Popsockets 201000 Installation guide

Brand
Popsockets
Model
201000
Category
Holders
Type
Installation guide
Collapse the PopSocket grip-stand
in order for the PopClip mount to
properly hold the grip-stand.
MOUNTING YOUR
POPCLIP MOUNT
Install your PopClip
mount at room temperature.
Decide where youʼd like to
place your mount before
installing - you can only
mount it once!
Clean your chosen spot
before installation.
WILL NOT STICK
TO ARMOR ALL®!
Let cleaned area dry before
attaching your mount. Press
firmly for 12 seconds.
PopSockets LLC is not responsible for:
•Any damage to any surface caused by
the use or installation of your mount.
•Any discoloration resulting from
the installation and removal
of your mount.
Wait 8 hours before
mounting your phone.
READ BEFORE
INSTALLING!
Use fishing line or dental floss in a
sawing motion to cut the adhesive away
from surface.
Donʼt reuse
the adhesive.
REMOVING YOUR
POPCLIP MOUNT
1 extra 3M™ adhesive
  • Page 1 1

Popsockets 201000 Installation guide

Brand
Popsockets
Model
201000
Category
Holders
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents