MORLEY MTBH2 is a wah pedal with switchless operation, meaning you simply step on to engage Wah and step off to go to bypass. It also has a Contour switch that selects a second Wah mode, and a Level knob that adjusts the output of the Wah in Bad Horsie and Contour Modes. The Contour knob adjusts Wah frequency when in Contour Mode.
The MTBH2 is powered by a 9V battery or a 9VDC 300mA regulated adapter (center negative). It has a Deep Red Base, Glow-In-The-Dark Treadle Grip, and Glow-In-The-Dark Toe End Logo.
Here are some possible use cases for the MORLEY MTBH2:
MORLEY MTBH2 is a wah pedal with switchless operation, meaning you simply step on to engage Wah and step off to go to bypass. It also has a Contour switch that selects a second Wah mode, and a Level knob that adjusts the output of the Wah in Bad Horsie and Contour Modes. The Contour knob adjusts Wah frequency when in Contour Mode.
The MTBH2 is powered by a 9V battery or a 9VDC 300mA regulated adapter (center negative). It has a Deep Red Base, Glow-In-The-Dark Treadle Grip, and Glow-In-The-Dark Toe End Logo.
Here are some possible use cases for the MORLEY MTBH2:
MORLEY MTBH2 is a wah pedal with switchless operation, meaning you simply step on to engage Wah and step off to go to bypass. It also has a Contour switch that selects a second Wah mode, and a Level knob that adjusts the output of the Wah in Bad Horsie and Contour Modes. The Contour knob adjusts Wah frequency when in Contour Mode.
The MTBH2 is powered by a 9V battery or a 9VDC 300mA regulated adapter (center negative). It has a Deep Red Base, Glow-In-The-Dark Treadle Grip, and Glow-In-The-Dark Toe End Logo.
Here are some possible use cases for the MORLEY MTBH2:
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI