2. Seville Classics
  3. WEB493

Seville Classics WEB493 User manual

  • Hello! I am an AI chatbot trained to assist you with the Seville Classics WEB493 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What are the dimensions of the organizer cart?
    Can the cart be used without the casters?
    How much weight can each drawer hold?
    What is the weight capacity of the top shelf?
    What is the total weight capacity of the cart?
Thank you for choosing Seville Classics! We hope that you enjoy your
organizer cart. Please read through this user guide for parts list,
assembly instrucons, frequently asked quesons and contact info.
Model #: WEB493
8-Drawer Storage Bin Organizer Cart
White/Gray/Black Gradient
FAQs
Q. How big is it?
A. Unit measures 12.8" W x 15.35" D x 38.19" H
Q. Can I use it without the casters?
A. No, the cart is not designed to be used without the casters.
Q. How much weight can it hold?
A. Weight capacity per shallow drawer: 3.3 lbs. (1.5 kgs)
Weight capacity per deep drawer: 4.4 lbs. (2 kgs)
Weight capacity on top shelf: 16.5 lbs. (7.5 kgs)
Total weight capacity: 45.1 lbs. (20.5 kgs)
Customer Service Informaon
Telephone: (800) 323-5565
Fax: (310) 533-3899
Hours: 8:30 AM – 4:30 PM (PST)
Email: [email protected]
Homepage: www.SevilleClassics.com
Step 5. Final Steps
Slide the drawers into the metal channels and
clip the SHELF (C) onto the crossbars.
Congratulaons!
Enjoy your new organizer cart!
Parts List
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
(800) 323-5565 or send an email to [email protected]om
Assembly Instrucons
Step 1. Aach Casters
Make sure channels on each
SIDE FRAME (A) face each other.
Push the SLEEVES (F) into the
boom poles of a SIDE FRAME (A).
Push one CASTER (G) and one
LOCKING CASTER (H) into the
SLEEVES (F).
Repeat for other SIDE FRAME (A).
Step 2. Aach Crossbars
Fit a BOLT (I) through a bolt hole
on the SIDE FRAME (A).
Fit a WASHER (J) over the bolt
threads. Be sure the curved side of
the washer is ush with frame.
Hold BOLT (I) and WASHER (J) ush
against frame. Screw on a CROSS-
BAR (B) by hand.
Hold CROSSBAR (B) and ghten
BOLT (I) unl snug with ALLEN
WRENCH (M).
Repeat for remaining bolt holes.
Step 3. Connect Side Frames
Aach second SIDE FRAME (A) to
CROSSBARS (B) and WASHERS (J).
Tighten with ALLEN WRENCH (M).
Step 4. Assemble Drawers
Aach DRAWER PULL KNOBS (L) to
all DRAWERS (D,E) with SCREWS
(K) and screwdriver.
A. Side frame (2)
B. Crossbar (4)
C. Shelf (1)
D. Shallow drawer (6)
E. Deep drawer (2)
F. Sleeves (4)
G. Caster (2)
H. Locking caster (2)
I. Bolt (8)
J. Washer (8)
K. Screw (8)
L. Drawer Pull Knob (8)
M. Allen Wrench
/