JE EEN OPSTART
GELUID HOORT
2.2 SLUIT DE KABEL AAN OP
EEN STOPCONTACT
3 SEC.
NL
1ND100 QIG Noonday M.indd 29-30 06-01-14 16:09
5453
INDICE
1. PANORAMICA DELL’ALTOPARLANTE NOONDAY M
1.1 PULSANTI
1.2 LED
2. CONFIGURAZIONE DELL’ALTOPARLANTE
3. CONNESSIONE DELL’ALTOPARLANTE
3.1 CONNESSIONE TRAMITE NFC
3.2 CONNESSIONE TRAMITE BLUETOOTH
3.3 CONNESSIONE TRAMITE CAVO AUDIO
4. ABBINAMENTO DI DUE ALTOPARLANTI NOONDAY M
PER UNA QUALITÀ TRUEWIRELESS STEREO
™
IT
1ND100 QIG Noonday M.indd 53-54 06-01-14 16:14
5655
ON/OFF
BRANO PRECEDENTE
PLAY/PAUSA
ABBINAMENTO BLUETOOTH
BRANO SUCCESSIVO
VOLUME 
VOLUME +
1.
PANORAMICA DELL’ALTO
PARLANTE NOONDAY M
1.1 PULSANTI:
Per resettare l’altoparlante Noonday M:
tenere premuti i tasti Volume+ e Volume- per 5 secondi
IT
1ND100 QIG Noonday M.indd 55-56 06-01-14 16:14
6059
2.
CONFIGURAZIONE
DELL’ALTOPARLANTE
2.1 APPOGGIARE L’ALTOPARLANTE
SU UNA SUPERFICIE SOLIDA
IT
1ND100 QIG Noonday M.indd 59-60 06-01-14 16:14
6261
2.3 TENERE PREMUTO IL
PULSANTE ON/OFF PER TRE
SECONDI, FINO A SENTIRE UN
SEGNALE ACUSTICO
2.2 COLLEGARE IL CAVO A
UNA PRESA DI CORRENTE
DISPONIBILE
3 SEC.
IT
1ND100 QIG Noonday M.indd 61-62 06-01-14 16:14
7069
ES
ÍNDICE
1. CONOCE TU ALTAVOZ NOONDAY M
1.1 BOTONES
1.2 LED
2. CONFIGURA TU ALTAVOZ
3. CONECTA TU ALTAVOZ
3.1 CONEXIÓN A TRAVÉS DE NFC
3.2 CONEXIÓN A TRAVÉS BLUETOOTH
3.3 CONEXIÓN MEDIANTE EL CABLE DE AUDIO
4. ASOCIE DOS ALTAVOCES NOONDAY M
PARA TRUEWIRELESS STEREO
™
1ND100 QIG Noonday M.indd 69-70 06-01-14 16:16
7675
2.
CONFIGURA TU ALTAVOZ
2.1 COLOCA EL ALTAVOZ SOBRE
UNA SUPERFICIE SÓLIDA
ES
1ND100 QIG Noonday M.indd 75-76 06-01-14 16:17
7877
78
3 SEG.
2.3 PULSE EL BOTÓN DE
ENCENDIDO/APAGADO DURANTE
TRES SEGUNDOS HASTA QUE OIGA
UN SONIDO DE INICIO
2.2 ENCHUFA EL CABLE A UNA
TOMA DE CORRIENTE
DISPONIBLE
ES
1ND100 QIG Noonday M.indd 77-78 06-01-14 16:17
9291
2.
INSTALLATION
DU HAUTPARLEUR
2.1 PLACEZ LE HAUTPARLEUR
SUR UNE SURFACE STABLE.
FR
1ND100 QIG Noonday M.indd 91-92 06-01-14 16:19
9493
94
3 SEC.
2.3 APPUYEZ SUR LE BOUTON
MARCHE/ARRÊT PENDANT
TROIS SECONDES JUSQU’À CE
QUE LE SON DE DÉMARRAGE
RETENTISSE.
2.2 BRANCHEZ LE CÂBLE DANS UNE
PRISE ÉLECTRIQUE DISPONIBLE
FR
1ND100 QIG Noonday M.indd 93-94 06-01-14 16:20
102101
PT
ÍNDICE
1. CONHEÇA A SUA COLUNA NOONDAY M
1.1 BOTÕES
1.2 LEDS
2. CONFIGURE A COLUNA
3. LIGUE UM EQUIPAMENTO À COLUNA
3.1 LIGAR POR NFC
3.2 LIGAR POR BLUETOOTH
3.3 LIGAR POR CABLE DE ÁUDIO
4. EMPARELHAR DUAS COLUNAS NOONDAY M
PARA TRUEWIRELESS STEREO
™
1ND100 QIG Noonday M.indd 101-102 06-01-14 16:22
/