Sharp PN-L601B Operating instructions

Brand: Sharp

Model: PN-L601B

Type: Operating instructions

This manual is also suitable for

PNL601B

PN-L601B

LCD MONITOR

OPERATION MANUAL

IMPORTANT:

To aid reporting in case of loss or theft, please record the

product’s model and serial numbers in the space provided.

The numbers are located in the rear of the product.

Model No.:

Serial No.:

U.S.A. ONLY

FOR CUSTOMERS IN U.K.

IMPORTANT

The wires in this mains lead are coloured in accordance with the following code:

GREEN-AND-YELLOW: Earth

BLUE: Neutral

BROWN: Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the

terminals in your plug proceed as follows:

•ThewirewhichiscolouredGREEN-AND-YELLOWmustbeconnectedtotheterminalintheplugwhichismarkedbythe

letter E or by the safety earth

orcolouredgreenorgreen-and-yellow.

•ThewirewhichiscolouredBLUEmustbeconnectedtotheterminalwhichismarkedwiththeletterN or coloured black.

•ThewirewhichiscolouredBROWNmustbeconnectedtotheterminalwhichismarkedwiththeletterL or coloured red.

Ensurethatyourequipmentisconnectedcorrectly.Ifyouareinanydoubtconsultaqualiedelectrician.

“WARNING: THIS APPARATUS MUST BE EARTHED.”

AuthorisedrepresentativeresponsiblefortheEuropeanUnionCommunityMarket

SHARPELECTRONICS(Europe)GmbH

Sonninstraße3,D-20097Hamburg

IMPORTANT INFORMATION

WARNING: TOREDUCETHERISKOFFIREORELECTRICSHOCK,DONOTEXPOSETHISPRODUCT

TORAINORMOISTURE.

RISKOFELECTRIC

SHOCK

DONOTOPEN

CAUTION

CAUTION: TOREDUCETHERISKOFELECTRIC

SHOCK,DONOTREMOVECOVER.

NOUSER-SERVICEABLEPARTS

INSIDE.

REFERSERVICINGTOQUALIFIED

SERVICEPERSONNEL.

Thelightningashwitharrowheadsymbol,within

anequilateraltriangle,isintendedtoalertthe

user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may

beofsufcientmagnitudetoconstituteariskof

electric shock to persons.

The exclamation point within a triangle is

intended to alert the user to the presence of

importantoperatingandmaintenance(servicing)

instructions in the literature accompanying the

product.

WARNING:

FCCRegulationsstatethatanyunauthorizedchangesormodicationstothisequipmentnotexpresslyapprovedbythe

manufacturercouldvoidtheuser’sauthoritytooperatethisequipment.

NOTE:

ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforClassAdigitaldevice,pursuanttoPart15ofthe

FCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferencewhentheequipment

isoperatedinacommercialenvironment.Thisequipmentgenerates,uses,andcanradiateradiofrequencyenergyand,if

not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operationofthisequipmentinaresidentialareaislikelytocauseharmfulinterferenceinwhichcasetheuserwillberequired

to correct the interference at his own expense.

ThisproductcontainsaCRCoinLithiumBatterywhichcontainsPerchlorateMaterial–specialhandlingmay

apply,Californiaresidents,Seewww.dtsc.ca.gov/hazardouswaste/perchlorate/

U.S.A. ONLY

IMPORTANT INFORMATION (Continued)

A. Information on Disposal for Users (private households)

1. In the European Union

Attention:Ifyouwanttodisposeofthisequipment,pleasedonotusetheordinarydustbin!

Usedelectricalandelectronicequipmentmustbetreatedseparatelyandinaccordancewithlegislationthatrequiresproper

treatment,recoveryandrecyclingofusedelectricalandelectronicequipment.

Followingtheimplementationbymemberstates,privatehouseholdswithintheEUstatesmayreturntheirusedelectricaland

electronicequipmenttodesignatedcollectionfacilitiesfreeofcharge*.Insomecountries*yourlocalretailermayalsotake

back your old product free of charge if you purchase a similar new one.

*)Pleasecontactyourlocalauthorityforfurtherdetails.

Ifyourusedelectricalorelectronicequipmenthasbatteriesoraccumulators,pleasedisposeoftheseseparatelybeforehand

accordingtolocalrequirements.

Bydisposingofthisproductcorrectlyyouwillhelpensurethatthewasteundergoesthenecessarytreatment,recoveryand

recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due

to inappropriate waste handling.

2. In other Countries outside the EU

If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.

ForSwitzerland:Usedelectricalorelectronicequipmentcanbereturnedfreeofchargetothedealer,evenifyoudon’t

purchaseanewproduct.Furthercollectionfacilitiesarelistedonthehomepageofwww.swico.chorwww.sens.ch.

B. Information on Disposal for Business Users

1. In the European Union

If the product is used for business purposes and you want to discard it:

PleasecontactyourSHARPdealerwhowillinformyouaboutthetake-backoftheproduct.Youmightbechargedforthe

costsarisingfromtake-backandrecycling.Smallproducts(andsmallamounts)mightbetakenbackbyyourlocalcollection

facilities.

ForSpain:Pleasecontacttheestablishedcollectionsystemoryourlocalauthorityfortake-backofyourusedproducts.

2. In other Countries outside the EU

If you wish to discard of this product, please contact your local authorities and ask for the correct method of disposal.

Attention: Your product is marked with this symbol. It means that used electrical and electronic products

should not be mixed with general household waste. There is a separate collection system for these products.

The battery supplied with this product contains traces of Lead.

ForEU:

Thecrossed-outwheeledbinimpliesthatusedbatteriesshouldnotbeputtothegeneralhousehold

waste!Thereisaseparatecollectionsystemforusedbatteries,toallowpropertreatmentandrecyclingin

accordance with legislation. Please contact your local authority for details on the collection and recycling

schemes.

ForSwitzerland:

The used battery is to be returned to the selling point.

Forothernon-EUcountries:

Please contact your local authority for correct method of disposal of the used battery.

“BATTERYDISPOSAL”

THISPRODUCTCONTAINSALITHIUMPRIMARY(MANGANESSDIOXIDE)MEMORYBACK-UPBATTERYTHAT

MUSTBEDISPOSEDOFPROPERLY.PLEASECONTACTYOURLOCALSHARPDEALERORAUTHORIZEDSERVICE

REPRESENTATIVEFORASSISTANCEINDISPOSINGOFTHISBATTERY.

U.S.A.ANDCANADAONLY

EUONLY

ThankyouforyourpurchaseofaSHARPLCDproduct.Toensuresafetyandmanyyearsoftrouble-freeoperationofyour

product, please read the Safety Precautions carefully before using this product.

SAFETY PRECAUTIONS

Electricityisusedtoperformmanyusefulfunctions,butitcanalsocausepersonalinjuriesandpropertydamageifimproperly

handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can

resultinelectricshockand/orre.Inordertopreventpotentialdanger,pleaseobservethefollowinginstructionswheninstalling,

operatingandcleaningtheproduct.ToensureyoursafetyandprolongtheservicelifeofyourLCDproduct,pleasereadthe

following precautions carefully before using the product.

1. Read instructions — All operating instructions must be read and understood before the product is operated.

 2. Keepthismanualinasafeplace—Thesesafetyandoperatinginstructionsmustbekeptinasafeplaceforfuture

reference.

3. Observe warnings — All warnings on the product and in the instructions must be observed closely.

 4. Followinstructions—Alloperatinginstructionsmustbefollowed.

 5. Cleaning—UnplugthepowercordfromtheACoutletbeforecleaningtheproduct.Useadryclothtocleantheproduct.Do

notuseliquidcleanersoraerosolcleaners.

 6. Attachments—Donotuseattachmentsnotrecommendedbythemanufacturer.Useofinadequateattachmentscanresult

in accidents.

 7. Waterandmoisture—Donotusetheproductnearwater.Donotinstalltheproductinaplacewherewatermaysplashonto

it.Becarefulofequipmentwhichdrainswatersuchasanair-conditioner.

 8. Ventilation—Theventsandotheropeningsinthecabinetaredesignedforventilation.

  Donotcoverorblocktheseventsandopeningssinceinsufcientventilationcancauseoverheatingand/orshortenthelife

oftheproduct.Donotplacetheproductonasofa,rugorothersimilarsurface,sincetheycanblockventilationopenings.

Donotplacetheproductinanenclosedplacesuchasabookcaseorrack,unlessproperventilationisprovidedorthe

manufacturer’s instructions are followed.

 9. Powercordprotection—Thepowercordsmustberoutedproperlytopreventpeoplefromsteppingonthemorobjectsfrom

resting on them.

10. Thescreenusedinthisproductismadeofglass.Therefore,itcanbreakwhentheproductisdroppedorappliedwith

impact.Becarefulnottobeinjuredbybrokenglasspiecesincasethescreenbreaks.

11. Overloading—DonotoverloadACoutletsorextensioncords.Overloadingcancausereorelectricshock.

12. Enteringofobjectsandliquids—Neverinsertanobjectintotheproductthroughventsoropenings.Highvoltageowsin

theproduct,andinsertinganobjectcancauseelectricshockand/orshortinternalparts.

  Forthesamereason,donotspillwaterorliquidontheproduct.

13. Servicing—Donotattempttoservicetheproductyourself.Removingcoverscanexposeyoutohighvoltageandother

dangerousconditions.Requestaqualiedservicepersontoperformservicing.

14. Repair—Ifanyofthefollowingconditionsoccurs,unplugthepowercordfromtheACoutlet,andrequestaqualiedservice

person to perform repairs.

a. Whenthepowercordorplugisdamaged.

b. Whenaliquidwasspilledontheproductorwhenobjectshavefallenintotheproduct.

c. Whentheproducthasbeenexposedtorainorwater.

d. Whentheproductdoesnotoperateproperlyasdescribedintheoperatinginstructions.

 Donottouchthecontrolsotherthanthosedescribedintheoperatinginstructions.Improperadjustmentofcontrols

notdescribedintheinstructionscancausedamage,whichoftenrequiresextensiveadjustmentworkbyaqualied

technician.

  e. Whentheproducthasbeendroppedordamaged.

  f. Whentheproductdisplaysanabnormalcondition.Anynoticeableabnormalityintheproductindicatesthattheproduct

needs servicing.

15. Replacementparts—Incasetheproductneedsreplacementparts,makesurethattheservicepersonusesreplacement

partsspeciedbythemanufacturer,orthosewiththesamecharacteristicsandperformanceastheoriginalparts.Useof

unauthorizedpartscanresultinre,electricshockand/orotherdanger.

16. Safetychecks—Uponcompletionofserviceorrepairwork,requesttheservicetechniciantoperformsafetychecksto

ensure that the product is in proper operating condition.

17. Wallmounting—Whenmountingtheproductonawall,besuretoinstalltheproductaccordingtothemethod

recommended by the manufacturer.

18. Heatsources—Keeptheproductawayfromheatsourcessuchasradiators,heaters,stovesandotherheat-generating

products(includingampliers).

DEAR SHARP CUSTOMER

SAFETY PRECAUTIONS (Continued)

19. Batteries—Incorrectuseofbatteriesmaycausethebatteriestoburstorignite.Aleakybatterymaycorrodetheequipment,

dirty your hands or spoil your clothing. In order to avoid these problems, make sure to observe the precautions below:

  •Usethespeciedbatteriesonly.

  •Installthebatterieswithdueattentiontotheplus(+)andminus(-)sidesofthebatteriesaccordingtotheinstructionsinthe

compartment.

  •Donotmixoldandnewbatteries.

  •Donotmixbatteriesofdifferenttypes.Voltagespecicationsofbatteriesofthesameshapemayvary.

  •Replaceanexhaustedbatterywithanewonepromptly.

  •Ifyouwillnotusetheremotecontrolforalongtime,removethebatteries.

  •Ifleakedbatteryuidgetsonyourskinorclothing,rinseimmediatelyandthoroughly.Ifitgetsintoyoureye,batheyour

eyewellratherthanrubbingandseekmedicaltreatmentimmediately.Leakedbatteryuidthatgetsintoyoureyeoryour

clothing may cause a skin irritation or damage your eye.

20. Usageofthemonitormustnotbeaccompaniedbyfatalrisksordangersthat,couldleaddirectlytodeath,personalinjury,

severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and

missile launch control in a weapon system.

21. Donotstayincontactwiththepartsoftheproductthatbecomehotforlongperiodsoftime.Doingsomayresultin

low-temperatureburns.

WARNING:

This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be

requiredtotakeadequatecountermeasures.

TomaintaincompliancewithEMCregulations,useshieldedcablestoconnecttothefollowingterminals:PC/AVDVI-Doutput

terminal,PC/AVDVI-Dinputterminal,PC/AVHDMIinputterminal,PCD-SUBinputterminal,PCRGBinputterminals,and

RS-232Cinput/outputterminals.

Ifamonitorisnotpositionedinasufcientlystablelocation,itcanbepotentiallyhazardousduetofalling.Manyinjuries,

particularly to children, can be avoided by taking simple precautions such as:

•Usingxingdeviceslikewallmountbracketsrecommendedbythemanufacturer.

•Onlyusingfurniturethatcansafelysupportthemonitor.

•Ensuringthemonitorisnotoverhangingtheedgeofthesupportingfurniture.

•Notplacingthemonitorontallfurniture(forexample,cupboardsorbookcases)withoutanchoringboththefurnitureandthe

monitor to a suitable support.

•Notstandingthemonitorsonclothorothermaterialsplacedbetweenthemonitorandsupportingfurniture.

•Educatingchildrenaboutthedangersofclimbingonfurnituretoreachthemonitororitscontrols.

Especially for child safety

-Don’tallowchildrentoclimbonorplaywiththemonitor.

-Don’tplacethemonitoronfurniturethatcaneasilybeusedassteps,suchasachestofdrawers.

-Rememberthatchildrencanbecomeexcitedwhilewatchingaprogram,especiallyona“largerthanlife”monitor.Care

should be taken to place or install the monitor where it cannot be pushed, pulled over, or knocked down.

-Careshouldbetakentorouteallcordsandcablesconnectedtothemonitorsothattheycannotbepulledorgrabbedby

curious children.

-TheTFTcolorLCDpanelusedinthismonitorismadewith

the application of high precision technology. However, there

may be minute points on the screen where pixels never light

or are permanently lit. Also, if the screen is viewed from

an acute angle there may be uneven colors or brightness.

Please note that these are not malfunctions but common

phenomenaofLCDsandwillnotaffecttheperformanceof

the monitor.

-Donotdisplayastillpictureforalongperiod,asthiscould

cause a residual image.

-Neverrubortapthemonitorwithhardobjects.

-PleaseunderstandthatSHARPCORPORATIONbearsno

responsibility for errors made during use by the customer or

a third party, nor for any other malfunctions or damage to this

product arising during use, except where indemnity liability is

recognizedunderlaw.

-Thismonitoranditsaccessoriesmaybeupgradedwithout

advance notice.

-Donotusethemonitorwherethereisalotofdust,where

humidity is high, or where the monitor may come into contact

withoilorsteam,asthiscouldleadtore.

-Ensurethatthemonitordoesnotcomeintocontactwith

waterorotheruids.Ensurethatnoobjectssuchaspaper

clipsorpinsenterthemonitorasthiscouldleadtoreor

electric shock.

-Donotplacethemonitorontopofunstableobjectsorin

unsafeplaces.Donotallowthemonitortoreceivestrong

shocksortostronglyvibrate.Causingthemonitortofallor

topple over may damage it.

-Donotusethemonitornearheatingequipmentorinplaces

where there is likelihood of high temperature, as this may

leadtogenerationofexcessiveheatandoutbreakofre.

-Donotusethemonitorinplaceswhereitmaybeexposedto

direct sunlight.

-Imagescannotberotatedonthismonitor.

Whenusinginverticalorientation,youwillneedtoprepare

appropriately orientated content in advance.

-TheACoutletshallbeinstalledneartheequipmentandshall

be easily accessible.

-DonottouchthescreenwhilethePCisstartingup,since

it will be detected as a failure of the infrared transmitter/

receiverelementsandwillleadtoamalfunction.Whenthis

occurs,restartthePC.

-Donotoperatethescreenwithahardorpointedobjectsuch

asangernail,pen,orpencil.

-Twotouchpanelscannotbeusedwhentwodisplaysare

connected to the computer.

Only the touch panel on the display that is set as the primary

monitor will be operable.

-IfanotherUSBdeviceisconnectedtothecomputertowhich

thetouchpanelisconnected,donotoperatetheUSBdevice

during touch panel input. Input may not take place correctly.

-Iftheinfraredtransmitter/receiverbecomesdirty,

malfunctioning may result. Use a soft cloth to gently wipe dirt

off the infrared transmitter/receiver.

-Ifdustaccumulatesinsidetheinfraredtransmitter/receiver,

the product cannot transmit or receive infrared rays properly,

resulting in a malfunction. To clean the dust accumulated

inside,contactanauthorizedSharpservicingdealeror

servicecenter(extrachargerequired).

The Power Cord

-Useonlythepowercordsuppliedwiththemonitor.

-Donotdamagethepowercordnorplaceheavyobjectson

it, stretch it or over bend it. Also, do not add extension cords.

Damagetothecordmayresultinreorelectricshock.

-Donotusethepowercordwithapowertap.

Addinganextensioncordmayleadtoreasaresultof

overheating.

-Donotremoveorinsertthepowerplugwithwethands.

Doingsocouldresultinelectricshock.

-Unplugthepowercordifitisnotusedforalongtime.

-Donotattempttorepairthepowercordifitisbroken

or malfunctioning. Refer the servicing to the service

representative.

Manual Scope

-Microsoft,Windows,WindowsVistaandInternetExplorer

areregisteredtrademarksofMicrosoftCorporation.

-HDMI,theHDMILogoandHigh-DenitionMultimedia

InterfacearetrademarksorregisteredtrademarksofHDMI

LicensingLLC.

-Adobe,Acrobat,andReaderareeitherregisteredtrademarks

or trademarks of Adobe Systems Incorporated in the United

States and/or other countries.

-Intel,Celeron,andIntelCore2Duoaretrademarksor

registeredtrademarksofIntelCorporationoritssubsidiaries

in the U.S.A. and other countries.

-AMD,AMDSempron,AMDAthlon,andcombinationsthereof

aretrademarksofAdvancedMicroDevices,Inc.

-ThisproductcomeswithRICOHBitmapFontsproducedand

soldbyRICOHCOMPANY,LTD.

-Allotherbrandandproductnamesaretrademarksor

registered trademarks of their respective holders.

-LanguageofOSDmenuusedinthismanualisEnglishby

way of example.

-Illustrationsinthismanualmaynotexactlyrepresentthe

actual product or display.

-Thismanualassumesuseinhorizontalorientation,except

wherespecicallynoted.

LED Backlight

● TheLEDbacklightinthisproducthasalimitedlifetime.

 *Ifthescreengetsdarkordoesnotturnon,itmaybe

necessarytoreplacetheLEDbacklight.ThisLED

backlight is exclusive to this product and must be replaced

byanauthorizedSharpservicingdealerorservicecenter.

