INTRODUCTION
The
SHOP FOX
®
Air Regulator w/Gauge
is great
for controlling air pressure in pneumatic systems.
SETUP
The Model D3279 (
Figure 1
) accepts
1
⁄
4
⁄4⁄
" NPT
threads. Mount the regulator as close as possible to
the air tool.
ADJUSTMENT
The Model D3279 features a locking control knob.
Pull the knob “
OUT
” to unlock the knob then turn
it to adjust the pressure, and push the knob “
IN
” to
lock the control knob in place.
DO NOT adjust the
regulator over 150 PSI!
MAINTENANCE
Always make sure your pneumatic system is free of
moisture and dirt. Also make sure all connections
are secure and the quick-disconnects are free from
dirt or debris before connecting.
CUSTOMER SERVICE
For questions contact Woodstock International
Technical Support at (360) 734-3482, or send e-
mail to: tech-support@shopfox.biz.
Figure 2.
Typical air line layout, showing
placement of the regulator.
Instruction Sheet
Model D3279
Air Regulator w/Gauge
1
⁄4'' NPT
1
⁄4'' NPT
AIRFLOW
Air Tool
Regulator
Quick
Disconnect
Supply
Air Line
Figure 1.
Model D3279.
COPYRIGHT © APRIL 2004 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS DOCUMENT MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
PRINTED IN CHINA.
MAINTENANCE NOT
E
During the life of the regulator, if you hear
any air seepage from the round vent hole at
the rear of the regulator housing, the control
knob seat may have inadvertently come loose
from the regulator housing.
For correction see Figure 1, disconnect from
air pressure, and merely loosen the seat lock
ring a few turns, and with the control knob
locked in position, turn the control knob so
the control knob seat bottoms out in the
regulator housing. Then re-tighten the seat
lock ring against the housing and readjust the
regulator air PSI if required.
1
2
4
5
7
8
9
A
6
3
A
10
11
13
12
21
22
20
14
15
17
16
A-A
1819
D3279 Parts Diagram
REF PART # DESCRIPTION
1 XD3279001 CONTROL KNOB
2 XD3279002 PRESSURE CONTROL KNOB
3 XD3279003 ADJUSTMENT NUT
4 XD3279004 ADJUSTMENT SCREW
5 XD3279005 COMPRESSION SPRING
6 XD3279006 SEAT LOCK RING
7 XPEC02M SNAP RETAINER
8 XD3279008 CONTROL KNOB SEAT
9 XD3279009 SPACER
10 XD3279010 ADJ. PRESSURE WASHER
11 XD3279011 STOP RING
1 XD3279001 CONTROL KNOB
2 XD3279002 PRESSURE CONTROL KNOB
3 XD3279003 ADJUSTMENT NUT
4 XD3279004 ADJUSTMENT SCREW
5 XD3279005 COMPRESSION SPRING
6 XD3279006 SEAT LOCK RING
7 XPEC02M SNAP RETAINER
8 XD3279008 CONTROL KNOB SEAT
9 XD3279009 SPACER
10 XD3279010 ADJ. PRESSURE WASHER
11 XD3279011 STOP RING
1 XD3279001 CONTROL KNOB
2 XD3279002 PRESSURE CONTROL KNOB
3 XD3279003 ADJUSTMENT NUT
4 XD3279004 ADJUSTMENT SCREW
5 XD3279005 COMPRESSION SPRING
6 XD3279006 SEAT LOCK RING
7 XPEC02M SNAP RETAINER
8 XD3279008 CONTROL KNOB SEAT
9 XD3279009 SPACER
10 XD3279010 ADJ. PRESSURE WASHER
11 XD3279011 STOP RING
REF PART # DESCRIPTION
12 XD3279012 O-RING 2.4 X 1.8 MM
13 XD3279013 ADJ. PRESSURE STEM
14 XD3279014 ADJ. PRESSURE SPRING
15 XD3279015 O-RING 13.7 X 2.4 MM
16 XD3279016 ADJUSTMENT SCREW SEAT
17 XD3279017 JOINT
18 XD3279018 JOINT NUT
19 XD3279019 CLOSE NUT
20 XD3279020 PRESSURE SEAT
21 XD3279021 AIR INLET PLUG
22 XD3279022 PRESSURE GAUGE
12 XD3279012 O-RING 2.4 X 1.8 MM
13 XD3279013 ADJ. PRESSURE STEM
14 XD3279014 ADJ. PRESSURE SPRING
15 XD3279015 O-RING 13.7 X 2.4 MM
16 XD3279016 ADJUSTMENT SCREW SEAT
17 XD3279017 JOINT
18 XD3279018 JOINT NUT
19 XD3279019 CLOSE NUT
20 XD3279020 PRESSURE SEAT
21 XD3279021 AIR INLET PLUG
22 XD3279022 PRESSURE GAUGE
12 XD3279012 O-RING 2.4 X 1.8 MM
13 XD3279013 ADJ. PRESSURE STEM
14 XD3279014 ADJ. PRESSURE SPRING
15 XD3279015 O-RING 13.7 X 2.4 MM
16 XD3279016 ADJUSTMENT SCREW SEAT
17 XD3279017 JOINT
18 XD3279018 JOINT NUT
19 XD3279019 CLOSE NUT
20 XD3279020 PRESSURE SEAT
21 XD3279021 AIR INLET PLUG
22 XD3279022 PRESSURE GAUGE
/
