2. Toro
  3. 26in Dual Tire Kit, Pro Sneak 360 Vibratory Plow

Toro 26in Dual Tire Kit, Pro Sneak 360 Vibratory Plow, 23in Dual Tire Kit, Pro Sneak 360 Vibratory Plow Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro 26in Dual Tire Kit, Pro Sneak 360 Vibratory Plow Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3397-456RevA
23inand26inDualTireKit
ProSneak360and365VibratoryPlow
ModelNo.25423
ModelNo.25423E
ModelNo.25424
ModelNo.25424E
InstallationInstructions
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Wheelassembly4
Adaptorplate4
Bolt4
Lugnuts20
Installthedualwheels.
WARNING
CALIFORNIA
Proposition65Warning
Thisproductcontainsachemicalorchemicals
knowntotheStateofCaliforniatocausecancer,
birthdefects,orreproductiveharm.
InstallingtheDualWheels
1.Parkthemachineonalevelsurfaceandstoptheengine.
2.Raiseonesideofthemachinesothattheweightisoff
thewheels;supportthemachinewithjackstands.
WARNING
Mechanicalorhydraulicjacksmayfailto
supportmachineandcauseaseriousinjury.
•Usejackstandswhensupportingmachine.
•Donotusehydraulicjackstosupportthe
machine.
3.Removethelugnutsfromoneofthewheels(BoxA
ofFigure1).
4.Rotatethewheelsintothenarrowconguration,if
theyarenotalreadysocongured(BoxBofFigure1).
RefertoRotatingtheWheelsintheOperator’sManualof
yourProSneakmachine.
Figure1
5.Installanadaptorplateontothewheelhubandsecure
itwiththelugnuts(BoxCofFigure1).
Note:Donottightenthenutsaroundthewheelina
clockwiseorcounterclockwiseorder.Instead,tighten
theminastarpattern,proceedingtothenutacrossthe
wheelfacefromthe1justtightened.
6.Torquethelugnutsto108to135N-m(80to100ft-lb).
©2015—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3397-456*A
7.Alignthetabsonthedualwheelwiththeslotsinthe
adaptorplate(BoxAofFigure2).
Figure2
8.Installthedualwheeltotheadaptorplateusingalarge
boltwiththread-lockingadhesive(BoxBofFigure2).
Torquetheboltto610to623N-m(450to460ft-lb).
Note:Ensurethatthetreadonthedualwheelis
pointinginthesamedirectionastheotherwheel.
9.Repeatthisprocedurefortherestofthewheels.
10.Checkthetirepressureinall8tires,llingthemtothe
appropriatepressureaslistedinthefollowingtable:
TireSize
Pressure
kPapsi
23x10.5x1213820
26x12x1220730
Important:Checkthetorqueonthelargeboltsafter
20to40operatinghours.
2
/