4CH Quick Start Guide
1. Packing........................................p2
2. Hard Disk Installation.................p3
3. Front Panel Controls...................p5
4. Rear
Panel Connectors...............p6
5. Live Operations...........................p7
6. Playback Operations................p10
Default Username is Admin
Default password is 123456
4CH Quick Start Guide V0.5(M02)
4CH Quick Start Guide
1. Packing........................................p2
2. Hard Disk Installation.................p3
3. Front Panel Controls...................p5
Panel Connectors...............p6
5. Live Operations...........................p7
6. Playback Operations................p10
Default Username is Admin
Default password is 123456
4CH Quick Start Guide V0.5(M02)
-
p
1
4CH Quick Start Guide
1. Packing........................................p2
2. Hard Disk Installation.................p3
3. Front Panel Controls...................p5
Panel Connectors...............p6
5. Live Operations...........................p7
6. Playback Operations................p10
Default Username is Admin
Default password is 123456
Note: Standard shipping products do not include HDD
2. Quick Start Guide
8. Power Adapter
5. CD
4CH Quick Start Guide V0.3(M02)
Note: Standard shipping products do not include HDD
1. DVR
3. IR Remote Control
7.
Screw 4 pcs
4. Battery 2 pcs
6. SATA Cord 1 pcs
4CH Quick Start Guide V0.3(M02)
-
p
2
Screw 4 pcs
4. Battery 2 pcs
Step 1: Take off the three screws from the bottom of
indicated in red circles in the picture below.
p.s. Standard shipping products do not include HDD.
Step 2: Open the cover follow the way the arrows indicate.
Step 3: Fix the HDD to rack mount and connect SATA and the
cable as indicated.
4CH Quick Start Guide V0.5(M02)
Step 1: Take off the three screws from the bottom of
the DVR as
indicated in red circles in the picture below.
p.s. Standard shipping products do not include HDD.
Step 2: Open the cover follow the way the arrows indicate.
Step 3: Fix the HDD to rack mount and connect SATA and the
cable as indicated.
4CH Quick Start Guide V0.5(M02)
- p3
the DVR as
p.s. Standard shipping products do not include HDD.
Step 3: Fix the HDD to rack mount and connect SATA and the
power
Step 4: Put DVR bottom up, screw to fix the HDD as indicated.
Step 5: Put the cover back and put the three screws back to fix the
cover in the bottom of the DVR.
NOTE: The initialization of
recording,
please refer to manual “4
4CH Quick Start Guide V0.5(M02)
Step 4: Put DVR bottom up, screw to fix the HDD as indicated.
Step 5: Put the cover back and put the three screws back to fix the
cover in the bottom of the DVR.
NOTE: The initialization of
new-
installed HDD is required before
please refer to manual “4
-
8UTILITY SETUP” for detail.
4CH Quick Start Guide V0.5(M02)
- p4
Step 4: Put DVR bottom up, screw to fix the HDD as indicated.
Step 5: Put the cover back and put the three screws back to fix the
installed HDD is required before
8UTILITY SETUP” for detail.
1- USB Port
Top(USB2.0)
B
ottom
2-
LED Display-
Power
DVR power on
3-
LED Display-
HDD
HDD data reading
4-
LED Display-
LAN
Network connected
5-
LED Display-
LOGIN
Remote user login
6-
LED Display-
REC
DVR Recording
on)
7-
LED Display-
PLAY
DVR Playback
8- IR Sensor
Input sensor for the remote control
4CH Quick Start Guide V0.5(M02)
Top(USB2.0)
is used to plug the USB memory stick
ottom
(USB1.1) is used to plug the mouse
DVR power on
HDD data reading
Network connected
Remote user login
DVR Recording
(
or Schedule Recording and recording
on)
DVR Playback
Input sensor for the remote control
1
3
2
4
5 6
7
8
4CH Quick Start Guide V0.5(M02)
- p5
or Schedule Recording and recording
are
1 3 4
2 5
1-
DC 12V
Socket for a
2-
MAIN monitor
BNC port for the main monitor.
3-
VIDEO IN
BNC input ports for cameras
4-
AUDIO IN
RCA input port for audio signal
5-
AUDIO OUT
RCA output for audio signal.
7-
NTSC
／
PAL Switch
Switch between NTSC and PAL format.
8-
LAN
Network
9-
VGA
VGA port.
10- EXTERNAL I/O
EXTERNAL I/O port
4CH Quick Start Guide V0.5(M02)
9
6 8 10
Socket for a
DC 12V input.
BNC port for the main monitor.
BNC input ports for cameras
, 16 in total.
RCA input port for audio signal
.
RCA output for audio signal.
Switch between NTSC and PAL format.
Network
port.
VGA port.
EXTERNAL I/O port
(see below for pin definition)
4CH Quick Start Guide V0.5(M02)
- p6
Under LIVE mode, you can watch all channel displays, receive live audio, and operate
display changes.
Table 5-
1 Description of the remote control
Button
REC
Start/Stop recording.
PLAY
Start playing back the most recently recorded segment.
LOCK
Enable/Disable the Keypad function on the front panel, the remote
control and the mouse.
1,2,3,4 Select the
channel to monitor in full screen from channel 1 to 4.
FREEZE
Turn on/off screen freeze function.
Switch to quad display.
ENTER／
／／
／MODE
Switch to full screen, quad display.
MENU／
／／
／
Enable/ Disable setup Menu.
BK-UP／
／／
／ESC
Enable/ Disable backup
SRH
Enable/ Disable search menu.
MUTE
Switch channel 1 output audio / turn off LIVE audio
STATUS
Enable/ Disable Status.
OSD
Turn on/off the screen display
ZOOM/ZOOM－
－－
－
Enable/ Disable double screen size display. You can click on the
channel name
PIP/ ZOOM＋
＋＋
＋
Turn on picture
switch to other channels.
PTZ
Enable PTZ control.
AUTO
In AUTO mode, all available channels will be cycled through in full
screen.
4CH Quick Start Guide V0.5(M02)
Under LIVE mode, you can watch all channel displays, receive live audio, and operate
1 Description of the remote control
functions under LIVE mode.
Description
Start/Stop recording.
Start playing back the most recently recorded segment.
Enable/Disable the Keypad function on the front panel, the remote
control and the mouse.
channel to monitor in full screen from channel 1 to 4.
Turn on/off screen freeze function.
Switch to quad display.
Switch to full screen, quad display.
Enable/ Disable setup Menu.
Enable/ Disable backup
menu.
Enable/ Disable search menu.
Switch channel 1 output audio / turn off LIVE audio
Enable/ Disable Status.
Turn on/off the screen display
Enable/ Disable double screen size display. You can click on the
channel name
for choosing a specific channel.
Turn on picture
-in-
picture format. Click on the channel name can
switch to other channels.
Enable PTZ control.
In AUTO mode, all available channels will be cycled through in full
4CH Quick Start Guide V0.5(M02)
- p7
Under LIVE mode, you can watch all channel displays, receive live audio, and operate
Enable/Disable the Keypad function on the front panel, the remote
channel to monitor in full screen from channel 1 to 4.
Enable/ Disable double screen size display. You can click on the
picture format. Click on the channel name can
In AUTO mode, all available channels will be cycled through in full
Table 5-2
Graphical icons displaying after right
Icon
Resting the cursor on this icon will bring up the following four menu icons.
Main menu.
Search menu.
Backup menu.
PTZ mode.
Turn on/off recording.
Playback.
Resting the cursor on this icon will bring up the following five display icons.
FREEZE.
PIP, picture in picture
ZOOM,
double the screen size
AUTO-sequence
LOCK, activate the key lock.
Full screen display.
Quad display.
4CH Quick Start Guide V0.5(M02)
Graphical icons displaying after right
-
clicking your mouse under LIVE mode.
Description
Resting the cursor on this icon will bring up the following four menu icons.
Resting the cursor on this icon will bring up the following five display icons.
double the screen size
LOCK, activate the key lock.
4CH Quick Start Guide V0.5(M02)
- p8
clicking your mouse under LIVE mode.
Resting the cursor on this icon will bring up the following four menu icons.
Resting the cursor on this icon will bring up the following five display icons.
Icon
Recording is on
Schedule Recording is on
Live Audio is on
Live Audio is off
Motion detected on the channel
Sensor triggered on the channel
Video loss detected on the channel
USB device
Connected to the LAN cable.
AUTO-
seq is on
Freeze is on, screen is frozen
LOCK is on
PTZ control is on
Shows the current hard disk space has been used
(99% mean used 99%, remain 1%)and Overwrite in on
Lower right of each CH will show the current time
Icon
/
Image quality (High/Low)
/
Full screen
Record
Snap shot(
Record and snap shot file saving path setup
Enable/Disable s
4CH Quick Start Guide V0.5(M02)
Description
Recording is on
Schedule Recording is on
Live Audio is on
Live Audio is off
Motion detected on the channel
Sensor triggered on the channel
Video loss detected on the channel
USB device
detected
Connected to the LAN cable.
seq is on
Freeze is on, screen is frozen
LOCK is on
PTZ control is on
Shows the current hard disk space has been used
(99% mean used 99%, remain 1%)and Overwrite in on
Lower right of each CH will show the current time
Description
Image quality (High/Low)
Full screen
Record
Snap shot(
Photo time in accordance with PC-time)
Record and snap shot file saving path setup
Enable/Disable s
hortcut toolbar
4CH Quick Start Guide V0.5(M02)
- p9
Under LIVE mode, press PLAY to playback (default setup is quad display.) When the icon
is shown on the screen, the function icons will appear in the right down corner on the screen.
The icon can be dragged by mouse to
Table 6-
1 Remote control functions under the PLAYBACK mode
Icon
ENTER/ MODE
Switch to full screen, quad display.
MENU /
Turn on/off PAUSE.
PLAY
Play back at normal speed.
/ SLOW
Play back at
1/16 by each pressing of the button till the slowest limitation of 1/16 of
the normal speed. Current playback speed is shown in the upper right
corner.
/
Fast rewind. Each press
six speeds: 2x, 4X, 8X, 16x, 32X and 64X.
/
Fast forward. Each press increases the speed to the next level. There
are six speeds: 2x, 4X, 8X, 16x, 32X and 64X.
/
Stop
playback.
Table 6-
2 The mouse operation under the PLAYBACK mode.
Icon
「
「
／
Play/pause
「
「
Playback channel by
Full screen display
Quad display
Zoom
P.S. If playback of a single channel is wished to be viewed, please double click on left
key of the mouse on the channel video image.
4CH Quick Start Guide V0.5(M02)
Under LIVE mode, press PLAY to playback (default setup is quad display.) When the icon
is shown on the screen, the function icons will appear in the right down corner on the screen.
The icon can be dragged by mouse to
other location on the screen.
1 Remote control functions under the PLAYBACK mode
Description
Switch to full screen, quad display.
Turn on/off PAUSE.
Play back at normal speed.
Play back at
slower speed. The speed will be slowed to 1/2, 1/4, 1/8,
1/16 by each pressing of the button till the slowest limitation of 1/16 of
the normal speed. Current playback speed is shown in the upper right
Fast rewind. Each press
increases the speed to the next level. There are
six speeds: 2x, 4X, 8X, 16x, 32X and 64X.
Fast forward. Each press increases the speed to the next level. There
are six speeds: 2x, 4X, 8X, 16x, 32X and 64X.
playback.
2 The mouse operation under the PLAYBACK mode.
Description
「
/ 」 Fast rewind
「
/ 」Fast forward
Play/pause
「
▲ / SLOW
」，slow playback
「
▼
/ ■」stop playback
Playback channel by
channel with snap shot display
Full screen display
Quad display
Zoom
-in display
P.S. If playback of a single channel is wished to be viewed, please double click on left
key of the mouse on the channel video image.
4CH Quick Start Guide V0.5(M02)
- p10
Under LIVE mode, press PLAY to playback (default setup is quad display.) When the icon
is shown on the screen, the function icons will appear in the right down corner on the screen.
slower speed. The speed will be slowed to 1/2, 1/4, 1/8,
1/16 by each pressing of the button till the slowest limitation of 1/16 of
the normal speed. Current playback speed is shown in the upper right
increases the speed to the next level. There are
Fast forward. Each press increases the speed to the next level. There
P.S. If playback of a single channel is wished to be viewed, please double click on left
/
