MORLEY MTBH2 Owner's manual

MORLEY
Brand
MORLEY
Model
MTBH2
Category
Guitar accessories
Type
Owner's manual

MORLEY MTBH2 is a wah pedal with switchless operation, meaning you simply step on to engage Wah and step off to go to bypass. It also has a Contour switch that selects a second Wah mode, and a Level knob that adjusts the output of the Wah in Bad Horsie and Contour Modes. The Contour knob adjusts Wah frequency when in Contour Mode.

The MTBH2 is powered by a 9V battery or a 9VDC 300mA regulated adapter (center negative). It has a Deep Red Base, Glow-In-The-Dark Treadle Grip, and Glow-In-The-Dark Toe End Logo.

Here are some possible use cases for the MORLEY MTBH2:

  • Use the Wah mode to add a classic wah-wah effect to your guitar playing.

MORLEY MTBH2 is a wah pedal with switchless operation, meaning you simply step on to engage Wah and step off to go to bypass. It also has a Contour switch that selects a second Wah mode, and a Level knob that adjusts the output of the Wah in Bad Horsie and Contour Modes. The Contour knob adjusts Wah frequency when in Contour Mode.

The MTBH2 is powered by a 9V battery or a 9VDC 300mA regulated adapter (center negative). It has a Deep Red Base, Glow-In-The-Dark Treadle Grip, and Glow-In-The-Dark Toe End Logo.

Here are some possible use cases for the MORLEY MTBH2:

  • Use the Wah mode to add a classic wah-wah effect to your guitar playing.
THANK YOU FOR CHOOSING A MORLEY 20/20 BAD HORSIE WAH.
YOU NOW OWN THE BEST PEDAL MADE!
Please take a few minutes to familiarize yourself with the features of your new pedal.
We hope you enjoy using it as much as we enjoyed building it.
ABOUT OUR BUFFER CIRCUIT:
All Morley 20/20 pedals come equipped with our Buffer Circuit. This circuit prevents volume loss or tone
change to the instrument. It also allows the use of long cables or pedals boards with lots of pedals and
connection cables. You’ll sound and feel better GUARANTEED!
ABOUT OUR OPTICAL CIRCUITRY:
Optical design ensures smooth pedal control of Wah, volume and/or switching that won’t get scratchy and
wear out like potentiometer (pot) controlled pedals.
ABOUT THE CONNECTIONS:
9V: ONLY Morley's 9VDC 300 milliamp regulated adapter should be used.
IN: Input jack. Plug instrument into this jack using 1/4" guitar cable.
OUT: Connect amplifier to this jack using a 1/4" guitar cable.
USING AN AC ADAPTER:
All Morley pedals use Morley's 9VDC 300 milliamp regulated adapter. Center pin polarity is negative.
Using a non-regulated adapter could cause a low frequency hum in your amplifier. Using an adapter with
the wrong polarity may damage the pedal.
USING A BATTERY:
All Morley pedals are designed to use one 9V battery when not using an adapter. We suggest you use a
good quality alkaline battery. To prolong battery life, unplug your cord completely from the input jack when
not using the pedal. When the pedal is not used for extended periods, remove the battery from the pedal.
Our “Quick Clip” Bettery door allows easy access to battery compartment.
WARRANTY
All Morley® pedals are warranted for one year with copy of dated purchase receipt. To obtain warranty
service, contact store where pedal was purchased or email [email protected]
Lifetime warranty is available at no charge, register at www.morleyproducts.com
20/20 BAD HORSIE FEATURES (MODEL MTBH2 & MTBH2-EU):
·
·
SWITCHLESS OPERATION: Simply Step on to engage
Wah and step off to go to bypass.
·
CONTOUR SWITCH: Selects a second Wah mode. Silent
switching prevents switch noise from coming out of amp.
·
LEVEL: Adjusts the output of the Wah in Bad Horsie
and Contour Modes
·
CONTOUR: Adjust Wah frequncy when in Contour Mode
MTBH2 & MTBH2-EU SPECIFICATIONS:
Power: 9V Battery or 9VDC 300mA regulated (center negative)
Indicator (right): Wah on LED on, Wah off LED off
Indicator (left): Contour Wah on LED on
Dimensions: 6.75" L x 4.5" W x 2.75" H
Current Draw: 12 mA @ 9VDC
Weight: 2 lb./ 0.92 kg
www.morleyproducts.com
Deep Red Base
Glow-In-The-Dark Treadle Grip
Glow-In-The-Dark Toe End Logo
  • Page 1 1

MORLEY MTBH2 Owner's manual

MORLEY
Brand
MORLEY
Model
MTBH2
Category
Guitar accessories
Type
Owner's manual

MORLEY MTBH2 is a wah pedal with switchless operation, meaning you simply step on to engage Wah and step off to go to bypass. It also has a Contour switch that selects a second Wah mode, and a Level knob that adjusts the output of the Wah in Bad Horsie and Contour Modes. The Contour knob adjusts Wah frequency when in Contour Mode.

The MTBH2 is powered by a 9V battery or a 9VDC 300mA regulated adapter (center negative). It has a Deep Red Base, Glow-In-The-Dark Treadle Grip, and Glow-In-The-Dark Toe End Logo.

Here are some possible use cases for the MORLEY MTBH2:

  • Use the Wah mode to add a classic wah-wah effect to your guitar playing.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents