FormNo.3397-456RevA
23inand26inDualTireKit
ProSneak360and365VibratoryPlow
ModelNo.25423
ModelNo.25423E
ModelNo.25424
ModelNo.25424E
InstallationInstructions
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Wheelassembly4
Adaptorplate4
Bolt4
Lugnuts20
Installthedualwheels.
WARNING
CALIFORNIA
Proposition65Warning
Thisproductcontainsachemicalorchemicals
knowntotheStateofCaliforniatocausecancer,
birthdefects,orreproductiveharm.
InstallingtheDualWheels
1.Parkthemachineonalevelsurfaceandstoptheengine.
2.Raiseonesideofthemachinesothattheweightisoff
thewheels;supportthemachinewithjackstands.
WARNING
Mechanicalorhydraulicjacksmayfailto
supportmachineandcauseaseriousinjury.
•Usejackstandswhensupportingmachine.
•Donotusehydraulicjackstosupportthe
machine.
3.Removethelugnutsfromoneofthewheels(BoxA
ofFigure1).
4.Rotatethewheelsintothenarrowconguration,if
theyarenotalreadysocongured(BoxBofFigure1).
RefertoRotatingtheWheelsintheOperator’sManualof
yourProSneakmachine.
Figure1
5.Installanadaptorplateontothewheelhubandsecure
itwiththelugnuts(BoxCofFigure1).
Note:Donottightenthenutsaroundthewheelina
clockwiseorcounterclockwiseorder.Instead,tighten
theminastarpattern,proceedingtothenutacrossthe
wheelfacefromthe1justtightened.
6.Torquethelugnutsto108to135N-m(80to100ft-lb).
©2015—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3397-456*A