1
Installation Instructions for
Huntley 3, 5, and 9 Light Chandelier
1.2
F2923-3-F2924-5-F2925-3-6
Chandelier
F2923/3, F2924/5, F2925/3+6
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant
junction boxes.
This product is safety listed for dry locations only.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Screw the long stem to the top of fixture.
Place the decorative washer onto the bottom of the fixture and secure it in place by screwing on the short stem.
Install the finial by screwing it onto the short stem (for cylindrical finial option, leave out the installation of the short stem).
Place the shade and spacer over the socket, then secure them by tightening the collar nut onto the socket using the shade
tool; repeat for remaining sockets.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
1
2
3
4
1A
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
DECORATIVE WASHER
5
2
5
6
6
LAMP
SOCKET
SHADE
LONG STEM
COLLAR NUT
SHADE TOOL
1
4
SPACER
SHORT STEM
FINIAL
3
FIXTURE