 *PleasecontactyourlocalSharpservicingdealeror

service center for assistance.

TIPS AND SAFETY INSTRUCTIONS

MOUNTING PRECAUTIONS

• Thisproductisforuseindoors.

• Sincethemonitorisheavy,consultyourdealerbeforeinstalling,

removing or moving the monitor.

• Wheninstalling,removingormovingthemonitor,ensurethatthis

iscarriedoutbyatleast2people.

• AmountingbracketcompliantwithVESAspecicationsisrequired.

DonotuseanyscrewholesotherthanVESAholesforinstallation.

• Whenmovingthemonitor,besuretoholditwitheitherboth

handlesorthe4cornersonthebottomoftheunit.Donotplace

your hand on the screen. This may cause product damage, failure,

orinjury.

• Installthemonitorwiththesurfaceperpendiculartoalevelsurface.

• Mountingthemonitoronthewallrequiresspecialexpertiseand

theworkmustbeperformedbyanauthorizedSHARPdealer.You

should never attempt to perform any of this work yourself. Our

companywillbearnoresponsibilityforaccidentsorinjuriescaused

by improper mounting or mishandling.

• Thismonitorshouldbeusedatanambienttemperaturebetween

41°F(5°C)and95°F(35°C).Provideenoughspacearoundthe

monitor to prevent heat from accumulating inside.

For the monitor in horizontal orientation

7-7/8 [20]

Unit: inch [cm]

2 [5]

[5]

For the monitor in vertical orientation

Unit: inch [cm]

2 [5]

[5]

7-7/8 [20]

1-7/16 [3.5]

1-13/16 [4.5]

• Ifitisdifficulttoprovidesufficientspaceforanyreasonsuchas

the installation of the monitor inside a housing, or if the ambient

temperaturemaybeoutsideoftherangeof41°F(5°C)to95°F

(35°C),installafanortakeothermeasurestokeeptheambient

temperaturewithintherequiredrange.

• Temperatureconditionmaychangewhenusingthedisplay

togetherwiththeoptionalequipmentsrecommendedbySHARP.In

such cases, please check the temperature condition specified by

theoptionalequipments.

• Adheretothefollowingwheninstallingthemonitorinitsvertical

orientation.Failingtoadheretothefollowingmaycause

malfunctions.

-InstallthemonitorsuchthatthepowerLEDislocatedonthe

bottom side.

-SettheMONITORontheSETUPmenutoPORTRAIT.

(Seepage22.)

-Besuretoclampthepowercord(supplied)ontothecable

clampattachmentbelowusingthesuppliedcableclamp.When

clamping the power cord, take care not to stress the terminal of

thepowercord.Donotbendthepowercordexcessively.

Power cord (Supplied)

Cable clamp

Cable clamp attachment

• Donotblockanyventilationopenings.Ifthetemperatureinsidethe

monitor rises, this could lead to a malfunction.

• Aftermounting,pleasecarefullyensurethemonitorissecure,and

not able to come loose from the wall or mount.

• Donotplacethemonitoronadevicewhichgeneratesheat.

• Usethesuppliedverticalstickerwhenyouinstallthemonitorin

vertical orientation.

Operation panel

Logo

 Donotremovethefactory-afxedstickerbutafxthelogosticker

overit.Becarefulnottocovertheremotecontrolsensororbuttons.

• Besuretouseawall-mountbracketdesignedordesignatedfor

mounting the monitor.

• Thismonitorisdesignedtobeinstalledonaconcretewallorpillar.

Reinforced work might be necessary for some materials such as

plaster / thin plastic board / wood before starting installation.

This monitor and bracket must be installed on a wall which can

endure at least 4 times or more the weight of the monitor. Install by

the most suitable method for the material and the structure.

• Donotusetheproductinlocationswheretheunitisexposedto

direct sunlight or other strong light. Since this product operates

with infrared rays, such light may cause a malfunction.

■

Connecting the USB cable

Warning:

Contact your dealer or a service engineer to have the USB •

cable installed or removed.

Riskofelectricalshockorinjuryifyouattempttheworkyourself.

• BeforeconnectingtheUSBcable,turnoffthemainpowerswitch

and disconnect the power cable from the outlet.

• UseonlythesuppliedUSBcable.

■

Installing the power switch

Warning:

Contact your dealer or a service engineer to have the power •

switch installed or removed.

Riskofelectricalshockorinjuryifyouattempttheworkyourself.

1.Removethescrew(x1)fromthemonitor.

2.Removetheprotectivesealandconnectthepowerswitch

connector, making sure the connector is in the correct orientation.

3. Align the mounting brackets with the slot in the bottom of the unit

andtightenthescrews(x2).

 Makesurethatthemountingbracketsarermlysecured.

Take care that the cable is not caught or pinched.

4. Replace the screw that was removed in 1.

Bottom

Power switch

Mounting

bracket

Protective seal

Connector

Mounting

bracket

Forinformationonthetouchpaneldriver,seetheTouchPanelDriverOperationManual.ForinformationonthePenSoftware,

see the Pen Software Operation Manual.

Supplied Components

If any component should be missing, please contact your dealer.



LiquidCrystalDisplayMonitor:1



Remote control unit: 1



Cableclamp:2



Power cord



R-6battery(“AA”size):2



CD-ROM(UtilityDiskforWindows):1



Setup Manual: 1



Standholeprotectioncover:2

* SharpCorporationholdsauthorshiprightstotheUtilityDiskprogram.Donotreproduceitwithoutpermission.

* Forenvironmentalprotection!

 Donotdisposeofbatteriesinhouseholdwaste.Followthedisposalinstructionsforyourarea.



Verticalsticker(Operationpanel):1



Verticalsticker(Logo):1



Touch pen: 1



Pentip(fortouchpen):2



Touch pen battery

(LR-03(“AAA”size)):1



USBcable:1



Power switch: 1

System Requirements

To use the touch panel, the touch panel must be connected to a computer, and the touch panel driver and Pen Software must be

installedonthecomputerfromthesuppliedCD-ROM.Systemrequirementsforeachsoftwareprogramareasfollows.

Computer

PC/ATcompatiblecomputerwithaUSB1.1portandabletooutputaresolutionof1920x1080.

(CD-ROMdriverequiredforsoftwareinstallation.)

WindowsXP(32-bitor64-bitversion),WindowsVista(32-bitor64-bitversion),Windows7(32-bit

or64-bitversion)

CPU

IntelCeleronorAMDSempron1.6GHzorfaster

IntelCore2DuoorAMDAthlonIIX22.8GHzorfasterrecommended

Memory Atleast2GB(atleast1GBforWindowsXP)

Freespaceonharddrive Atleast100MB(freespaceseparatelyrequiredfordatastorage)

Toconnectthetouchpanelandinstallthetouchpaneldriver,seetheTouchPanelDriverOperationManual.

To install the Pen Software, see the Pen Software Operation Manual.

Contents

IMPORTANT INFORMATION ............................................1

DEAR SHARP CUSTOMER ..............................................3

SAFETY PRECAUTIONS ..................................................3

TIPS AND SAFETY INSTRUCTIONS ...............................5

MOUNTING PRECAUTIONS ............................................6

Supplied Components .....................................................7

System Requirements .....................................................7

Part Names .......................................................................8

Connecting Peripheral Equipment ...............................10

ConnectionwithaPCorAVequipment .....................10

ConnectionwhenthePN-ZB01(optional)

is attached ..................................................................11

Connecting the Power Cord .........................................12

Binding Cables ...............................................................12

Removing the Handles ..................................................12

AfxingtheStandHoleProtectionCovers .................13

Preparing the Remote Control Unit ..............................13

Installing the batteries ................................................13

Remote control operation range .................................13

Attaching the Holder .....................................................14

Turning Power On/Off ....................................................15

Turning on the main power.........................................15

Turning power on/off ..................................................15

Disablingpoweron/offoperations ..............................16

Preparing and Using the Touch Pen ............................17

Inserting the battery ...................................................17

Using the touch pen ...................................................17

Eraser .........................................................................17

Basic Operation .............................................................18

Menu Items .....................................................................20

Displayingthemenuscreen .......................................20

Menu item details .......................................................21

AdjustmentsforPCscreendisplay ............................26

Initialization (Reset)/Functional Restriction Setting

(FUNCTION) ....................................................................27

Controlling the Monitor with a PC (RS-232C) ..............28

PCconnection ............................................................28

Communicationconditions .........................................28

Communicationprocedure .........................................28

SettingoftheGAMMAuserdata ................................31

RS-232Ccommandtable ...........................................32

Controlling the Monitor with a PC (LAN) .....................38

Settings to connect to a LAN ......................................38

ControllingwithaPC ..................................................40

Troubleshooting .............................................................46

Specications ................................................................48



Eraser:1



Holder:1(With2hookandloopfasteners)



CoverSharplogo:1

Place this sticker onto the SHARP logo to

cover the logo.

Front view

5678

1. Touch pen ultrasonic sensor

2. Infrared transmitter/receiver

3. Touch panel power LED

4. Holder (Seepage14.)

5. Remote control sensor (Seepage13.)

6. Input switch (Seepage18.)

7. Power switch (Seepages6and15.)

8. Power LED (Seepage15.)

TIPS

• Useapointedobjectsuchasapentiptopressthe

switches at the operation panel.

Part Names

Rear view

19181716 20

13 15

1210

2221 2524

When the PN-ZB01 (optional)

is attached

1. Speakers

2. Vents

3. Handles (Seepage12.)

 4. Expansionterminalcover

Additional input/output terminals are available by attaching

thePN-ZB01interfaceexpansionboard(optional).

5. USB cable

6. Optional attachment section

This section is used to connect optional hardware for

function expansion. Offering this attachment location

is not a guarantee that future compatible hardware

attachments will be released.

7. AC input terminal (Seepage12.)

8. Main power switch (Seepage15.)

9. PC/AV HDMI input terminal (Seepage10.)

10. PC D-sub input terminal (Seepage10.)

11. Audio input terminal (Seepage10.)

12. Audio output terminals (Seepage10.)

13. RS-232C output terminal (Seepage10.)

14. RS-232C input terminal (Seepage10.)

15. Optional terminal

Thisterminalisprovidedforpossiblefuture(optional)

function expansion. Offering of this terminal is not a

guarantee that future expanded functionality will be

provided.

When the PN-ZB01 (optional) is attached

16. PC/AV DVI-D input terminal (Seepage11.)

17. PC/AV DVI-D output terminal (Seepage11.)

18. LAN terminal (Seepage11.)

19. Externalspeakerterminals(Seepage11.)

20. Audio 1 input terminals (Seepage11.)

21. Audio 2 input terminals (Seepage11.)

22. PC RGB input terminals (Seepage11.)

23. AV component input terminals (Seepage11.)

24. AV video input terminal (Seepage11.)

25. AV S-video input terminal (Seepage11.)

Caution

• ConsultyourSHARPdealerforattachment/detachmentof

optional parts.

• Donotopentheexpansionterminalcoverbyyourself.

There are high voltage parts inside the cover which may

cause an electric shock.

Part Names

Remote control unit

1. Signal transmitter

2. POWER button(Seepage15.)

3. MUTE button(Seepage18.)

4. VOL +/- buttons(Seepage18.)

BRIGHT +/- buttons(Seepage18.)

Cursor control (

/ / / ) buttons

5. DISPLAY button(Seepage18.)

6. MODE button(Seepage18.)

7. INPUT button(Seepage18.)

8. MENU button(Seepage18.)

9. SIZE button(Seepage18.)

Connecting Peripheral Equipment

Caution

• Besuretoturnoffthemainpowerswitchanddisconnect

the plug from the power outlet before connecting/

disconnecting cables. Also, read the manual of the

equipmenttobeconnected.

• Becarefulnottoconfusetheinputterminalwiththeoutput

terminal when connecting cables. Accidentally reversing

cables connected to the input and output terminals may

cause malfunctions and the other problems.

TIPS

• Whenusingthetouchpanel,connecttheUSBcableto

thecomputer.Fordetails,seetheTouchPanelDriver

Operation Manual.

• Imagesmaynotbedisplayedproperlydependingonthe

computer(videocard)tobeconnected.

• Ascreenwith1920x1080resolutionmaynotbedisplayed

correctlyonPCRGB.Inthiscase,checkthesettingsof

yourcomputer(videocard)toverifythatinputsignals

conformtospecicationsofthismonitor.(Seepage50.)

• IfthereisacheckboxtodisableEDIDindisplaycontrol

panel,checkitwhenusingPCRGB.

• UsetheautomaticscreenadjustmentwhenaPCscreen

isdisplayedforthersttimeusingPCD-SUBorPCRGB,

orwhenthesettingofthePCischanged.Thescreenis

adjustedautomaticallywhenSELFADJUSTintheOPTION

menu is set to ON.

• Iftheaudiooutputfromtheplaybackdeviceisconnected

directly to speakers or other devices, the video on the

monitor may appear delayed from the audio portion.

Audio should be played through this monitor by connecting

the playback device to the monitor’s audio input, and

connecting the monitor’s audio output to the speakers or

other devices.

• Theaudioinputterminalsusedineachinputmodeare

factory-setasfollows.

Input mode

Audio input terminal

(Factory setting)

PCD-SUB,PCDVI-D,

PCRGB

Audio input terminal

AVDVI-D Audio1 input terminal

AVCOMPONENT,

AVS-VIDEO,AVVIDEO

Audio2inputterminal

PCHDMI,AVHDMI PC/AVHDMIinputterminal

Connection with a PC or AV equipment

1. PC/AV HDMI input terminal

• UseacommerciallyavailableHDMIcable(conformingto

theHDMIstandard).

• SetHDMIofINPUTSELECTontheOPTIONmenu

according to the device to be connected.

• SelecttheaudioinputterminaltobeusedinPCHDMI

orAVHDMIofAUDIOSELECTontheOPTIONmenu.

WhenHDMIisselected,connectiontotheaudioinput

terminal is unnecessary.

2. PC D-sub input terminal

• WhenthePN-ZB01(optional)isattached,selecttheaudio

inputterminaltobeusedinPCD-SUBofAUDIOSELECT

on the OPTION menu.

3. Audio input terminal

• Useanaudiocablewithoutresistance.

• WhenthePN-ZB01(optional)isattached,settheaudio

inputterminalusedforeachinputmodeinAUDIO

SELECTontheOPTIONmenu.

4. Audio output terminals

• Theoutputsoundvariesdependingontheinputmode.

• Thevolumeoftheoutputsoundcanbexedbysetting

AUDIOOUTPUT(RCA)ontheOPTIONmenu.

• Itisnotpossibletocontrolthesoundoutputfromthe

audiooutputterminalswiththeAUDIOmenu.

5. RS-232C input terminal

RS-232C output terminal

• YoucancontrolthemonitorfromaPCbyconnectinga

commerciallyavailableRS-232straightcablebetween

theseterminalsandthePC.

When the PN-ZB01 (optional)

is attached

1312146

811

7109

Connecting Peripheral Equipment

Connection when the PN-ZB01

(optional) is attached

ThePN-ZB01expansionboard(optional)allowstheuseof

additional connection terminals.

6. PC/AV DVI-D input terminal

• SetDVIofINPUTSELECTontheOPTIONmenu

according to the device to be connected.

• SelecttheaudioinputterminaltobeusedinPCDVI-Dor

AVDVI-DofAUDIOSELECTontheOPTIONmenu.

7. PC RGB input terminals

• SetBNCofINPUTSELECTontheOPTIONmenutoPC

RGBwhenusingthePCRGBinputterminals.

• SelecttheaudioinputterminaltobeusedinPCRGBof

AUDIOSELECTontheOPTIONmenu.

8. AV component input terminals

• SetBNCofINPUTSELECTontheOPTIONmenuto

AVCOMPONENTwhenusingtheAVcomponentinput

terminals.

• SelecttheaudioinputterminaltobeusedinAV

COMPONENTofAUDIOSELECTontheOPTIONmenu.

9. AV video input terminal

• SelecttheaudioinputterminaltobeusedinAVVIDEOof

AUDIOSELECTontheOPTIONmenu.

10. AV S-video input terminal

• SelecttheaudioinputterminaltobeusedinAVS-VIDEO

ofAUDIOSELECTontheOPTIONmenu.

11. Audio1 input terminals / Audio2 input terminals

• Settheaudioinputterminaltobeusedineachinput

modeinAUDIOSELECTontheOPTIONmenu.

12. LAN terminal

• YoucancontrolthemonitorfromaPConanetworkby

connecting a commercially available LAN cable between

this terminal and a network.

13. Externalspeakerterminals

• Touseexternalspeakers,setSPEAKERSELECTonthe

SETUPmenutoEXTERNAL.

• Besuretouseexternalspeakerswithanimpedanceof6Ω

orgreaterandaratedinputofatleast10W.

132

Approx.

3-15/16 inch

(10 cm)

1.Attachaspeakercablecore(includedwiththePN-ZB01)to

the end of the speaker cable connected to the monitor.

2.Whilepushingthetab,insertthetipofthecable.

3. Release the tab.

TIPS

• Besuretoconnectthe+and-terminalsandtheleftand

right speakers properly.

• Avoidshortcircuitingthe+and-terminals.

• WhenSPEAKERSELECTissettoEXTERNAL,the

internal speakers are disabled.

14. PC/AV DVI-D output terminal

• ThevideoofthePC/AVDVI-Dinputcanbeoutputtoan

external device.

• OutputtingHDCP-encryptedvideorequiresanexternal

devicewhichsupportsHDCP.

• Thisterminalallowsthedaisychainconnectionofupto5

monitors.

TIPS

• Thelengthofthesignalcablesorsurroundingenvironment

mayaffecttheimagequality.

• Thescreenmaynotdisplayproperlywhenusingterminals

otherthanPCDVI-D/AVDVI-Dfortheinputmode.Inthis

case, turn off the power to all the monitors connected in a

daisy chain and then turn the power on again.

• WhenconnectingmonitorsinadaisychainsetAUTO

INPUTCHANGEtoOFF.

• Videooutputisdisabledinthefollowingcases:

WhentheinputmodeisPCHDMI/AVHDMI

WhenPIPSOURCEofthePIP/PbyPmenuissettoPC

HDMIorAVHDMI

Whenthepoweristurnedoff

Whenthemonitorisininputsignalwaitingmode

Connecting the Power Cord

Caution

• Donotuseapowercordotherthantheonesuppliedwith

the monitor.

1. Turn off the main power switch.

2.Plugthepowercord(supplied)intotheACinputterminal.

3.Plugthepowercord(supplied)intotheACpoweroutlet.

Binding Cables

The cables connected to the terminals on the rear of the

monitor can be fastened with the cable clamp.

Insert the cable clamp into the cable clamp attachment on the

rear of the monitor and fasten the cables.

AC input terminal

Main power switch

Power cord (Supplied)

For power

outlet

Removing the Handles

The handles can be removed.

The removable handles can be attached on the rear side.

Caution

• Theremovablehandlesandhandlescrewsareforusewith

thismonitor.Donotusethemforanyotherdevices.

• Toattachhandles,besuretousethehandlesandhandle

screws which were removed from the monitor.

• Besurethehandlesareattachedsecurely.

Handle

Handle screws

Handle

Handle screws

Cable clamp

attachment

Cable

Preparing the Remote Control Unit

Installing the batteries

1. Press the cover gently and slide it in the direction of the

arrow.

2. Seetheinstructionsinthecompartmentandputinthe

suppliedbatteries(R-6(“AA”size)x2)withtheirplus(+)

andminus(-)sidesorientedcorrectly.

3. Closethecover.

TIPS

• Whenthebatteriesbecomeexhausted,replacethemwith

new(commerciallyavailable)batteries.

• Thesuppliedbatteries(R-6(“AA”size)x2)maybecome

exhaustedquicklydependingonhowtheyarestored.

• Ifyouwillnotbeusingtheremotecontrolforalongtime,

remove the batteries.

• Usemanganeseoralkalinebatteriesonly.

Remote control operation range

The operation range of the remote control unit is approx. 16.4

feet(5m)atanangleofapprox10°fromthecentertothetop/

bottom/right/left of the remote control sensor.

10°10°

10°

Remote control

sensor

16.4 feet

(5 m)

TIPS

• Donotexposetheremotecontrolunittoshockbydropping

or stepping on it. This could lead to a malfunction.

• Donotexposetheremotecontrolunittoliquids,anddonot

place it in an area with high humidity.

• Theremotecontrolunitmaynotworkproperlyiftheremote

control sensor is under direct sunlight or strong lighting.

• Objectsbetweentheremotecontrolunitandtheremote

control sensor may prevent proper operation.

• Replacethebatterieswhentheyrunlowasthismay

shorten the remote control’s operation range.

• Ifauorescentlightisilluminatedneartheremotecontrol

unit, it may interfere with proper operation.

• Donotuseitwiththeremotecontrolofotherequipment

such as air conditioner, stereo components, etc.

AfxingtheStandHoleProtectionCovers

Afterinstallingthemonitor,afxthestandholeprotection

covers as necessary.

1. Peeloffthebackingsheetandafxthecoveronthe

monitor.

Attaching the Holder

The touch pen, remote control unit, and eraser can be stored

in the holder.

Touch pen

Remote control unit

and Eraser

1. Removethepeel-offsheetsfromthefastenersontheback

side of the holder.

2. Withtheholderspreadtaut,afxittothesideofthe

monitor.

Back side

Turning Power On/Off

Caution

• TurnonthemonitorrstbeforeturningonthePCor

playback device.

Turning on the main power

Main power switch

Caution

• Themainpowermustbeturnedon/offwiththemainpower

switch.Donotconnect/disconnectthepowercordorturn

the breaker on/off while the main power switch is on.

• WhenswitchingthemainpowerswitchorthePOWER

buttonoffandbackon,alwayswaitforatleast5seconds.

• Foracompleteelectricaldisconnection,pulloutthemain

plug.

Turning power on/off

PressthePOWERbuttonorPOWERswitchtoturnthepower

ON/OFF.

Power LED

Touch panel power LED

• StatusofthepowerLED

Status Status of the monitor

Greenlit Power on

Orange lit Poweroff(Standbymode)

Greenashing Input signal waiting mode

• StatusofthetouchpanelpowerLED

Status Status of the touch panel

Greenlit Operating normally

Blinkingorange

Alternately blinking green and

orange

Initializing

Off

Touchpaneloff(powernot

supplied,etc.)

Caution

• WhenswitchingthemainpowerswitchorthePOWER

buttonoffandbackon,alwayswaitforatleast5seconds.

A short interval may result in a malfunction.

• WhenthetouchpanelpowerLEDblinksorangeor

alternately blinks green and orange, the touch panel is

beinginitialized.Donottouchthetouchpanelatthistime.

Touching the touch panel may cause malfunctioning.

TIPS

• Whenthemainpowerswitchisoff,themonitorcannotbe

turned on.

• Ifthemonitorisintheinputsignalstandbymodeandyou

pressthePOWERbuttonontheremotecontrolunit,the

monitor enters standby mode.

• SettingtheSCHEDULEashesthepowerLEDalternately

in red and orange in standby mode.

Date/time setting

• Ifthetimehasyettobesetwhenthemonitorisrstturned

on, the date/time setting screen appears. Set the date and

time.

DATE/TIME SETTING

SET

CANCEL

OK···[MENU]

00 00

: :

1. Press , , or to select the date and

time, and press

or to change the numerical

values.

2. SelectSETandthenpress

• Besuretosetthedateandtime.

• Thedate/timesettingscreenwillcloseautomaticallyifno

operationisperformedforabout15seconds.Thedate

andtimecanbesetusingDATE/TIMESETTINGfrom

the OPTION menu when the date/time setting screen

disappears.

TIPS

•

Setthedatein“Year/Month/Day”order.

•

Setthetimeona24-hourbasis.

•

The clock is maintained by the internal battery.

•

If you already set the time but the date/time setting

screen appears when the power is turned on, the

internal battery may be exhausted. Please contact

your local Sharp servicing dealer or service center for

assistance with battery replacement.

•

Estimatedservicelifeoftheinternalbattery:About5

years(dependingonmonitoroperation)

•

Astherstbatterywasinsertedatthefactory,itmaybe

exhausted prior to the expected continuous operation

life.

Turning Power On/Off

Disabling power on/off operations

Power on/power off operations can be disabled in order to

protect the monitor from an accidental power off. Set the

ADJUSTMENTLOCKinFUNCTIONmenuto“2”.(Seepage

27.)

Preparing and Using the Touch Pen

Inserting the battery

1. Rotate the battery cap and remove it, and then pull out the

cover.

Battery cap

2. Insertthesuppliedbattery(LR-03(“AAA”size))inthe

orientation shown, and attach the cover and battery cap.

TIPS

• IfthebatteryindicatordoesnotilluminatewhenFunction

Button1orFunctionButton2ispressed,thebatteryis

exhausted. Replace the battery with a new commercially

available battery.

• Thesuppliedbattery(LR-03(“AAA”size))maybe

exhausted in a short time, depending on how it was stored.

• Ifthetouchpenwillnotbeusedforanextendedtime,

remove the battery from the touch pen.

• Forthebattery,useanalkalinebattery.

Using the touch pen

The touch pen can be used to perform the same operations

as a mouse.

Whenthetouchpanelistouchedwiththepen,theinputmode

changestopenmode.Whentouchedwithyournger,the

input mode changes to handwriting mode. The input mode is

set by default to change automatically.

Caution

• Donotusethetouchpenforanypurposeotherthantouch

panel operation.

• Donotpresshardonthepentip.

• Donotcovertheultrasonictransmitterwithyourhandor

nger.

• Operationwillnottakeplacecorrectlyifthereisanobstacle

between the infrared transmitter/receiver and the touch pen

oryournger.Operationwillnottakeplacecorrectlyifyour

ngersoryoursleeveisnearthescreen.

• Ifthetouchpenisheldtooatagainstthescreen,the

touch position may not be correctly detected.

• Donotstorewiththepentiporfunctionbuttonpressed.

The battery will be exhausted.

• Donotusenearadevicethatemitsultrasonicwaves.The

touch pen uses ultrasonic waves and may not operate

correctly.

• Iftwotouchpanelsareusedincloseproximitytoeach

other, use handwriting mode. The touch pens will interfere

with each other and will not operate correctly.

• Ifthereisdirtorforeignmatteronthetipofthetouchpen,

removeit.Foreignmattermaydamagethescreen.

Pen tip

Function Button 2

Function Button 1

Ultrasonic transmitter

Battery indicator

Touchingwiththepentiporyournger…

Same as clicking the left mouse button.

Touchingtwicequicklyisthesameasdouble-clickingtheleft

mouse button.

PressingFunctionButton1…

Same as clicking the right mouse button.

The battery indicator illuminates.

PressingFunctionButton2…

CausesthefunctionsetinthePenSoftwaretooperateinthe

Pen Software.

The battery indicator illuminates.

Movingthepentiporyourngerwithittouchingthe

screen…

Same as dragging.

TIPS

• Thetouchpanelinputmode,theactionsofthefunction

buttons, and other settings related to touch panel operation

canbechangedinthetouchpaneldriver.Fordetails,see

theTouchPanelDriverOperationManual.

• Whendoubleclickingwithyournger,makesureyour

ngerleavesthescreensufcientlyafterthersttouch.If

thereisnotsufcientdistancebetweenyourngerandthe

screen, double clicking will not take place.

• FortheproceduresforusingthetouchpeninthePen

Software, see the Pen Software Operation Manual.

• UseFunctionButton1andFunctionButton2nearthefront

of the screen. If too far away, operation will not be possible.

• PressFunctionButton1andFunctionButton2slowly

andrmly.Ifpressedtooquickly,theactionwillnotbe

recognized.

• Ifthepentipbecomeswornordamaged,replaceit.Pull

out the old pen tip and insert a new pen tip.

Eraser

TheeraserisusedwiththePenSoftware.Fortheprocedure

for using the eraser, refer to the Pen Software Operation

Manual.

Caution

• Whenusingtheeraser,gentlybringtheclothsideinto

contact with the screen. Touching the screen with one of

thenon-clothsideswilldamagethescreen.

• Ifthereisanydirtorforeignmatteronthesurfacethat

contactsthescreen,removeit.Foreignmattermaydamage

the screen.

Basic Operation

1. INPUT (Input mode selection)

The menu is displayed. Press

or to select the input

mode, and press

to enter.

* Youcanselecttheinputterminalbypressingtheinput

switch of the monitor.

Input mode Video Audio

PCD-SUB PCD-subinputterminal

Audio input terminal

PCHDMI

PC/AVHDMIinputterminal

AVHDMI

PC/AVHDMIinputterminal

When the PN-ZB01 (optional) is attached

Input mode Video Audio

PCDVI-D

PC/AVDVI-Dinputterminal

PCHDMI

PC/AVHDMIinputterminal

PCD-SUB

PCD-subinputterminal

PCRGB

PCRGBinputterminals

AVDVI-D

PC/AVDVI-Dinputterminal

AVHDMI

PC/AVHDMIinputterminal

AVCOMPONENT

AVCOMPONENTinputterminals

AVS-VIDEO AVS-videoinputterminal

AVVIDEO AVvideoinputterminal

*1 SelecttheterminaltobeusedinHDMIofINPUTSELECT.

(Seepage23.)

*2 SelecttheterminalforAUDIOSELECTwhichisusedfor

audioinput.(Seepage23.)

*3 SelecttheterminaltobeusedinDVIofINPUTSELECT.

(Seepage23.)

*4 SelecttheterminaltobeusedinBNCofINPUTSELECT.

(Seepage23.)

2. MUTE

Turns off the volume temporarily.

PresstheMUTEbuttonagaintoturnthesoundbacktothe

previous level.

3. MENU

Displaysandturnsoffthemenuscreen(seepage20).

4. VOL +/- (Volume adjustment)

Pressing

or displaystheVOLUMEmenuwhenthe

menu screen is not displayed.

V OLUME 15

Press or toadjustthevolumeofthesound.

* Ifyoudonotpressanybuttonsforabout4seconds,the

VOLUMEmenuautomaticallydisappears.

5. BRIGHT +/- (Backlight adjustment)

Pressing

or displaystheBRIGHTmenuwhenthe

menu screen is not displayed.

BRIGHT 15

Press or toadjustthebrightness.

* Ifyoudonotpressanybuttonsforabout4seconds,the

BRIGHTmenuautomaticallydisappears.

6. SIZE (Screen size selection)

The menu is displayed.

Press

or toselectthescreensize.(Seepage19.)

7. DISPLAY

Displaysmonitorinformation.Whenyoupressthisbutton

again, the display disappears.

WhenthePN-ZB01(optional)isattached,thedisplaychanges

fromINFORMATION1→INFORMATION2→cleardisplay,

and so on every time you press this button.

• Thedisplaydisappearsautomaticallyafterabout15

seconds.

•

LAN

is displayed during LAN communication.

• If

LAN

is displayed in red, there is a duplicate IP address.

8. MODE (Color mode selection)

Eachtimeyoupressthisbutton,thecolormodechangesin

the following order:

STD(Standard)→VIVID→sRGB→STD...

• sRGBappliestoPCinputonly.

 sRGBisinternationalstandardofcolorrepresentation

speciedbyIEC(InternationalElectrotechnical

Commission).Colorconversionismadeintakingaccount

ofliquidcrystal’scharacteristicsandrepresentscolortone

close to its original image.

Page is loading ...

Sharp PN-L601B Operating instructions

Brand: Sharp

Model: PN-L601B

Type: Operating instructions

This manual is also suitable for

PNL601B

Download PDF

report

Sharp PN-L601B Operating instructions

This manual is also suitable for

Sharp PN-L601B Operating instructions

Related papers

Other documents